Search

The antibacterial performance of biocomposite films prepared from lignocellulosic waste (hazelnut husk or hazelnut leafy green cover) modified with silver nanoparticles and polylactic acid (PLA) was determined. The amount of hazelnut husk in the PLA matrix ranged from 10 to 40% by weight in 10% increments. The composite pellets were produced using a twin-screw extruder. Biocomposite films of 0.6 mm x 40 mm x 200 mm were produced from the pellets in a laboratory hydraulic hot press. The surfaces of the modified hazelnut husk and biocomposite specimens were analyzed by scanning electron microscopy (SEM) and inductively coupled plasma optical emission spectrometry (ICP-OES). The antibacterial activity of the biocomposite films against Staphylococcus aureus bacteria was determined using the ASTM E 2149 (2020) method. The antibacterial activity of the biocomposite films increased noticeably with the addition of hazelnut husk modified with the silver nanoparticles. Compared to the pure PLA film, the biocomposite films with 10 wt% modified husk flour showed the lowest antibacterial activity (31.3%) against S. aureus over 24-h while the films with 40 wt% showed the highest antibacterial activity (99.9%). The biocomposite films made of hazelnut husk flour with silver nanoparticles and PLA matrix could be considered for food packaging applications. [ABSTRACT FROM AUTHOR]

Next-generation laminated wood composites were produced using waste poplar (Populus deltoides) veneer and polyvinyl acetate adhesive. Four experimental groups and one control group were created. Ten-layer laminated wood veneer samples were reinforced with natural rubber (Group A), linoleum (Group B), felt (Group C), and elastomeric sponge (Group D); these materials were used in the fifth adhesive layer (middle layer). The sound absorption coefficients of the control and experimental groups were tested via the impedance tube method, according to ASTM standard E1050 (2006). Attention was paid to the acoustic behavior at low frequencies (63 Hz to 250 Hz), mid frequencies (250 Hz to 2000 Hz), and high frequencies (2000 Hz to 6300 Hz). It was determined that the sound absorption coefficient of the experimental groups considerably increased. It can be suggested that the experimental groups be used as sound absorbing acoustic panels and the control group as sound reflective acoustic panels. [ABSTRACT FROM AUTHOR]

Textile (cotton) dust, which is harmful to humans and the environment, is one of the largest wastes in the textile industry. The aim of this study was to investigate the potential use of this waste in high value-added materials. Physical and mechanical properties and formaldehyde emissions of the three-layered particleboards with textile (cotton) dust in the middle layer were investigated in this study. A phenol formaldehyde resin was used as the binder in particleboard production. Four different amounts of textile dust (10%, 20%, 30%, and 40%) based on the oven-dried weight of the wood were obtained from a commercial textile manufacturer as industrial waste. The density, thickness swelling, modulus of rupture, modulus of elasticity, internal bond, and formaldehyde emissions of the produced panels were determined. The physical and mechanical properties and formaldehyde emissions of the particleboards were negatively affected, which decreased with the addition of a high amount of textile powder. At low rates, the use of textile dust in the middle layer did not significantly decrease the particleboard properties. Textile dust can be a partial solution for the raw material demand of the wood-based panel industry. [ABSTRACT FROM AUTHOR]