Search

Global regulations are guiding society towards more sustainable material solutions. This increasing awareness of the need for environmentally friendly alternatives has led to a greater emphasis on biocomposites, which combine natural fibers with bio-based polymers. This study investigates how bleached softwood pulp fibers (BSWPF) and unbleached softwood pulp fibers (UBSWPF) affect the characteristics of poly(lactic acid) (PLA)-based biocomposites. UBSWPF is a more cost-effective option because it is manufactured with less processing steps than BSWPF. However, it is largely unexplored as a reinforcement in biopolymers. Through investigating the mechanical, thermal, and morphological aspects of the biocomposites, this study showed that UBSWP increased the modulus and impact strength of the PLA biocomposites better than BSWPF. The impact strength, modulus, and tensile strength of PLA-BSWPF and PLA-UBSWPF improved as the fiber content increased. However, a decrease in tensile strength was seen at higher percentages of UBSWPF in PLA. Despite the decrease in tensile strength at higher UBSWPF concentrations, both types of fibers improved the mechanical properties of the biocomposites, demonstrating a potential sustainable reinforcing material for PLA biocomposites. [ABSTRACT FROM AUTHOR]

Bioderived poly(lactic acid) (PLA) is a promising alternative for fossilbased polymers, but its poor hydrophilicity, high brittleness, and low heatresistance are problems for its utilization. In this work, bleached softwood kraft pulp (BSKP) fiber was adopted to modify PLA with MAPP as the coupling agent, with BSKP accounting for 10 wt% to 50 wt%. Internal mixing (IM) was applied to mix the PLA/fiber blend instead of screw grinding. The thermal and mechanical properties of the composites were assessed. The IM process was proven qualified for its effective dispersion of BSKP fibers in the PLA matrix. At a fiber loading of 50 wt%, IMprocessed composites acquired satisfactory tensile strength (50.49 MPa, slightly higher than PLA) and Young's modulus (2.56 GPa, 45.8% higher than PLA). The pulp fillers matched PLA matrix well for the characteristic temperatures in thermal decomposition. The BSKP/PLA composites were thermally strengthened by pulp fibers characterized by higher content of residues. The fibers improved the interfacial crystallinity of PLA in the composites (i.e., from 5.22% to 11.86%). The increased crystallinity resulted in enhanced stiffness or weaker damping performance of the composites. In conclusion, natural plant fibers are a feasible option to modify PLA for extended applications. [ABSTRACT FROM AUTHOR]

The agricultural industry is one of the main economic contributors in developing countries, especially in tropical regions. Extensive land clearing has led to severe erosion within the watersheds, which increases the vulnerability of water catchments to natural disasters, such as floods. Cellulosic fibers, such as jute, sisal, kenaf, hemp, and coir, are gaining increasing worldwide attention for their potential application in controlling soil erosion, principally due to their remarkable biodegradable and physical properties. Nonetheless, the research on biocomposites in controlling soil erosion is limited compared to the natural fibers. This is perhaps due to poor availability and high cost of biodegradable polymers compared to natural fibers, which are abundant and inexpensive. Poor adhesive interactions between the matrix and natural fibers due to the hydrophilic characteristic of the fibers is another major drawback that limits the development of biocomposites for controlling soil erosion. [ABSTRACT FROM AUTHOR]

One of the big global, environmental, and socioeconomic challenges of today is to make a transition from fossil fuels to biomass as a sustainable supply of renewable raw materials for industry. Growing public awareness of the negative environmental effects of petrochemical-based products adds to the need for alternative production chains, especially in materials science. One option lies in the value-added upcycling of agricultural byproducts, which are increasingly being used for biocomposite materials in transport and building sector applications. Here, sunflower by-product (obtained by grinding the stems) is considered as a source of natural fibers for engineered biocomposite material. Recent results are shown for the main mechanical properties of sunflower-based biocomposites and the socioeconomic impact of their use. This paper demonstrates that sunflower stem makes a good candidate feedstock for material applications. This is due not only to its physical and chemical properties, but also to its socioeconomic and environmental rationales. [ABSTRACT FROM AUTHOR]