Search

Herein, we report the secretome of Penicillium chrysogenum P33 under induction of lignocellulose for the first time. A total of 356 proteins were identified, including complete cellulases and numerous hemicellulases. Supplementing a commercial cellulase with increasing dosage of P33 enzyme cocktail from 1 to 5 mg/g substrate increased the release of reducing sugars from delignified corn stover by 21.4% to 106.8%. When 50% cellulase was replaced by P33 enzyme cocktail, release of reducing sugars was 78.6% higher than with cellulase alone. Meanwhile, glucan and xylan conversion was increased by 37% and 106%, respectively. P33 enzyme cocktail also enhanced commercial cellulase hydrolysis against four different delignified lignocellulosic biomass. These findings demonstrate that mixing appropriate amount of P33 cocktail with cellulase improves polysaccharide hydrolysis, suggesting P33 enzymes have great potential for industrial applications. [ABSTRACT FROM AUTHOR]

Phosphate accumulating bacterium Pseudomonas stutzeri YG-24 exhibited efficient heterotrophic nitrification and aerobic denitrification ability. Single factor experiments showed that both heterotrophic nitrification and aerobic denitrification occurred with sodium citrate as carbon source and lower C/N ratio of 8. High average NH 4 + -N, NO 2 − -N and NO 3 − -N removal rates of 8.75, 7.51 and 7.73 mg L −1 h −1 were achieved. The application of strain YG-24 in wastewater samples resulted in TN, NH 4 + -N, NO 2 − -N, NO 3 − -N and P removal efficiencies of 85.28%, 88.13%, 86.15%, 70.83% and 51.21%. Sequencing and quantitative amplification by real-time PCR of napA , nirS and ppk showed that nitrogen removal pathway of strain YG-24 was achieved through heterotrophic ammonium nitrification coupled with fast nitrite denitrification (NH 4 + -N to NO 2 − -N and then to gaseous nitrogen) directly. These results demonstrated the strain as a suitable candidate to simultaneously remove both nitrogen and phosphate in wastewater treatment. [ABSTRACT FROM AUTHOR]

Algae lipid production combined with heavy metal removal is a cost-effective and environment-friendly method for algae biofuel production and hazardous waste treatment. Chlorella minutissima UTEX 2341 had strong resistance to cadmium, copper, manganese and zinc ions under heterotrophic culture condition and could efficiently remove them through intracellular accumulation and extracellular immobilization. Meanwhile, lipid accumulation was not inhibited by heavy metals. Instead, the algae lipid content significantly increased by 21.07% and 93.90%, respectively with the addition of cadmium and copper. Furthermore, the heavy metal residue in lipid was within μg range and satisfied the commercial standard. This artificial wastewater-algae biofuel-heavy-metal integrated utilization technology offered a new alternative solution to the problems of energy shortage and environmental pollution. [ABSTRACT FROM AUTHOR]

Abstract: To reduce the cost of algal biomass production, mathematical model was developed for the first time to describe microalgae growth, lipid production and glycerin consumption under photoheterotrophic conditions based on logistic, Luedeking–Piret and Luedeking–Piret-like equations. All experiments were conducted in a 2L batch reactor without considering CO2 effect on algae’s growth and lipid production. Biomass and lipid production increased with glycerin as carbon source and were well described by the logistic and Luedeking–Piret equations respectively. Model predictions were in satisfactory agreement with measured data and the mode of lipid production was growth-associated. Sensitivity analysis was applied to examine the effects of certain important parameters on model performance. Results showed that S0, the initial concentration of glycerin, was the most significant factor for algae growth and lipid production. This model is applicable for prediction of other single cell algal species but model testing is recommended before scaling up the fermentation of process. [ABSTRACT FROM AUTHOR]

• A novel bifunctional xylanase/feruloyl esterase (rXyn10A/Fae1A) was obtained. • The highest ferulic acid yield (7.31 mg/g substrate) was produced by rXyn10A/Fae1A. • Inter-domain synergism of rXyn10A/Fae1A is essential for the release of ferulic acid. • Recombinant E. coli was constructed and secreted the bifunctional enzyme out of cells. • Co-production of ferulic acid and XOSs during the cultivation of recombinant E. coli. Liberating high value-added compounds ferulic acid (FA) and xylo-oligosaccharides (XOSs) from agricultural residues is a promising strategy for the utilization of lignocellulose. In this study, a bifunctional xylanase/feruloyl esterase from bacterial consortium EMSD5 was heterogeneously expressed in Escherichia coli. Depending on the inter-domain synergism of the recombinant enzyme rXyn10A/Fae1A, high yields of FA (2.78, 1.82, 1.15 and 7.31 mg/g substrate, respectively) were obtained from 20 mg in-soluble wheat arabinoxylan, de-starched wheat bran, ultrafine-grinding corn stover and steam-exploded corncob. Meanwhile, 3.210, 1.235, 1.215 and 0.823 mg xylose/XOSs were also released. For cost-saving enzyme production, we firstly constructed a recombinant E. coli , which could secrete the bifunctional xylanase/feruloyl esterase out of cells. When the recombinant E. coli was cultured in medium containing 200 mg de-starched wheat bran, 474 μg FA and 18.2 mg xylose/XOSs were also detected. Hence, rXyn10A/Fae1A and the recombinant strain showed great applied potential for FA and XOSs production. [ABSTRACT FROM AUTHOR]

• Bacterial consortium EMSD5 produced isopropanol from xylans efficiently. • 7.00 g/L isopropanol was produced from unpretreated corncob by consortia-based CBP. • Arabinose residues of xylan could enhance the CBP performance. • Clostridium beijerinckii and lignocellulose degraders performed CBP synergistically. Consolidated bioprocessing (CBP) of lignocellulose by bacterial consortium for isopropanol production is considered as the most promising strategy. However, low utilization of xylan caused by the complex sidechain structure remains inhibit the conversion of full-biomass. In this study, isopropanol production from different lignocelluloses by the consortium EMSD5 through CBP was performed. A total of 7.00 g/L of isopropanol was obtained from corncob by optimizing fermentation conditions. Isopropanol production by EMSD5 was mainly based on utilizing xylan in corncob and isopropanol titer was increased by 47.71% and reached up to 8.39 g/L using arabinoxylan compared with linear xylan. The analysis of community structures and the isolation of key strain confirmed the enrichment of the isopropanol producer, Clostridium beijierinckii , in the bacterial community when it was incubated with corn glucuronoarabinoxylan and the cooperation between C. beijerinckii and lignocellulose degraders. The unique features of EMSD5 could lead to large-scale isopropanol production using lignocellulose. [ABSTRACT FROM AUTHOR]

Abstract: High production cost is a major obstacle to the extensive use of microalgae biodiesel. To cut the cost and achieve higher biomass productivity, Chlorella minutissima UTEX2341 was cultured under photoheterotrophic conditions. With the carbon, nitrogen and phosphorus concentration of 26.37, 2.61 and 0.03gL−1 d−1 respectively, a maximum biomass productivity of 1.78gL−1 d−1 was obtained, which was 59 times more than that cultured under autotrophic condition. The lipid productivity reached 0.29gL−1 d−1, which was 11.9 times higher than the highest value reported by . The conversion rate of microalgae lipids to FAME was found to be elevated from 45.65% to 62.97% and the FAME productivity increased from 1.16 to 180.68mgL−1 d−1 after the optimization. 94% of the fatty acid of C. minutissima UTEX2341 was found to be composed of palmitic, oleic, linoleic and γ linoleic and the unsaturated fatty acids were the main parts (79.42%). [Copyright &y& Elsevier]

Abstract: In this study, the feasibility of bioflocculant extraction from backwashing sludge to reduce its production costs was investigated. Results showed that ultrasound and base treatment could significantly enhance bioflocculant extraction efficiency, however, flocculating activity was affected. It was observed that bioflocculants extracted from sludge of pH 11.0 had no flocculating activity. In contrast, bioflocculants extracted from sludge of pH 5.0, named as M-1, had good flocculating activity. To further study the flocculating activity of M-1, factors such as bioflocculant dosage, temperature and pH of the reaction solution were tested. The optimal conditions were 6.0mg/l bioflocculant dosage and pH 5.0, at a temperature of 10°C. Under these conditions, the flocculating rate of kaolin clay was 92.67%. The effectiveness of such bioflocculants in the decolorization of synthetically dyed wastewater was then examined. In flocculating methylene blue and fast blue in aqueous solutions, decolorization efficiency levels were 82.9% and 77.8%, respectively. [Copyright &y& Elsevier]

[Display omitted] • Distinct pretreated substrate can be used as inducer for specific enzyme production. • Formulation of cocktails with distinct components improved the hydrolysis efficiency. • 100% glucose and xylose of ultrafine grinding treated corn stover were obtained. In order to optimize the composition of enzyme cocktail for improving the hydrolytic efficiency of lignocellulose, different substrates were tested as inducers for producing lignocellulolytic enzymes by Trichoderma harzianum EM0925 in this study. As results, ultrafine grinding or steam explosion pretreated substrates can induce T. harzianum EM0925 to secret holo lignocellulolytic enzymes; acid treated substrate can induce cellobiohydrolase; while alkali or sodium chlorite treated substrates can induce β-xylosidase specifically. Furthermore, the combination of enzyme cocktails with different hydrolysis characteristics can further improve the hydrolysis efficiency, since 100% yields of glucose and xylose were obtained simultaneously from ultrafine grinding treated corn stover at low enzyme dosage (1.2 mg proteins/g substrate). This study for the first time demonstrated an effective solution that specific-pretreated substrates can be used as inducers for specific enzyme production by T. harzianum , which provided new idea and potential strategy for the construction of highly-efficient lignocellulolytic enzyme cocktails. [ABSTRACT FROM AUTHOR]

Highlights: [•] Environmental factors were proved to be helpful to lipid accumulation. [•] NaCl, Fe3+ and nitrogen starvation together made lipid content increase to 2.5 times. [•] Both high and low temperature could promote lipid accumulation. [•] UTEX 2341 was proved to be a potential species for high-quality biodiesel production. [ABSTRACT FROM AUTHOR]

Abstract: A novel intracellular bioflocculant (named MBF-W6) produced by Chryseobacterium daeguense W6 cultured in low nutrition medium was investigated in this study. The effects of carbon source, nitrogen source, C/N ratio, initial pH, inoculum size, culture temperature and shaking speed on MBF-W6 production were studied. Chemical analysis showed that the purified MBF-W6 was mainly composed of 32.4% protein, 13.1% polysaccharide and 6.8% nucleic acid. Fourier-transform infrared (FTIR) spectroscopy indicated the presence of carboxyl, hydroxyl, and methoxyl groups. The elemental analysis of purified MBF-W6 revealed that the mass proportion of C, H, O, N and S was 40.92:6.53:44.01:8.53:1.01 (w/w) correspondingly. MBF-W6 had good flocculating rate in Kaolin suspension without any cation addition. The highest flocculating rate of 96.9% was achieved under the optimal conditions (bioflocculant dosage 1.2mgl−1, pH 5.6 and temperature 15°C). [Copyright &y& Elsevier]

Abstract: Conversion of acorn fringe extract into ellagic acid production by Aspergillus oryzae and Endomyces fibuliger were investigated. The results showed that ellagic acid production was maximized when co-fermentation of the two fungi was performed at 30°C and pH 5.0 with 5.7g/l of initial substrate concentration, which were close to the optimal values for both fungi to yield an appropriate consortium of hydrolytic enzymes. Meanwhile, it was found that the co-fermentation could compensate the deficiencies in the level of polyphenol oxidase activity from pure A. oryzae and the levels of ellagitannin acyl hydrolase and β-glucosidase activities from pure E. fibuliger, resulting in. 0.91g/l of biomass concentration containing 1.84g/l of ellagic acid. The research not only demonstrates that the co-fermentation is an effective approach to utilize forest byproduct for ellagic acid production, but also provides more evidences for understanding evolution of ellagic acid production with enzymes actions, which is important for process control of ellagic acid production in industrial application. [Copyright &y& Elsevier]