Search

The feasibility of implementing encapsulation technology for the biological anaerobic treatment of high-strength wastewater was investigated. The small pilot-scale wastewater treatment process, deployed at a local brewery, consisted of a 4-L fermenting first-stage reactor containing alginate-encapsulated fermenting microorganisms and a 30-L methanogenic second-stage reactor containing alginate-encapsulated anaerobic digester sludge (CH4E reactor). A parallel second-stage 30-L anaerobic membrane bioreactor (AnMBR) was operated for comparison. The first-stage reactor produced 40.4 ± 47.3% more volatile fatty acids than present in the influent wastewater. The CH4E reactor stared rapidly, with an off-gas methane content >60% after 14 days. It took >1 month for the AnMBR to achieve this performance. Nevertheless, the CH4E reactor performance declined relative to the AnMBR over time. This was thought to be a result of encapsulant leakage and the encapsulation of a non-ideal initial community. Further optimization is needed, but encapsulation shows promise for small-footprint anaerobic biological treatment applications.

The present study proposes a system for co-composting food waste and poultry manure amended with rice husk biochar at different doses (0, 3, 5, 10%, w/w), saw dust, and salts. The effect of rice husk biochar on the characteristics of final compost was evaluated through stabilization indices such as electrical conductivity, bulk density, total porosity, gaseous emissions and nitrogen conservation. Results indicated that when compared to control, the biochar amendment extended the thermophilic stage of the composting, accelerated the biodegradation and mineralization of substrate mixture and helped in the maturation of the end product. Carbon dioxide, methane and ammonia emissions were reduced and the nitrogen conservation was achieved at a greater level in the 10% (w/w) biochar amended treatments. This study implies that the biochar and salts addition for co-composting food waste and poultry manure is beneficial to enhance the property of the compost.

Phenols and petroleum hydrocarbons were the main contributors to COD in semi-coking wastewater, and their removal was urgent and worthwhile. The microbial strains were selected to construct microbial community for the wastewater treatment. The concentration of phenols was decreased from 2450 ± 1.2 mg/L to 200 ± 0.9 mg/L, and the removal rate of petroleum hydrocarbons was up to 97.08 ± 0.09 % by microorganisms. After phenolic compounds with high toxicity were removed by bioaugmentation, the treated semi-coking wastewater was more biodegradable, and its water quality has been significantly improved. Through GC–MS and high-through sequencing technology, the metabolic division of labor in degradation of phenols, ring-cleavage of aromatic compounds, mineralization of metabolites was further revealed. The microbial community consisting of Pseudomonas stutzeri N2 and Rhodococcus qingshengii FF could effectively and simultaneously remove phenols and petroleum hydrocarbons, and these two strains possess great potential of being applied in aerobic biological treatment process of large-scale semi-coking wastewater.

Acid pretreatment was insufficient to disrupt the recalcitrance derived from lignins in softwood, thus a lignin-targeting post-treatment was required. In this study, a combined acid and alkali pretreatment with polyethylene glycol-epoxides (PEG-epoxides) was developed on masson pine. Results showed although the combined pretreatment achieved a limited delignification, but a remarkably increment of 15.9-34.9% on hydrolysis yields was achieved. This was ascribed to the successful incorporation of hydrophilic PEG chains to residual lignins. Moreover, the improvement on enzymatic digestibility varied with the PEG chain lengths in modifiers. The underlying reasons for this improvement were primarily investigated by monitoring the lignin properties as well as water retention values variation after in-situ lignin modification by PEG-epoxides with varied molecular weights. It indicated that the enzymatic hydrolysis improvement was mainly due to both reduced enzyme nonspecific adsorption and increased fiber swelling. Results will give new insights to resolve the challenge on softwood biorefinery.

Electrocoagulation is a promising technology to harvest microalgal biomass. However, the commonly used aluminum electrodes release undesired salts that decrease biomass value. In this study, alternative iron, zinc, and magnesium electrodes and operational parameters pH, time and current density were studied to harvest Nannochloropsis oceanica. For recovery efficiency and concentration factor the initial pH was most important using iron electrodes, while time and current density were more relevant using zinc and magnesium electrodes. Optimal parameters resulted in biomass recovery efficiencies > 95%, biomass was concentrated 2.8-7.2 times and contained 15.7-29.1% ashes. Elemental analysis revealed metal salts in harvested biomass resulting from electrode corrosion. Finally, ash contents could be reduced by 65% using EDTA as a chelating agent. The electrocoagulation harvested microalgal biomass enriched in essential metals may be a promising bioresource for agricultural growth inducers, or functional ingredients for feed. info:eu-repo/semantics/publishedVersion

The main purpose of this study was to explore the effects of Fenton pretreatment combined with bacterial inoculation on humification characteristics of dissolved organic matter (DOM) during rice straw composting. Three treatment groups (Fenton pretreatment: FeW, Fenton pretreatment and bacterial inoculation: FeWI, control: CK) were carried out during composting. The results showed that total organic carbon concentration of DOM and HIX showed an increase trend in all treatments in the composting process. The fungi that affect DOM conversion showed remarkable effects, meanwhile, fungal numbers of influencing DOM conversion were higher for FeWI than CK and FeW. The contribution rate of fungi to DOM was greater than that of environmental factors in FeWI composting, while environmental factors accounted for a large proportion in FeW and CK composting. This study exhibits referential significance for the effective degradation of agricultural wastes.

The chemical structure of lignin has an important effect on the lignin pyrolysis product distributions. Therefore, it is of great significance to regulate the selectivity of pyrolysis products by modifying the lignin structure. Herein, deep eutectic solvents (DESs) including choline chloride/ethylene glycol (CE), zinc chloride/ethylene glycol (ZE) and choline chloride/acetic acid, treatment of softwood kraft lignin (SKL) is demonstrated. Systematic characterization indicate that the DESs are not only highly conducive to increasing the hydrogen to carbon efficient ratio, reducing the molecular weight and β-O-4 linkage, but also contributes to the maximum degradation rate and thermal stability of SKL. Noticeably, CE and ZE treatment are significantly improved the amount of H-phenols and C-phenols derived lignin pyrolysis, respectively. In addition, DESs pretreatment are also beneficial to the increment of monomer aromatic hydrocarbons. More importantly, the CE pretreatment contributes to the improvement of bio-oil yield and decrease of char content from lignin pyrolysis.

Lactic acid (LA) is an essential commodity chemical, with bio-based LA ruling the market share. Macroalgae are a desirable feedstock for LA fermentation due to their high carbohydrate and low lignin content. Ulva sp., Gracilaria sp., and Sargassum cristaefolium were evaluated as a feedstock for LA fermentation. Mild acid-thermal hydrolysis (sulfuric acid concentrations 5%) resulted in superior reducing sugar recovery. Gracilaria sp. attained maximum reducing sugar recovery (0.39 g/g biomass) and lactate yield (0.94 g/g). LA fermentation of fucose-rich hydrolysate of Sargassum cristaefolium is demonstrated for the first time, with 0.81 g/g LA yield and 0.36 g/g reducing sugars. Ulva sp. attained 0.21 g/g reducing sugars and 0.85 g/g LA yield. The efficiency of macroalgae for lactate bioconversion was in the order: red macroalgae green macroalgae brown macroalgae. L. rhamnosus and L. plantarum could efficaciously utilize seaweed sugars for LA production. Macroalgae can potentially replace lignocellulosic biomass as a feedstock in LA fermentation.

The alteration of antibiotic resistance genes (ARGs) during sludge composting has been less studied in a full-scale plant, causing the miss of practical implications for understanding/managing ARGs. Therefore, this study tracked the changes of ARGs and microbial communities in a full-scale plant engaged in excess sludge composting and then explored the key factors regulating ARGs through a series of analyses. After composting, the absolute and relative abundance of ARGs decreased by 91.90% and 66.57%, respectively. Additionally, pathway analysis showed that MGEs, composting physicochemical properties were the most vital factors directly influencing ARGs. Finally, network analysis indicated that Proteobacteria, Bacteroidetes, Firmicutes, and Actinobacteria were the main hosts of ARGs. Based on these findings, it can be known that full-scale composting could reduce ARGs risk to an extent.

In this work, effects of sulfomethylated lignins (SLs) prepared from masson pine (SLM) and poplar (SLP) on enzymatic hydrolysis and cellulase-lignin interaction were comparatively investigated. The results showed that both SLM and SLP significantly promoted the substrate enzymatic digestibility. The total sugar yield increased from 38.6% to 74.4% and ∼100%, respectively at 10 FPU/g-cellulose of cellulase dosage. The protein content in hydrolysate linearly increased with the addition of SL (0 – 1.6 g/g-substrate lignin), which suggested the competitive adsorption of cellulase may occur to substrate lignin and SLs. Further structural analysis of lignin revealed the high S/(V+H) ratio was directly related to the high enzymatic saccharification efficiency. The strong interaction between SL and cellulase decreased the nonproductive adsorption of cellulase onto substrate lignin and increased the accessibility of cellulase to carbohydrate, which was considered to be the key factor for the improvement of substrate enzymatic digestibility.

To investigate the effect of hemicellulose removal on subsequent choline chloride and lactic acid (ChCl-LA) based deep eutectic solvent (DES) extraction of wheat straw lignin, ChCL-LA of DES and hot water presoaking pretreatments were used for hemicellulose prehydrolysis. Both presoakings led to a significant hemicellulose removal and introduced morphological changes on fiber cell wall surface. DES presoaking also instigated ether bonds cleavage between lignin and hemicellulose and selectively removed lignin in compound middle lamella (CML) and cell corner (CC) leading to cell wall disruption and swelling which facilitated lignin extraction. Hot water presoaking removed more hemicellulose and caused a migration of lignin to fibers surface, but did not improve subsequent lignin extraction. This study demonstrated that a two-stage DES treatment method, presoaking at room temperature followed by extracting at an elevated temperature, is a viable process to produce high yield and purity of lignin.

Denitrification during composting is a hidden danger that causes environmental pollution risk and aromatic humic substance damage, which needs to be better regulate urgently. In this study, two denitrification regulation methods, moisture and biochar amendment, were conducted during chicken manure composting. Denitrification performance data showed two regulation methods obviously reduced NO3−-N, NO2−-N and N2 contents. Humic substance increased by 25.3 % and 29.1 % under two regulations. Microbiological analysis indicated that two regulation methods could decreasing denitrifying functional microbes with aroma degradation capability. Subsequently, denitrification gene narG, nirS, nosZ were significantly inhibited (p

This research explored the influence of distillers' grains amendment on the humification performance and microbial communities during rice straw composting. The composition of dissolved organic matter and maturity index were analyzed by the fluorescence excitation emission matrix spectroscopy and parallel factor analysis. High-throughput sequencing and redundancy analysis were employed for revealing the structure dynamics for microbial community and their shaping factors, respectively. Results indicated that addition of distillers' grains effectively increased the microbial activity, which was beneficial to the organic matter degradation and nitrogen conservation. Microbial community structures were significantly changed with different amendment strategies. Nitrate, water soluble carbon, organic matter, ammonium were the key parameters influencing the variation of bacterial community in different treatments. Water soluble carbon significantly affected the dominant fungal community dynamics. These results showed that addition of distillers' grains effectively improved the nutritional status and changed the microbial communities during rice straw composting.

With increased interest in the biodegradation of lignin, there is a pressing need to evaluate the feasibility of using microorganisms for lignin degradation. A novel Bacillus strain was separated from compost and identified as Brevibacillus thermoruber. B. thermoruber showed excellent performance in lignin degradation and degraded 81.97% of lignin after 7 d, which was similar to the lignin degradation rate of fungi. The biodegradation of lignin G and H monomers mainly proceeded via the β-ketoadipate pathway at 37 °C. At 55 °C, the degradation product of lignin S monomer was mainly a benzoic acid substance, indicating that the lignin was degraded via the benzoic acid pathway. The degradation products of lignin are important precursors for humus formation in compost. The results of this study provide new insights into the biodegradation pathway of lignin in different stages of composting.

Ensuring the processing of food waste from the production of food and beverages in the automatic composters can be difficult because of the physicochemical properties of input raw materials. Very often, the final product does not meet the requirements for composts according to the European Compost Network. Optimisation of input food waste from the production of beverages was performed by the addition of the bulk materials such as sawdust and clay minerals (bentonite). Toxicity of the compost is caused by organic compounds with polar and non-polar properties. These compounds belong to the groups of alcohols, aldehydes and ketones, carboxylic acids, tannin, and phenols, coumarins and terpenes. Phytotoxicity is mostly influenced by the group of terpenes. The addition of sawdust used as bulking agent decreases the concentrations of almost all chemical compounds. The group of tannin and compounds containing phenols represents an exception because these compounds are released from sawdust.

Post-digestate treatments may reduce the risk linked to Antibiotic Resistant Genes (ARGs) release with digestate direct land application. Thus, this study aimed to evaluate post-digestate composting and co-composting with biogas production feedstock (maize silage, food processing waste, and poultry litter) effect on abundance of selected ARGs: erm(B), tet(K), tet(M), tet(O), and tet(S) genes. More than 80% of all ARGs were removed after 90 days of composting but removals from co-composting were lower. Bacteroidetes, Firmicutes, and Proteobacteria dominated fresh digestate, and a network analysis indicated that these were potential hosts of ARGs. The emergence of Actinobacteria (dominant), Planctomycetes, and Verrucomicrobia phyla during composting shifted the microbial composition. Moreover, canonical correspondence analysis showed trace elements explaining 90% variations in ARGs abundance. The study illustrates significance of post-digestate composting in mitigating ARGs release, and effectiveness could be linked to shift in microbial composition and trace elements release.

The current study evaluated the quality of agricultural waste digestate by composting or co-composting with biogas feedstock (maize silage, food processing waste, or poultry litter). Temperature, phytotoxicity, C/N ratio, water extractable trace elements, and 14 enzyme activities were monitored. Temperature dropped earlier in digestate and maize silage co-composting pile, reducing time to maturity by 20 days. Composting and co-composting reduced phytotoxicity and C/N ratio, but increased immobilization of Al, Ba, Fe, Zn, and Mn at least by 40% in all piles. All the enzyme activities, except arylsulfatase and α-glucosidase, increased at the maturity phase and negatively correlated with organic matter content and most of trace elements. Post-digestate composting or co-composting with biogas feedstock is a promising strategy to improve digestate quality for fertilizer use, and selected enzyme activities can be indicators of compost maturity and immobilization of trace elements.

This study presents a promising biological co-upgrading of ethanol-assisted depolymerized lignin (EDL) into protocatechuic acid (PCA) and polyhydroxyalkanoic acid (PHA) without any separation process. A depolymerized alkali lignin containing various G-lignin-type monomers at a concentration of 77 mg/mL was used for co-upgrading. An engineered Pseudomonas putida KT2440 strain was constructed by knocking out the protocatechuate 3, 4-dioxygenase, expression of the formaldehyde utilization pathway, and the expression of aldehyde dehydrogenase to enhance the efficiency of the ethanol utilization pathway. The growth and production of value-added bioproducts have been promoted by the utilization of formaldehyde, resulted in 6.73 ± 0.26 mg/L of PCA with a 17.5% (w/w) yield of total lignin monomers, and 303.66 ± 26.75 mg/L of PHA with 21.26% (w/w) of dry cell weight from 0.5 mL EDL. Moreover, the ethanol solvent used for lignin depolymerization was also utilized along with depolymerized lignin for co-upgrading to value-added products.

A novel one-pot synthesis method was developed to prepare modified hydrochar by co-hydrothermal carbonization of waste distillers grains using low-cost clay minerals (attapulgite or vermiculite). The loading of the clay minerals onto hydrochar surfaces altered the structure and surface composition of the hydrochar such that the clay-modified hydrochars showed better ability to adsorb methylene blue and phosphate in aqueous solution than the pristine hydrochar. The maximum methylene blue and phosphate adsorption capacities of the modified hydrochar reached 340.3 and 96.9 mg g−1, respectively, comparable or higher than that of many commercial sorbents. Multiple mechanisms, including electrostatic attraction, ion exchange, complexation, and physical adsorption, controlled the adsorption process. These results highlight excellent potential for distillers grains-derived hydrochar-clay composites as an environmental sorbent, capable of removing a variety of contaminants from aqueous solutions.

Anaerobic digestion (AD) of lignocellulosic biomass has received significant attention for bioenergy production in recent years. However, hydrolysis is a rate-limiting in AD of such feedstock. In this study, effects of hydrothermal pretreatment of Napier grass, a model lignocellulosic biomass, on methane yield were examined through series of batch and semi-continuous studies. In batch studies, the highest methane yield of 248.2 ± 5.5 NmL CH4/g volatile solids (VS)added was obtained from the biomass pretreated at 175 °C, which was 35% higher than that from the unpretreated biomass. The biomass pretreated at 200 °C resulted in formation of 5-hydroxymethylfurfural and furfural, which significantly inhibited methanogenesis. In semi-continuous studies, digester fed with the biomass pretreated at 200 °C at organic loading rate (OLR) of 4 g VS/L.d resulted in digester failure. Thus, OLRsoluble/OLRtotal ratio

Two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, originally isolated from non-acidophilic environment, were tested for their ability to withstand higher concentrations of an invasive heavy metal, cadmium (Cd), at an acidic pH of 3.5 and produce biomass rich in biodiesel. The growth analysis, in terms of chlorophyll, revealed that strain MAS1 was tolerant even to 20 mg L−1 of Cd while strain MAS3 could withstand only up to 5 mg L−1. When grown in the presence of 2 mg L−1, a concentration which is 400-fold higher than that usually occurs in the environment, the microalgal strains accumulated >58% of Cd from culture medium at pH 3.5. FTIR analysis of Cd-laden biomass indicated production of significant amounts of biodiesel rich in fatty acid esters. This is the first study that demonstrates the capability of acid-tolerant microalgae to grow well and remove Cd at acidic pH.

The present study was mainly focused on the production of biodiesel from Calophyllum inophyllum oil. The oil was characterized by GC–MS and stored for biodiesel production. The heterogeneous catalyst was synthesized for effective production of biodiesel. The synthesized catalyst was found to have good activity and stability. The surface and element characterization of zinc doped calcium oxide was characterized by SEM and EDAX. The size of nanocomposite was found to be in the range of 14.3–65.6 nm. The EDAX has confirmed the presence of zinc on the surface of the calcium oxide. The maximum biodiesel yield of 89.0% (v/v) was obtained at 55 °C in 80 min and catalyst concentration of 6% (w/v). The optimized methanol:oil molar ratio was obtained at 9:1 for the production of biodiesel. The produced methyl ester was confirmed by GC–MS analysis.

In this paper, the influence of clay amendment on antibiotic resistance genes (ARGs) fate and their relation with bacterial diversity in poultry manure (PM) composting was evaluated. The results confirmed that 4% clay amendment was significantly reduce the relative abundances (RAs) 94% of ARGs, while higher dosage of clay blended treatments (T5 and T6) composts were observed relatively very high percentage of ARGs as compared to other clay blended treatments. Clay addition play potential role on the occurrence and distribution of ARGs during the composting by altering the overall RAs of Firmicutes and Proteobacteria, and there host bacterial species. The heat map correlation figure also indicated that reduction of ARGs was significantly associated with the alteration of microbial dynamics and physicochemical parameters during the composting. Therefore, the addition of 4% clay in to PM composting system could efficiently mitigate the greater concentration of ARGs in PM compost and also environmental risk associated with its application.

Biomass catalytic pyrolysis with various metals (Zn, Fe, Ca, Ce and La) modified ZSM-5 catalysts were analyzed, in order to investigate the relationship between the physicochemical properties of catalysts and the benzene, toluene and xylene (BTX) products. Results revealed that the BTX products were positively correlated with the strong acid site contents of the catalysts. Appropriate amount (0.5–4 wt%) of loaded Zn species increased the strong acid site contents of the catalysts as well as BTX yields, and the highest yield of BTX was observed under Zn loading amount of 2 wt%. While excessive metal loading amount (10 wt%) decreased both the acidity and the physical properties of the catalyst, resulting in poor diffusion of reactants and products in the channel and decreased the BTX yield. It is recommended that ZSM-5 catalyst with higher strong acid site content and pore volume should be used for BTX production.

Metals in traces are vital for microalgae but their occurrence at high concentrations in habitats is a serious ecological concern. We investigated the potential of two acid-tolerant microalgae, Desmodesmus sp. MAS1 and Heterochlorella sp. MAS3, isolated from neutral environments, for simultaneous removal of heavy metals such as copper (Cu), iron (Fe), manganese (Mn) and zinc (Zn), and production of biodiesel when grown at pH 3.5. Excepting Cu, the selected metals at concentrations of 10–20 mg L−1 supported good growth of both the strains. Cellular analysis for metal removal revealed the predominance of intracellular mechanism in both the strains resulting in 40–80 and 40–60% removal of Fe and Mn, respectively. In-situ transesterification of biomass indicated enhanced biodiesel yield with increasing concentrations of metals suggesting that both these acid-tolerant microalgae may be the suitable candidates for simultaneous remediation, and sustainable biomass and biodiesel production in environments like metal-rich acid mine drainages.

Converting lignin into value-added products in current lignocellulosic biorefineries has been challenging, which in turn restricts the commercialization of many lignocellulosic biorefineries. In this work, a two-stage alkali-oxygen assisted liquid hot water pretreatment (AlkOx) was proposed as the first step of biorefinery. This alkali-oxygen pretreatment facilitated biomass fractionation by solubilizing majority of lignin in water-soluble fraction, while remaining most of cellulose and hemicellulose in water-insoluble fraction. As a result, biomass saccharification was significantly improved by selective removal and oxidative modification of lignin through alkali-oxygen pretreatment. Moreover, lignin residues from both pretreatment hydrolysate and enzymatic hydrolysate were shown to be favorable adsorbents for Pb(II) ions, with adsorption capacity of 263.16 and 90.91 mg/g, respectively. Results demonstrated that this integrated process could not only improve biomass saccharification but also enable lignin valorization, which encouraged the holistic utilization of lignin residues as part of an integrated biorefinery.

This study was conducted to assess the effect of thermophilic actinomycetes inoculation on the lignocellulose degradation, enzyme activities and microbial community during different types of straw composting from wheat, rice, corn and soybean. The results showed that actinomycetes inoculation not only changed the structure of actinomycetic and bacterial community but also accelerated the degradation of cellulose, hemicellulose and lignin and increased the key enzymes activities including CMCase, Xylanase, manganese peroxidase, lignin peroxidase and laccase during composting particularly from wheat straw and rice straw. The key enzyme and physiochemical parameters which affected organic fractions degradation have been identified by redundancy analysis. The combined application of actinomycete inoculation and urea addition as a source of nitrogen was suggested to regulate the key enzyme activities and lignocellulose degradation, which lays a foundation for effectively managing organic wastes from different types of crop straws by composting.

Lignin valorization is significantly hindered by the intrinsic heterogeneity of its complex structures and variability of biomass feedstocks. Fractionation of lignin can overcome these challenges by producing functionally distinct lignin cuts that can be further tailored to end products. Herein, lignin was extracted and depolymerized from poplar by the co-solvent enhanced lignocellulosic fractionation method with renewable THF to obtain CELF lignin. Several solvents were screened to separate soluble and insoluble fractions from the parent CELF lignin. The ethanol soluble portion was then fractionated into different molecular weight cuts via sequential precipitation of the lignin by reducing the concentration of THF. The physicochemical structures of different CELF lignin cuts were elucidated by GPC and NMR techniques. These results suggest that CELF lignin cuts with lower molecular weight contain progressively higher phenolic and carboxylic acid OH groups, which can be more suitable as green antioxidants than the parent lignin.

The present study determined the dynamic changes of bacterial community structures and its metabolism functions in rice straw composting process with different types of biochar addition. Results showed that both wheat and maize straw biochar addition greatly increased the temperatures and germination index. Biochar addition influenced microbial community structure and metabolic characteristics of the compost. Firmicutes, Actinobacteria and Proteobacteria were the dominant phyla throughout the process, and both biochar addition significantly increased the relative abundance of Actinobacteria phylum, especially genus Saccharomonospora. The abundance of bacterial genes related to amino acid metabolism, carbohydrate metabolism and energy metabolism were also increased with biochar addition. Moreover, total nitrogen was strongly affected by biochar addition and had the greatest influence on the bacterial community structure. These results indicated that biochar addition improved the maturity and fertility of the compost product as well as significantly regulated the microbial community structure and functions during composting process.

In recent years, lignin valorization is commercially an important and advanced sustainable process for lignocellulosic biomass-based industries, primarily through the depolymerization path. The conversion of the lignin moieties into biofuels and other high value-added products are still challenging to the researchers due to the heterogeneity and complex structure of lignin-containing biomass. Besides, the involvement of different microorganisms that carries varying metabolic and enzymatic complex systems towards degradation and conversion of the lignin moieties also discussed. These microorganisms are frequently short of the traits which are obligatory for the industrial application to achieve maximum yields and productivity. This review mainly focuses on the current progress and developments in the pretreatment routes for enhancing lignin degradation and also assesses the liquid and gaseous biofuel production by fermentation, gasification and hybrid technologies along with the biorefinery schemes which involves the synthesis of high value-added chemicals, biochar and other valuable products.

To develop a cost-effective, time-saving and efficient saccharification system for converting biomass into mono-/oligo-saccharides for production of bioethanol or other biochemicals, a relatively low recalcitrant and widely available biomass Agave americana was selected as feedstock. During the investigation of efficient enzyme cocktail, pectinase, which usually is neglect for biomass saccharification, was confirmed that it dramatically improves the saccharification of agave biomass. A production-friendly fungal strain of Aspergillus niger Gyx086 was employed for low-cost enzyme cocktails production using wheat straw as substance. The enzyme cocktail which was with hyperactive pectinase activity of 6.29 ± 0.42 U/ml could efficiently saccharify un-pretreated agave biomasses. As a result, under a mild condition at 35 °C in less than 72 h, most of the polysaccharides were completely converted into reducing sugar. The low-cost, process-simplified, and efficient biotechnology should stimulate the development of agave as feedstock for green energy and bio-based products production.

In this article, the changes in carbon, nitrogen components, and humic substances during organic-inorganic aerobic co-composting, with adding biochar as an additive or not, were studied. Results showed that adding a certain amount of inorganic fertilizers had no adverse effects on the compost fermentation process. Biochar enhanced the temperature, pH, oxygen content in the compost piles and ultimately hastened the fermentation process. Biochar contributed to the decomposition of hemicellulose, cellulose, lignin and promoted compost humification. Adding biochar increased the contents of acid hydrolysis nitrogen, amino acid nitrogen, amino sugar nitrogen, unidentified organic nitrogen and decreased the content of ammonia organic nitrogen thus improved nitrogen transformation and reduced nitrogen loss. The addition of biochar increased the nutrients contents in mature composts. The amendment of 10-15% biochar by weight as an additive would be optimum for the co-composting of organic-inorganic materials. These results contributed to produce value-added composting fertilizers.

Hydrothermal pretreatment is commonly used for enhancing enzymatic hydrolysis of lignocellulosics. Spruce and wheat straw were pretreated with increasing severity and lignin characteristics were analysed. The effect of enzymatically isolated lignin on the hydrolysis of Avicel and the adsorption of a cellobiohydrolase onto lignin was measured. Non-pretreated lignins had only a minor effect on Avicel hydrolysis. The structural changes in lignin accompanying hydrothermal pretreatment were associated with increased binding and inactivation of the cellulase on the lignin surface. The inhibitory effect was more pronounced in spruce than in wheat straw lignin. However, similar pretreatment severities caused similar levels of inhibition in Avicel hydrolysis for both biomass sources. The combined severity factor of the pretreatment correlated well with the inhibitory effect of lignin.

Synergistic fungal pretreatment involving white-rot and brown-rot fugal pretreatment has shown great potential for enhancing the yield of sugars from biomass time-effectively and environmentally benign. In this work, the effects of this integrated fungal pretreatment on lignin characteristics and thermal behavior of corncob were examined in the view of whole plant valorization. The results show that an efficient deconstruction of lignin was achieved by white-rot fungus, and subsequent brown-rot fungus promoted the preferential breakdown of guaiacyl units, further enhancing lignin extraction efficiency (62.3%). Consequently, less phenolic hydroxyl, methoxyl, tricin, ester-linked p-coumaric acid, more carboxylic acid, ratio of syringyl to guaiacyl units, β-O-4' linkage and molecular weight were found in W-BL. Thermal stability was improved and the increased phenol and alkyl-phenols contents in pyrolysis products demonstrated that synergistic fungal pretreatment definitely improved the lignin oil quality. These discoveries provide new insights into set strategy for microbial screening, pretreatment and lignin processing.

Biodiesel production using microbial oil is a promising technology. The main aim of this study is to check practical feasibility (in terms of energy balance) of different biodiesel production processes. Mass and energy balance of biodiesel production have been performed for 3 separate processes: (1) microbial lipid production from T. oleaginosus using waste substrates followed by INRS downstream process (2) microbial lipid production from pure substrate using R. toruloides followed by traditional and INRS downstream process and 3) oil extraction from scum and conversion to biodiesel. It was found that employing waste substrates like crude glycerol and municipal sludge in fermentation reduced the energy input by 50%. While employing biodegradable surfactants and petroleum-diesel as solvent (PD) for lipid extraction and recovery significantly reduced the energy input at cell wall disruption step. Biodiesel production from scum is a two-step process which is fast and energetically favorable.

This study explains how small operational differences support excellent granulation in aerobic granular reactors. Short settling time promoted granulation in AGS reactor. Gene expressions based on mRNA revealed much higher ammonium monooxygenase (amoA) in conventional reactor biomass than in the aerobic granular reactor (AGS) biomass during a complete cycle operation. The number of glycogen accumulating organisms in conventional was much higher than in the granular reactor. The denitrifying functional genes in the granular systems were upregulated in anaerobic and aerobic phases. The granular reactor removed 1.84 kg COD-m−3day−1, 0.09 kg NH4+-N-m−3day−1, and 0.063 kg PO43—P-m−3day−1. The conventional reactor removed 1.14 Kg-m−3day−1 COD, 0.05 kg-m−3day−1 NH4+-N, and 0.028 kg-m−3day−1 PO43−-P. The granular reactor showed faster kinetics for nutrient and organics removal compared to the conventional reactor. Flocs in the conventional reactor had a lower abundance of Candidatus accumulibacter sp. and higher relative abundance of Candidatus competibacter.

In this study, a novel modified nickel/H-beta (Ni/DeAl-beta) catalyst, which has active acidic sites and hydrogen binding sites, was prepared and used to produce liquefied fuel from lignin. The bifunctional Ni/DeAl-beta catalyst efficiently converted kraft lignin into liquefied fuel due to the synergistic effect of aluminum Lewis acid sites and nickel hydrogen binding sites. At a nickel content of 0.6 mmol/gzeolite, the Ni/DeAl-beta catalyst gave a high liquid product yield of 88.6% at 300 °C for 36 h. Most of the liquid product was dissolved in petroleum ether (73% of 88.6%), which was mainly composed of monomeric and dimeric degradation products. Under these conditions, the higher heating values (HHV) increased from 24.9 MJ/kg for kraft lignin to 32.0 MJ/kg for the liquid product. These results demonstrated the bifunctional Ni/DeAl-beta catalyst could be an efficient catalyst for lignin to liquefied fuel conversion.

Anaerobic digestion widely considered as a promising waste biomass disposal treatment approach, is attracting increasing interest in all corners of the globe. However, due to the specific features of different types of waste biomass, the bioenergy conversion efficiency of this process is not ideal. Another problematic aspect of anaerobic digestion is that the nutrient rich effluent sometimes needs to be treated before discharge. This review presents the recent achievements of waste biomass digestion from the perspective of energy recovery and nutrient recovery. In this work, the anaerobic treatment characteristics of common types of waste biomass are summarized and compared. With a focus of nutrient recovery and post treatment issues, the challenges and technical hurdles encountered in the anaerobic digestion of waste biomass are critically reviewed. Finally, an integrated system of anaerobic digestion, anaerobic ammonia oxidation (anammox) and phosphorus recovery is proposed for efficient energy and nutrient recovery from waste biomass.

The aim of this work was to study the effects of pretreatment process, hydrolysis condition and structural features of lignin on the improving action of surfactants (Tween 20) for enzymatic hydrolysis of pretreated wheat straw, and further to interpret the relation of these factors with the non-productive adsorption of cellulases on lignin. Tween 20 seemed to be more greatly improve cellulose conversion under harsher conditions. The surfactant showed more significant improvement for acid-pretreated substrates than oxidative-pretreated substrates. Highly-condensed lignin and phenolic hydroxyl groups showed much stronger adsorption ability to cellulases, while Tween 20 could well block the lignin–cellulase interactions recovering cellulose hydrolyzability. It was proposed that pretreatments altered lignin structures, resulting in the change of surface properties thus further impacting the lignin–cellulase interactions. Addition of Tween 20 could modify lignin surface properties to change its hydrophobicity, hydrogen bonding ability and surface charges, thus reducing the non-productive adsorption of proteins.

An electrochemical membrane-aerated biofilm reactor (EMABR) was developed for removing sulfamethoxazole (SMX) and trimethoprim (TMP) from contaminated water. The exertion of electric field greatly enhanced the degradation of SMX and TMP in the EMABR (~60%) compared to membrane-aerated biofilm reactor (MABR,10%), due to the synergistic effects of the electro-oxidation (the generation of reactive oxygen species) and biological degradation. Microbial community analyses demonstrated that the EMABR enriched the genus of Xanthobacter, which was potentially capable of degrading aromatic intermediates. Moreover, the EMABR had a lower relative abundance of antibiotic resistance genes (ARGs) (0.23) compared to the MABR (0.56), suggesting the suppression of ARGs in the EMABR. Further, the SMX and TMP degradation pathways were proposed based on the detection of key intermediate products. This study demonstrated the potential of EMABR as an effective technology for removing antibiotics from micro-polluted surface water and suppressing the development of ARGs.

In this study, an innovative approach to enhance the production of microalgal biomass and lipid as a promising sustainable feedstock for biodiesel was proposed using an actinomycetes co-culture with microalgae in the biogas digestate effluent (BDE) that can be employed as an environmentally friendly and cost-effective strategy. Among tested actinomycete isolates, Piscicocus intestinalis WA3 produced indole-3-acetic acid and siderophores as algal growth promoting agents and showed effective lipid accumulation with satisfying fatty acids composition. During co-cultivation of P. intestinalis WA3 with microalga Tetradesmus obliquus AARL G022 in the BDE, biomass production, chlorophyll a content, and lipid productivity were significantly increased by 1.30 folds, 1.39 folds, and 1.55 folds, respectively, compared to microalgae monoculture. The accumulated lipids contained long-chain fatty acids with better fuel properties that could potentially be used as biodiesel feedstock. The overall results evidenced that actinomycete co-culture would contribute greatly to the cost-effective production of environmental-friendly microbial-based biofuel.

Along with the increasing consumption of tea and its extracts, the amount of tea waste grows rapidly, which not only results in huge biomass loss, but also increases environmental stress. In past years, interest has been attracted on utilization of tea waste biomass, and a lot of work has been carried out. This review summarized the progress in conversion of tea waste by thermo-chemical and biological technologies and analyzed the property of the derived products and their performance in applications. It was found that biochar derived from tea waste had relatively large surface area, porous structures, and abundant functional groups, and could be used as bio-adsorbents and catalysts and electrochemical energy storage, while the cost of its largescale production should be evaluated. Profoundly, biological conversion, including ensiling and composting, was suggested to be an effective way to develop the tea waste biomass in practice due to its low-cost and specific functions.

Electric field-assisted aerobic composting (EAC) has been considered as a novel and effective process for enhancing compost maturation. However, the poor conductivity of compost piles affects the efficiency and applicability of EAC. Thus, this study aims to examine how conductive biochar affects compost maturation in biochar-added electric field-assisted aerobic composting (b-EAC). Our results demonstrated that the germination index and humus index significantly increased, and the compost maturation time was shortened by nearly 25% during b-EAC compared to EAC. The total oxygen utilization rate and total relative abundance of electroactive bacteria during b-EAC increased by approximately two and three times those in EAC, respectively. These findings indicated that the addition of conductive biochar has a synergistic effect which facilitated oxygen utilization by reducing resistance and accelerating electron transfer. Therefore, the addition of conductive biochar is proved to be an effective and applicable strategy for optimizing the efficiency of EAC.

The synergistic effect of the cotton stalk (CS) and the high-ash coal (HAC) on the gas production in the co-pyrolysis/gasification processes was studied using the newly designed quartz boat in this work. The gas yield and the concentrations of main gas components were quantitatively compared between the co-pyrolysis/gasification and the individual pyrolysis/gasification. The results showed that the gas yield during the co-pyrolysis was promoted at 950℃. There was almost no interaction between CS and HAC, since the co-pyrolytic gas yield exhibited a linear relationship with CS mixing ratio of 20% to 60%. The catalytic effect of alkali metals and alkaline earth metals that existed in CS, was enhanced by the addition of steam, and the synergistic effect was reduced while gas yield was enhanced with CS blending ratio increasing during co-gasification. The results provided a method to enhance synergistic effect between biomass and coal during co-pyrolysis/gasification in this study.

In this study, Anaerobic Digestion Model No. 1 (ADM1) were modified to simulate anaerobic digestion (AD) process of microcrystalline cellulose (MCC) and five lignocellulosic substrates, with the goal of predicting the hydrolysis rates of holocellulose fractions in environments with and without lignin inhibition. After model verification, the hydrolysis rate constant of MCC, i.e., the hydrolyzability of cellulose without lignin inhibition, was 3.227 d-1, while those of the holocellulose fractions of five lignocellulosic substrates (I_khyd) were in the range of 1.270 d-1 to 3.364 d-1 (average of 2.242 d-1), which demonstrated remarkable suppression of holocellulose hydrolysis by lignin. Lignin inhibition index (LII) was proposed as an indicator to intuitively quantify and characterize the lignin inhibitory strength in a specific substrate. A series of factors with the potential to affect the LII were analyzed sequentially. This study provides an advanced understanding of the participation and behavior of lignin in the AD process.

Compost is a self-heating process for organic waste. Microbes are the main executors in composting process. However, due to low temperature in winter and low efficiency of composting, a lot of heat is lost in composting. In this study, taking-out and feed-batch composting method (TFC) can supplement nutrition and improve composting microenvironment. Compared with NC, the amount of carbohydrates, protein and fat decomposed by TFC increase by 56.8%, 237% and 122%, respectively, in the composting start-up period (0–100 h). Structure and function of microbial community have changed due to stimulation of cold-adapted consortium. In addition, this study shows that core bacteria stimulate cooperation among different bacteria in the organic components metabolism networks. Finally, based on the important role of cold-adapted consortium, the sustainable heating strategy of composting system is put forward, which converts organic wastes into released heat for daily heating and hot water preparation, leading role of cold-adapted consortium.

Composting is a major way to process green waste (GW), and amendments are important in GW composting. In this study of the two-stage co-composting of GW, beer lees (0, 25, 30%) and/or ceramsite (0, 10, 15%) were assessed as amendments. Changes in bulk density, porosity, temperature, pH, gaseous emissions, dissolved organic carbon (DOC) and nitrogen (DON), lignocellulose degradation, microbial abundances, and phytotoxicity were assessed during GW composting with the amendments. Treatments with a combination of beer lees and ceramsite had positive effects, and 25% beer lees and 15% ceramsite optimized all compost parameters. The optimal combination of amendments extended the thermophilic phase, enhanced the lignocellulose decomposition, and generated a stable and mature product in 20 days. Consequently, the best final compost was not phytotoxic (germination index: 164%), was mature (void space ratio: 48.48, pH: 7.20, and DOC/DON ratio: 0.51), and nutrient-rich (especially for N: 5.13%, P: 1.84%, and K: 0.68%).

The use of low-cost feedstock for enzyme production is an environmental and economic solution. Sugarcane bagasse and soybean meal are employed in this study for optimised xylanase production with the concomitant synthesis of proteases. The enzymatic complex is produced by submerged fermentation by Aspergillus niger. Optimisation steps lead to a 2.16-fold increase in enzymatic activity. The fermentation kinetics are studied in Erlenmeyer flasks, a stirred tank reactor and a bubble column reactor, with the xylanase activities reaching 52.9; 33.7 and 60.5 U.mL−1, respectively. The protease production profile is also better in the bubble column reactor, exceeding 7 U.mL−1. The enzyme complex is then evaluated for the synthesis of xylooligosaccharides from sugarcane extracted xylan with a production of 3.1 g.L−1 where xylotriose is the main product. Excellent perspectives are observed for the developed process with potential applications in the animal feed, prebiotics and paper industries.

Short-term composting of raw materials for preparing oyster mushroom cultivation media is widely used in China, and its microbial mechanism needs to be further studied. 11-days' peach sawdust-based composting was performed to evaluate material conversion and microbial succession using physicochemical analysis and 16S rRNA and ITS sequencing. Composting bacteria demonstrated much higher abundance than fungi. Firmicutes, Actinobacteriota, and Proteobacteria were the dominant bacterial phyla, while most of fungal species belonged to Ascomycota. Moisture was the key factor at the beginning, while total nitrogen, temperature, and lignin became main influencing factors for composting maturity. Actinobacteriota, Firmicutes, and Proteobacteria of bacterial phyla, Eurotiomycetes and Sordariomycetes of fungal classes involved in lignocellulosic degradation. Bacterial function prediction analysis showed that carbohydrate metabolism and amino acid metabolism were the main metabolic pathways. These results confer a better understanding of material and microbial succession during short-term composting and also provide valuable utilization in mushroom industry.

In order to increase the utilization of coal slime, realize efficient utilization of resources and protect the environment, the feasibility of anaerobic fermentation technology employing coal slime was explored. The biodegradation of coal slimes and its influence on the utilization characteristics were analyzed using biogas production simulations, drying dehydration and thermogravimetric (TG) analysis. The results showed that the organic matter in various coal slimes could be converted to biomethane. In addition, the main methanogenic pathway was the reduction of CO2. Moreover, lower the metamorphic degree of coal slimes and higher the ash content, more conducive were they to the dehydration of coal slimes. After biodegradation, the temperatures of four coal slimes during the stages of release of moisture, volatile combustion, residual coke combustion and burnout advanced to varying degrees. Moreover, the combustion performance improved. The research results provided a novel idea for the efficient utilization of coal slime.