Search

A sequential polydepsipeptide, Boc-(Leu-Leu-Lac)3-Leu-Leu-OEt (1) (Lac = L-lactic acid residue) has been synthesized by the segment condensation method. The sequential unit of 1, -Leu-Leu-Lac-, is consisted of two amino acid residues and one hydroxy acid residue. X-ray diffraction measurement with an imaging plate detector and a direct-methods procedure of Shake-and-Bake successfully revealed the crystal structure of 1. In the solid state, the 11-mer depsipeptide, 1, have clear alpha-helical conformation even with the three ester linkages.

The depsipeptides Boc-Leu-Lac-OEt (1) and Boc-(Leu-Leu-Lac)(n)-OEt (n = 1, 2) (2 and 3, respectively) (Boc = tert-butyloxycarbonyl, Lac = L-lactic acid residue) has been synthesized and studied by crystallographic, CD spectroscopic, and ESI-MS analyses. In the packing cells, those three compounds adopt beta-strand conformations. Each molecule is linked into a dimer (1) or an infinite assembly (2 and 3) by tight hydrogen bonds of the type NH...O==C. Interestingly, the hexamer, 3 shows the first example of antiparallel pleated beta-sheet crystal structure for a depsipeptide molecule. In the packing cells, especially for 3, the ester groups O--C==O are perpendicularly oriented to the amide groups NH--C==O and beta-sheet planes to avoid the interaction between --O--(ester) and O==C. Therefore, when the chain length become longer, the O...O==C repulsion interaction works as a beta-sheet breaker and hence promotes an alpha-helical structure as observed for Boc-(Leu-Leu-Lac)(3)-Leu-Leu-OEt (4) (Oku et al. Biopolymers 2004, 75, 242-254) and Boc-(Leu-Leu-Lac)(n)-OEt (n = 4-6) (5-7) (Katakai et al., Biopolymers 1996, 38, 285-290), in which the O...O==C repulsion does not cause significant structural changes in alpha-helical main chains. Therefore from the structural and spectroscopic analyses, we have found governing factors for the specificity in the beta-sheet and alpha-helix decision in this series of depsipeptides, -(Leu-Leu-Lac)(n)-.

The depsipeptide Boc(1)-Leu(2)-Leu(3)-Ala(4)-Leu(5)-Leu(6)-Lac(7)-Leu(8)-Leu(9)-Lac(10)-Leu(11)-Leu(12)-Lac(13)-Leu(14)-Leu(15)-OEt(16) (1) (Boc = tert-butyloxycarbonyl, Lac = L-lactic acid residue) has been synthesized from the peptide Boc-Leu-Leu-Ala-OEt (2) and a depsipeptide, Boc-(Leu-Leu-Lac)(3)-Leu-Leu-OEt (3). Single crystals of 1 were successfully obtained and the structure has been solved by direct methods (such as Sir2002 and Shake-and-Bake). Interestingly, 1 adopts an alpha/3(10)-conjugated helix containing a kink at the junction of peptide and depsipeptide segments, Leu3-Lac7. This is significantly different from the conformation of 3, which has a straight alpha-helical structure with standard phi and psi angles. Microcrystalline CD spectra were also studied to compare structural properties of 1 and 3. The differences between alpha/3(10)- and alpha-helices appear in these CD spectra.

Liposomes consisting of egg yolk phosphatidylcholine and hydrophobic peptides Nps- and Cl-.+H2-(Met-Met-Leu)n-OEt (n = 6-10) with various polypeptide chain lengths were prepared by the sonication method. The conformation of the peptides incorporated into the liposomes was examined by CD spectroscopy. All the peptides incorporated assumed alpha-helical conformation. Quantitative analyses of the peptides and lipids in the membranes showed that the concentration of the peptides with a positive charge at the N-terminus in the liposomes decreased markedly as the peptide chain length increased, reaching zero for the peptides over n = 8. The peptides without a positive charge were hardly incorporated into the liposomes. Infrared attenuated reflection spectroscopy of multilayered membranes containing the peptides suggests that the axis of the alpha-helical peptide rods is oriented in parallel with the molecular axis of lipids in the membranes. These results suggest that the hydrophobic peptides can be incorporated into the lipid bilayers of the liposomes in the alpha-helical conformation, the rods of which have a length comparable to the thickness of the lipid bilayers, and the N-terminal positive charge of the peptides is essential for the stable peptide incorporated into the membranes.

As an approach for elucidating the role of sequences of amino acids in protein structures, model polypeptides having the same composition but different sequences of amino acids, (L-Ala-L-Val-Gly)n and (L-Val-L-Ala-Gly)n, have been prepared by the method involving facile monomer synthesis using N-carboxy α-amino acid anhydrides and N-hydroxysuccinimide esters. The yields and the molecular weights of the polypeptides formed by polycondensation do not depend on the monomer concentrations, but on the sequences of the amino acids in the monomers. Infrared spectra in the solid state showed that (L-Ala-L-Val-Gly)n can take the α-helical conformation but (L-Val-L-Ala-Gly)n cannot. The results suggest that the conformations of polypeptides are influenced by the sequences of the amino acids in the polypeptides.

The conformation of oligopeptides with hydrophobic side chains, Nps-(L-Leu-L-Leu-L-Ala)n-OEt and Nps-(L-Met-L-Met-L-Leu)n-OEt(n = 1–6), in the solid state, obtained either by evaporation of the solvent or by precipitation with diethyl ether from a 1,1,1,3,3,3-hexafluoropropan-2-ol (HFIP) solution, has been studied with ir spectroscopy and x-ray powder-diffraction measurements. The conformation of these peptides in the HFIP solution has been studied by CD spectroscopy. Due to a strong preference of the amino acids to form an α helix, the peptides begin forming α helices at the dodecapeptide in the HFIP solution, and in the solid state by evaporation. In the solid state, with precipitation, the α-helical conformation is first observed at the octadecapeptide and the lower peptides assume a β structure. The conformational change, from the α helix to the β structure of the peptides with 12 to 15 amino acid residues, during the precipitation process, is due to a strong tendency of the amino acids to form the β-structure in rather short peptide lengths.

N-protected peptides, which are important intermediates as a carboxyl component in the fragment condensation method, have been prepared in high yields by the reaction of o-nitrophenylsulfenyl (Nps) N-carboxy α-amino acid anhydrides with unprotected peptides and amino acids in aqueous organic systems. An Nps hexapeptide ester was prepared by the fragment condensation of an Nps tripeptide with a tripeptide ester. It was demonstrated that the synthesis of unprotected peptides by the NCA method, followed by N-protection by the Nps-NCA, is a rapid and very useful method for preparing Nps peptides.

Two series of peptides containing L-phenylalanine, Nps-(L-Phe-L-Phe-Gly)n-OEt (n = 1–6) and Nps-(L-Phe-L-Leu-Gly)n-OEt (n = 1–7), were prepared by the fragment-condensation method using the tripeptide N-hydroxysuccinimide esters. Conformational characterization of these peptides in the solid state was performed by ir spectroscopy and x-ray powder diffraction measurement. The peptides Nps-(L-Phe-L-Phe-Gly)n-OEt take the β-structure, but the pentadecapeptide and higher peptides of Nps-(L-Phe-L-Leu-Gly)n-OEt form the α-helix, although the lower homologs take the β-structure.

We have measured the vibrational CD (VCD) of a series of heterooligopeptides—o-nitrophenylsulfenyl(L-Met-L-Met-L-Leu) n-OEt, n = 6,8,10,11–in the amide A, I, and II regions. These spectra are identical in shape and magnitude, within our signal to noise limits. The VCD in each band are of exactly the shape expected for a right-handed α-helix and imply that VCD of the polypeptide α-helix is relatively unaffected by chain length down to the 18-subunit level.

The reaction of NCA's with some amino acids having a nucleophilic functional group on the side chain was studied in a heterogeneous reaction medium (acetonitrile-water). Glutamic acid and aspartic acid, having a free carboxyl group on the side chain, were successfully used to synthesize oligopeptides without interactions of the γ- and β-carboxyl group with NCA's. Two products were obtained by the reaction of NCA with L-lysine, which contains a free amino group on the side chain. e-Protected lysine was used to prepare α-peptides as a nucleophile in the reaction. No racemization was observed in the synthesis of peptides by the NCA method in the heterogeneous solvent system. Oligopeptides with some polar side chains were synthesized by the NCA method.

A series of sequential oligopeptides having simple nonpolar side chains, Nps-(L-Ala-L-Leu-Gly)n- OEt has been prepared by a stepwise fragment-condensation method using Nps-L-alanyl-L-leucylglycine N-hydroxysuccinimide ester, which was prepared by the Nps-N-carboxy α-amino-acid-anhydride method. The success of the synthesis of the peptide having a high-molecular weight, such as octadecapeptide, results from the highest solubility of the tripeptide unit, L-alanyl-L-leucylglycine. The sequential polypeptide having the same tripeptide sequence was also prepared by polycondensation of the tripeptide N-hydroxy-succinimide ester.

A series of sequential oligopeptides having the sequence alternating γ-methyl L-glutamyl and L-phenylalanyl residues have been successfully prepared by a rapid method involving the reaction of o-nitrophenylsulfenyl N-carboxy α-amino acid anhydrides with amino acid and peptide esters. The sequential oligopeptides, which are interesting from a conformational aspect, were obtained in optical pure forms above 74% yields. This result demonstrates that the o-nitrophenylsulfenyl N-carboxy α-amino acid anhydride method is especially useful for easy synthesis of protected oligopeptides with o-nitrophenylsulfenyl group.

Oligopeptides were synthesized in high yields by the controlled coupling reaction of N-carboxy α-amino acid anhydrides (NCA's) with amino acid and peptide sodium salts in the heterogeneous reaction medium of acetonitrile–water which contained sodium carbonate. In this solvent, it could be considered that the reaction could occur at the interface of acetonitrile and aqueous layers, and that NCA's could be protected by the organic layer from side reactions such as hydrolysis and polymerization. The careful control of reaction conditions such as pH of the solution was not necessary when the heterogeneous mixed solvent was used. Sodium carbonate which had not been used for a reaction of this kind could be satisfactorily used for stabilizing the carbamate intermediates in the aqueous layer of the heterogeneous reaction medium.