Search

An ion-pair high performance liquid chromatographic method was developed for the simultaneous determination of p-aminosalicylic acid (PAS) and its degradation product m-aminophenol (MAP) in a newly developed multiparticular drug delivery system. Owing to the concentration differences of PAS and MAP, acetanilide and sulfanilic acid were used as internal standards, respectively. The separation was performed on a Chromolith SpeedROD RP-18e column, a new packing material consisting of monolithic rods of highly porous silica. The mobile phase composition was of 20 mm phosphate buffer, 20 mm tetrabutylammonium hydrogen sulphate and 16% (v/v) methanol adjusted to pH 6.8, at a flow-rate of 1.0 mL/min, resulting in a run-time of about 6 min. Detection was by UV at 233 nm. The method was validated and proved to be useful for stability testing of the new dosage form. Separation efficiency was compared between the new packing material Chromolith SpeedROD RP-18e and the conventional reversed-phase cartridge LiChroCART 125-4 (5 microm). A robustness test was carried out on both columns and different separation parameters (retention, resolution, run time, temperature) were determined., (Copyright 2004 John Wiley & Sons, Ltd.)

Several chemiluminescence-based reactions are applicable to the determination of various bio-pharmaceutically important analytes, and they can be applied for monitoring chemiluminescence emission using flow injection, liquid chromatographic and capillary electrophoretic analysis, as well as for the development of chemiluminescence-based sensors or in immunoassays. As in general the emission intensity is linearly proportional to the concentration of any of the reagents, the technique allows the analysis of different species involved in the light-producing reaction, amongst which are the chemiluminescent reagent, oxidants, inhibitors, cofactors, catalysts, some fluorophore, etc. The present overview illustrates some important applications of the last decade on this rather unfamiliar luminescence technique to detectional challenges in the liquid phase. The required instrumentation is limited as no external light source is needed. Also, the technique opens perspectives for increasing detection sensitivity in miniaturized flowing streams. On the other hand, several drawbacks still limit full application, eg dependence of the emission signal upon a number of environmental factors forcing the analyst to make a compromise between separating and measuring conditions, a lack of selectivity in specific cases, the critical detection of the signal at strictly defined periods, especially in the case of sharp emission vs time profiles, and the development of detection devices in capillary electrophoresis.

Making up part of the unique family of restricted access materials (RAM) the Lichrospher ADS (alkyl-diol silica) sorbents have been developed as special packing materials for precolumns used for LC-integrated sample processing of biofluids. The advantage of such phases consists of direct injection of untreated biological fluids without sample clean-up and elimination of the protein matrix together with an on-column enrichment. The plasma samples, with internal standard phenacetin added (not essential), were brought onto the precolumn (C-18 ADS, 25 micron, 25 x 4 mm i.d.) using a phosphate buffer, 0.1 M, pH 7.0. After washing with the buffer, the ADS column was backflushed with the mobile phase phosphate buffer 0. 05 M pH 7.0: acetonitrile (80:20), thus transporting the analytes onto a reversed-phase column Ecocart 125-3 HPLC cartridge with a LiChrocart 4-4 guard column, both packed with LiChrospher 5 micron 100 RP-18; after separation detection was performed in UV at 260 nm. Essential features of the method include the novel precolumn packing, the absence of sample pretreatment, a quantitave recovery, good precision and accuracy, as well as a considerable reduction of analysis time compared to conventional manual methods applied in bioavailability studies., (Copyright 1999 John Wiley & Sons, Ltd.)

Two methodologies have been proposed for a simple statistical estimation of the detection limits in microbore-HPLC and CE techniques. Due to the impossibility to measure the blank, by using the extrapolated or approximated expressions it is possible to obtain a straightforward approach of the detection limits from the study of the residuals of the calibration data set, avoiding tedious treatment of the signals. The utility of these expressions has been checked on the data from an experimental microbore HPLC system.

A rapid and convenient flow-injection method is described for the determination of Co(II). The method utilized the phenomenon that the lophine-Co(II)-H2O2 chemiluminescence (CL) reaction is enhanced in alkaline media by the addition of hydroxylammonium chloride. The calibration curve was linear over the range 2 x 10(-7) to 2 x 10(-5) M with a detection limit of 4.5 x 10(-8) M (0.9 pmol) at a signal-to-noise ratio of 2. The method was applied to the assay of cyanocobalamin in commercially available eye lotions.