Search

One of the most widely used measures of scientific impact is the number of citations. However, due to its heavy-tailed distribution, citations are fundamentally difficult to predict but can be improved. This study was aimed at investigating the factors and parts influencing the citation number of a scientific paper in the otology field. Therefore, this work proposes a new solution that utilizes machine learning and natural language processing to process English text and provides a paper citation as the predicted results. Different algorithms are implemented in this solution, such as linear regression, boosted decision tree, decision forest, and neural networks. The application of neural network regression revealed that papers’ abstracts have more influence on the citation numbers of otological articles. This new solution has been developed in visual programming using Microsoft Azure machine learning at the back end and Programming Without Coding Technology at the front end. We recommend using machine learning models to improve the abstracts of research articles to get more citations.

Objectives. To evaluate the usefulness of a novel acoustic uroflowmetry- (UFM-) based mobile application (app) voiding diary (VD) focusing on the (1) compliance and (2) correlation with a conventional paper-based VD. Materials and Methods. A total of 78 patients were included between December 2019 and June 2020, and a subsequent review of all data was performed. The analyzed data were as follows: (1) survey of convenience/satisfaction/preference comparing the two methods, (2) compliance regarding the completeness of both methods, and (3) correlation of each metric (24-hour urine volume, nocturnal urine volume, nocturnal polyuria index, total number of voids, number of daytime voids, number of nocturnal voids, and maximal bladder capacity) between the two methods. Results. The survey results of convenience, satisfaction, and preference were as follows. With regard to convenience and satisfaction area, higher scores are reported in the mobile app VD ( mean ± standard deviation (SD); convenience: 7.47 ± 2.19 [app] vs. 4.20 ± 2.49 [paper]; satisfaction: 7.36 ± 2.17 [app] vs. 5.07 ± 2.65 [paper]). The median score of the overall preference for using the mobile app instead of the paper-based VD was 9 out of 10 ( mean ± SD 7.82 ± 2.68 ). We also found a good correlation between the two methods for nocturnal urine volume ( r = 0.55 , p = 0.04 ), nocturnal polyuria index ( r = 0.66 , p = 0.23 ), total number of voids ( r = 0.9 , p = 0.02 ), number of nocturnal voids ( r = 0.83 , p = 0.02 ), and maximal bladder capacity ( r = 0.89 , p = 0.04 ). Conclusion. The acoustic UFM-based mobile app VD demonstrated favorable findings compared to the conventional paper-based VD.

Aim. To evaluate in vitro the antibacterial effect of a paper made of silver phosphate cellulose fibers (SPCF) on Staphylococcus aureus, the most common diabetic foot ulceration (DFU) pathogen when compared with other common commercial products. Methods. The antibacterial activity of SPCF samples was evaluated through time with cell counting on agar plates. SPCF samples were then compared with commercial wound care products currently in use in DFU treatments (Silvercel™, Acticoat 7, and Aquacel Ag ExtraTM) through time on agar plates (growth inhibition zones). Results. After 6 hours, there was no viable bacterial cell detected on either plate (p<0.05). There was a net growth inhibition zone for SPCF samples but no significant difference between the two silver concentrations. Compared with common commercial products, SPCF paper provides results equal to Acticoat 7 (p<0.05) and superior to Aquacel AG ExtraTM and Silvercel™ at lower silver concentrations (p<0.001). Conclusions. These results have shown the efficiency of SPCF paper to eliminate Staphylococcus aureus in these conditions. SPCF papers are effective when compared with other common commercial products and could have an industrial potential in wound care. Infected DFU could benefit from the antibacterial effectiveness of SPCF, but more relevant experimentations related to foot ulcers are needed.

Worldwide, iron deficiency is a common form of micronutrient deficiency with a high individual and societal cost. There are considerable knowledge and practice gaps in the diagnosis and treatment of iron deficiency. Bibliometric analysis examines the published body of knowledge of a subject in an objective fashion. The Web of Science Core Collection was searched to retrieve the 100 most cited papers on the topic of iron deficiency, and the key metrics of each paper were extracted. A keyword study was performed using VOSviewer 1.6.10 software, which provided a visual mapping of the network of keyword cooccurrences. The papers were published between 1964 and 2017 and were cited an average of 636 times. They were contributed by authors from 119 different countries/regions, with the largest contributing country being the United States. 29 institutions contributed at least 6 publications each, and 4 researchers authored or coauthored at least 5 papers. Keyword analysis suggests that the most cited topics could be grouped into 4 categories: (1) epidemiologic research of the global burden of iron deficiency, (2) clinical aspects of iron deficiency anemia, (3) iron metabolism, and (4) the impact of iron deficiency on children. Identification of the most impactful studies in the field of iron deficiency may be helpful to practitioners interested in improving their knowledge base. Compared to bibliometric studies performed on other topics, the medical literature of iron deficiency is mature, as evidenced by the high citation rate of the top 100 papers. Despite the high worldwide prevalence of iron deficiency, the top cited papers are dominated by a relatively small number of countries and institutions. Interestingly, however, the most cited authors in this study do not overlap with the most cited institutions.

The plate-like graphene shells (GS) produced by an original methane pyrolysis method and their derivatives graphene oxide (GO) and graphene oxide paper (GO-P) were evaluated with luminescentEscherichia colibiotests and additional bacterial-based assays which together revealed the graphene-family nanomaterials’ toxicity and bioactivity mechanisms. Bioluminescence inhibition assay, fluorescent two-component staining to evaluate cell membrane permeability, and atomic force microscopy data showed GO expressed bioactivity in aqueous suspension, whereas GS suspensions and the GO-P surface were assessed as nontoxic materials. The mechanism of toxicity of GO was shown not to be associated with oxidative stress in the targetedsoxS::luxandkatG::luxreporter cells; also, GO did not lead to significant mechanical disruption of treated bacteria with the release of intracellular DNA contents into the environment. The well-coordinated time- and dose-dependent surface charge neutralization and transport and energetic disorders in theEscherichia colicells suggest direct membrane interaction, internalization, and perturbation (i.e., “membrane stress”) as a clue to graphene oxide’s mechanism of toxicity.

The paper mulberry (Broussonetia papyrifera) leaf is rich in alkaloids and flavonoids, which has high medicinal and feeding value. We aimed to analyze the effects of B. papyrifera leaf extract on growth performance, antioxidant capacity, immune functions, and fecal microflora of weaned piglets. Thirty healthy, 28-day-old piglets were randomly assigned to three groups and fed with a basal diet supplemented with 0, 150, and 300 g/t B. papyrifera leaf extract for 42 days (control group, group I, and group II) separately. The result revealed that the final weight of piglets in group II was higher than the other groups, and the diarrhea rate in this group was 62.9% lower than in the control group. The feed conversion ratio in group I was significantly lower than the other two groups. Higher blood urine nitrogen concentration was noted in group II, higher glutathione peroxidase and catalase in group II, higher superoxide dismutase in the control group, and higher immune globulins (Ig) IgG, IgA, and IgM in group II. There was no significant difference in community richness and community diversity among the three groups of fecal samples. The relative level of Roseburia was higher in groups I and II, while Lactobacillus was higher in the control group. In conclusion, supplementation with B. papyrifera leaf extract at a certain dosage can increase growth performance and antioxidant capacity of weaned piglets, reduce the occurrence of diarrhea, enhance immune functions and disease resistance, and affect the composition of fecal microflora.

The plate-like graphene shells (GS) produced by an original methane pyrolysis method and their derivatives graphene oxide (GO) and graphene oxide paper (GO-P) were evaluated with luminescent Escherichia coli biotests and additional bacterial-based assays which together revealed the graphene-family nanomaterials' toxicity and bioactivity mechanisms. Bioluminescence inhibition assay, fluorescent two-component staining to evaluate cell membrane permeability, and atomic force microscopy data showed GO expressed bioactivity in aqueous suspension, whereas GS suspensions and the GO-P surface were assessed as nontoxic materials. The mechanism of toxicity of GO was shown not to be associated with oxidative stress in the targeted soxS::lux and katG::lux reporter cells; also, GO did not lead to significant mechanical disruption of treated bacteria with the release of intracellular DNA contents into the environment. The well-coordinated time- and dose-dependent surface charge neutralization and transport and energetic disorders in the Escherichia coli cells suggest direct membrane interaction, internalization, and perturbation (i.e., "membrane stress") as a clue to graphene oxide's mechanism of toxicity.

Citation classics represent the highest impact work in a given field. We aim to identify and analyze the most frequently cited papers on brucellosis. We used the databases Scopus and Web of Science to determine the most frequently cited papers. The most cited fifty papers in each database were identified. We then ranked the papers according to the highest citation count recorded from any of the two databases. The most frequently cited paper received 964 citations and was by DelVecchio VG et al. reporting the complete genomic sequencing ofBrucella melitensis. The papers were published in 30 journals led by the “Infection and Immunity” journal and the “Veterinary Microbiology” journal (each had 7 papers). Citation classics in brucellosis were all in English except one in French and were mostly of basic science type. In addition, we noticed that 12 articles that were identified among the highest fifty articles in one database were missed by the other database and vice versa. Therefore, we suggest that searching in more than one database would detect additional citation classics.

Mass production of vermicompost using suitable species of earthworms and selecting target organic waste materials has appeared to be a great development in the realm of biotechnological research for the sustainable eco-management. Although, for the bioconversion of organic wastes to vermicompost, suitable earthworm species play major roles, a hoard of bacterial assemblages by virtue of production of different enzymes facilitate the process of vermicomposting. The present study has documented the roles of vermicompost associated bacteria in combating, preventing, and controlling of cancer so as to open a new vista not only in the field of vermitechnology but also on biomedical research. Earthworms’ associated bacterial metabolic products having their unique physicochemical excellence have gained importance due to their roles as a facilitator of apoptosis (programed cell death in a MCF-7 cell line). The antioxidant and anticancer activities of ethyl acetate extracts’ of vermicompost associated bacteriumBacillus anthraciswere undertaken by antioxidant assay which revealed maximum DPPH radical scavenging effect (75.79 ± 5.41%) of the extracts’ at 9 00 μg ml-1. Furthermore, the crude extracts obtained from the same bacteria were found to decrease the activity of SOD (superoxide dismutase) with the increase in doses. MTT assay showed potent cytotoxic activity against human breast adenocarcinoma cells (MCF-7) with the IC50 value of 46.64 ± 0.79 μg ml-1. It was further confirmed through Hoechst 33258 staining of nuclear fragmentation assay and DNA fragmentation analysis. Western blotting test has confirmed a downregulation of Akt upon application of crude extracts. Increase of SOD activity along with decrease of Akt level reflects that the mode of action is entirely PI-3K dependent. This study tends to indicate thatB.anthracisisolated from vermicompost could be potentially explored for the development of new therapeutic agents, especially against cancer.

High-yield pulps (HYPs), such as CTMP (chemi-thermo-mechanical pulp), are attractive due to their low cost and high wood utilization. However, their drawback of rapid brightness reversion (yellowing) limits wide use of the HYPs. In this study, a fungus, Fusarium concolor X4, was applied to treat poplar CTMP for exploring the effects of biotreatment on brightness and light-induced yellowing of the pulp. The results indicated that the biotreatment with Fusarium concolor X4 could improve the brightness of poplar CTMP and inhibit light-induced yellowing of the pulp. The yellowing inhibition mechanism was explored by the analysis of enzyme production regularity during biotreatment, changes in chemical components, and the UV-Vis absorption spectra and FTIR-ATR spectra of pulps before and after biotreatment.

Objective. To monitor the number of bacterial colonies in the air of computed tomography (CT) room for COVID-19 using different disinfection methods and to identify the most effective method for disinfection and protection of equipment. Methods. Three methods for disinfection using ultraviolet germicidal irradiation (group A), plasma circulation air sterilizer (group B), and ultraviolet germicidal irradiation plus plasma circulation air sterilizer (group C) were utilized to sanitize the air in the CT room dedicated to COVID-19 cases. Single-factor ANOVA was used to evaluate and compare the disinfection effect of the three air disinfection methods; an air microbial sampler was used to sample and measure the number of bacteria in the air of the machine room. Results. The number of bacteria in the air immediately after disinfection was significantly lower than before disinfection ( p < 0.01 ). All three disinfection methods met the disinfection requirement. No significant differences in the number of air bacteria in the machine room immediately after disinfection were observed among the three methods ( p > 0.05 ). In addition, the effect of disinfection after 2 h was compared, and the number of bacteria in group C after 2 h was significantly lower than that in group A and group B. Conclusions. All three disinfection methods have significant disinfection effects. In addition, using ultraviolet disinfection lamps combined with a plasma air disinfection machine to sterilize the air in CT machine room has the best disinfection effect for the longest duration. Therefore, we recommend the combined disinfection method (ultraviolet disinfection lamps plus plasma air disinfection), as well as formulating relevant disinfection management norms, which should thus be the method to use during pandemics.

On March 11th, 2020, the World Health Organization declared COVID-19 infection as a pandemic. Since it is a novel virus, there are basically no proven drugs or therapies; although many laboratories in different countries are working to develop a vaccine, it will take time to make it available. Passive immunization is the therapy born from the intuition of Behring and Kisato in the late 19th century. It was widely used for the treatment of bacterial infections until the discovery of antibiotics, as well as during the viral pandemics of the 20th century and of the beginning of the 21st; it still has clinical applications (e.g., tetanus prevention). This paper summarizes the basic principles of passive immunization, with particular reference to convalescent plasma. The literature concerning its use during past epidemics and the results of the first clinical studies concerning its use during the current pandemic are discussed too. A large section is dedicated to the analysis of the possible, although rare, side effects. Recently, in 2017, the WHO Blood Regulators Network (BRN) published a position paper, recommending convalescent plasma as the first-choice treatment to be tested in the absence of authorized drugs; however, this strategy has not been followed. In the current epidemic, the principle of passive immunization through convalescent plasma has been applied in several circumstances and particularly in patients with serious complications. The first reported results are encouraging and confirm the effectiveness of plasma therapy and its safety. Also, the FDA has proposed plasma treatment in order to face the increasingly complex situation and manage patients with serious or immediately life-threatening COVID-19 disease. Several studies and clinical programs are still ongoing.

Constructed wetland (CW) with monoculture of Arundo donax L. was investigated for the posttreatment of anaerobic bioreactor (ABR) treating combined industrial wastewater. Different dilutions of combined industrial wastewater (20, 40, 60, and 80) and original wastewater were fed into the ABR and then posttreated by the laboratory scale CW. The respective removal efficiencies of COD, BOD, TSS, nitrates, and ammonia were 80%, 78-82%, 91.7%, 88-92%, and 100% for original industrial wastewater treated in ABR. ABR was efficient in the removal of Ni, Pb, and Cd with removal efficiencies in the order of Cd (2.7%)Ni (79%)Pb (85%). Posttreatment of the ABR treated effluent was carried out in lab scale CW containing A. donax L. CW was effective in the removal of COD and various heavy metals present in ABR effluents. The posttreatment in CW resulted in reducing the metal concentrations to 1.95 mg/L, 0 mg/L, and 0.004 mg/L for Ni, Pb, and Cd which were within the permissible water quality standards for industrial effluents. The treatment strategy was effective and sustainable for the treatment of combined industrial wastewater.

The interest in utilizing algae for wastewater treatment has been increased due to many advantages. Algae-wastewater treatment system offers a cost-efficient and environmentally friendly alternative to conventional treatment processes such as electrocoagulation and flocculation. In this biosystem, algae can assimilate nutrients in the wastewater for their growth and simultaneously capture the carbon dioxide from the atmosphere during photosynthesis resulting in a decrease in the greenhouse gaseousness. Furthermore, the algal biomass obtained from the treatment process could be further converted to produce high value-added products. However, the recovery of free suspended algae from the treated effluent is one of the most important challenges during the treatment process as the current methods such as centrifugation and filtration are faced with the high cost. Immobilization of algae is a suitable approach to overcome the harvesting issue. However, there are some drawbacks with the common immobilization carriers such as alginate and polyacrylamide related to low stability and toxicity, respectively. Hence, it is necessary to apply a new carrier without the mentioned problems. One of the carriers that can be a suitable candidate for the immobilization is zeolite. To date, various types of zeolite have been used for the immobilization of cells of bacteria and yeast. If there is any possibility to apply them for the immobilization of algae, it needs to be considered in further studies. This article reviews cell immobilization technique, biomass immobilization onto zeolites, and algal immobilization with their applications. Furthermore, the potential application of zeolite as an ideal carrier for algal immobilization has been discussed.

Subcritical water extraction (SCW) was used to extract oil from Chlorella pyrenoidosa. The operational factors such as reaction temperature, reaction time, and biomass loading influence the oil yield during the extraction process. In this study, response surface methodology was employed to identify the desired extraction conditions for maximum oil yield. Experiments were carried out in batch reactors as per central composite design with three independent factors including reaction temperature (170, 220, 270, 320, and 370°C), reaction time (1, 5, 10, 15, and 20 min), and biomass loading (1, 3, 5, 10, and 15%). A maximum oil yield of 12.89 wt.% was obtained at 320°C and 15 min, with 3% biomass loading. Sequential model tests showed the good fit of experimental data to the second-order quadratic model. This study opens the great potential of SCW to extract algal oil for use in algal biofuel production.

Pitaya (Hylocereus genus) is a popular plant with exotic and nutritious fruit, which has widespread uses as a source of nutrients and raw materials in the pharmaceutical industry. However, the potential of pitaya peel as a natural source of bioactive compounds has not yet fully been explored. Recent advances in metabolomics have paved the way for understanding and evaluating the presence of diverse sets of metabolites in different plant parts. This study is aimed at exploring the diversity of primary and secondary metabolites in two commercial varieties of pitaya, i.e., green pitaya (Hylocereus undatus) and red pitaya (Hylocereus polyrhizus). A total of 433 metabolites were identified using a widely targeted metabolomic approach and classified into nine known diverse classes of metabolites, including flavonoids, amino acids and its derivatives, alkaloids, tannins, phenolic acids, organic acids, nucleotides and derivatives, lipids, and lignans. Red pitaya peel and pulp showed relatively high accumulation of metabolites viz. alkaloids, amino acids and its derivatives, and lipids. Differential metabolite landscape of pitaya fruit indicated the presence of key bioactive compounds, i.e., L-tyrosine, L-valine, DL-norvaline, tryptophan, γ-linolenic acid, and isorhamnetin 3-O-neohesperidoside. The findings in this study provide new insight into the broad spectrum of bioactive compounds of red and green pitaya, emphasizing the valorization of the biowaste pitaya peel as raw material for the pharmaceutical and food industries.

The release of wastewater from textile dyeing industrial sectors is a huge concern with regard to pollution as the treatment of these waters is truly a challenging process. Hence, this study investigates the triazo bond Direct Blue 71 (DB71) dye decolorization and degradation dye by a mixed bacterial culture in the deficiency source of carbon and nitrogen. The metagenomics analysis found that the microbial community consists of a major bacterial group of Acinetobacter (30%), Comamonas (11%), Aeromonadaceae (10%), Pseudomonas (10%), Flavobacterium (8%), Porphyromonadaceae (6%), and Enterobacteriaceae (4%). The richest phylum includes Proteobacteria (78.61%), followed by Bacteroidetes (14.48%) and Firmicutes (3.08%). The decolorization process optimization was effectively done by using response surface methodology (RSM) and artificial neural network (ANN). The experimental variables of dye concentration, yeast extract, and pH show a significant effect on DB71 dye decolorization percentage. Over a comparative scale, the ANN model has higher prediction and accuracy in the fitness compared to the RSM model proven by approximated R2 and AAD values. The results acquired signify an efficient decolorization of DB71 dye by a mixed bacterial culture.

An alternative low and high ammonium influent regime was proposed and adopted to keep a completely autotrophic nitrogen removal over nitrite (CANON) effective when treating low ammonium wastewater. Results show that, by cyclic operating at an alternative low and high ammonium concentration for 10 days and 28 days, the CANON system could effectively treat low ammonium wastewater. Excessive proliferation of nitrite oxidizing bacteria (NOB) under low ammonium environment was still the challenge for the stable CANON operation; but with 28 days of a high ammonium treatment combined with a sludge retention time control, the NOB overproliferated in the low ammonium operational period could be under control. Specifically, when the nitrite oxidation rate reached 8 g N/m3/h, the CANON system should enter the high ammonium influent operating mode. 16S rDNA high-throughput sequencing results show that the appropriate sludge discharging provided an environment favoring Candidatus Jettenia.

Concerns in the last few decades regarding the environmental and socioeconomic impacts of the dependence on fossil fuels have resulted in calls for more renewable and alternative energy sources. This has led to recent interest in copyrolysis of biomass and coal. Numerous reviews have been found related to individual pyrolysis of coal and biomass. This review deals mainly with the copyrolysis of coal and biomass and then compares their results with those obtained using coal and biomass pyrolysis in detail. It is controversial whether there are synergistic or additive behaviours when coal and biomass are blended during copyrolysis. In this review, the effects of reaction parameters such as feedstock types, blending ratio, heating rate, temperature, and reactor types on the occurrence of synergy are discussed. Also, the main properties of the copyrolytic products are pointed out. Some possible synergistic mechanisms are also suggested. Additionally, several outlooks based on studies in the literature are also presented in this paper.

The classic assay for a large population biomass is time-consuming, labor intensive, and chemically expensive. This paper would find out a rapid assay for predicting biomass digestibility from biomass structural features without hydrolysis. We examined the 62 representative corn stover accessions that displayed a diverse cell-wall composition and varied biomass digestibility. Correlation analysis was firstly to detect effects of cell-wall compositions and wall polymer features on corn stover digestibility. Based on the dependable relationship of structural features and digestibility, a neural networks model has been developed and successfully predicted the corn stover saccharification based on the features without enzymatic hydrolysis. The actual measured and net-simulated predicted corn stover saccharification had good results as mean square error of 1.80E-05, coefficient of determination of 0.942 and average relative deviation of 3.95. The trained networks satisfactorily predicted the saccharification results based on the features of corn stover. Predicting the corn stover saccharification without hydrolysis will reduce capital and operational costs for corn stover purchasing and storage.

Three semicontinuous continuous stirred-tank reactors (CSTR) operating at mesophilic conditions (35°C) were used to investigate the effect of hydraulic retention time (HRT) on anaerobic digestion of wheat straw. The results showed that the average biogas production with HRT of 20, 40, and 60 days was 46.8, 79.9, and 89.1 mL/g total solid as well as 55.2, 94.3, and 105.2 mL/g volatile solids, respectively. The methane content with HRT of 20 days, from 14.2% to 28.5%, was the lowest among the three reactors. The pH values with HRT of 40 and 60 days were in the acceptable range compared to that with HRT of 20 days. The propionate was dominant in the reactor with HRT of 20 days, inhibiting the activities of methanogens and causing the lower methane content in biogas. The degradation of cellulose, hemicellulose, and crystalline cellulose based on XRD was also strongly influenced by HRTs.

A modified single sequencing batch reactor (SBR) was developed to remove the nitrogen of the real landfill leachate in this study. To take the full advantage of the SBR, stir phase was added before and after aeration, respectively. The new mechanism in this experiment could improve the removal of nitrogen efficiently by the utilization of carbon source in the raw leachate. This experiment adopts the SBR process to dispose of the real leachate, in which the COD and ammonia nitrogen concentrations were about 3800 mg/L and 1000 mg/L, respectively. Results showed that the removal rates of COD and total nitrogen were above 85% and 95%, respectively, and the effluent COD and total nitrogen were less than 500 mg/L and 40 mg/L under the condition of not adding any carbon source. Also, the specific nitrogen removal rate was 1.48 mgN/(h·gvss). In this process, polyhydroxyalkanoate (PHA) as a critical factor for the highly efficient nitrogen removal (>95%) was approved to be the primary carbon source in the sludge. Because most of the organic matter in raw water was used for denitrification, in the duration of this 160-day experiment, zero discharge of sludge was realized when the effluent suspended solids were 30–50 mg/L.

Vinasse, a residue from bioethanol production containing high organic matter concentration, was used as substrate in submerged fermentation ofPseudomonas aeruginosaPA1 for biosurfactant production. About 2.7 g/L of rhamnolipids was obtained, with surface tension of 29.2 mN/m and critical micelle concentration of 80.3 mg/L. After separation of rhamnolipid and biomass, residual fermentation media were submitted to anaerobic biodegradation in mesophilic conditions. The residual medium derived from fermentation with vinasse diluted to 1 : 1, without addition of nitrogen, C : N 21, and for 168 h, led to 63.2% chemical oxygen demand (COD) removal and 97.6 mL CH4/gCODremoved. Compared to results obtained with fresh vinasse (73.7% COD removal and 112.4 mL CH4/gCODremoved), it could be concluded that both processes can be integrated in order to add value to the residue and obtain energy, reducing production costs and at the same time environmental impacts related to vinasse disposal.

Disintegration of municipal waste activated sludge (WAS) using thermo-alkaline (TA) and electro-Fenton (EF) methods was investigated and compared in terms of the efficiency of sludge solubilisation and enhancement of anaerobic biodegradability. Performance of organic matter solubilisation (soluble COD, proteins, polysaccharides) of sludge pretreated with EF was proved to be better than that with TA pretreatment, which resulted in the enhancement of anaerobic biodegradability. Comparison of results indicated that percentages of PN and PS release obtained after EF pretreatment (68.95 and 65.22%) were higher than those obtained by TA method (45.25 and 35.22%) respectively. An improvement of biogas potential about 2 and 1.6 times was achieved respectively by EF and TA pretreatment in comparison to raw sludge. During semi-continuous fermentation study in continuous stirred tank reactor, EF pretreated sludge gave the best biogas yield (0.6 L biogas/g COD) at an OLR of 2.5 g COD/L. d in comparison to TA pretreated sludge (0.3 L biogas/g COD), where low biogas yield about 0.1 L biogas/g COD was registered by raw sludge in the same CSTR. Therefore, the integration of EF process to anaerobic digestion might be a promising process for sludge reduction and biogas recovery.

To enhance the codigestion of degradation and improve biomethane production potential, sugarcane bagasse and filter mud were pretreated by sodium hydroxide NaOH 1 N at 100°C for 15, 30, and 45 minutes, respectively. Biomethane generation from 1-liter batch reactor was studied at mesophilic temperature (37±1)°C, solid concentrations of 6%, and five levels of mixing proportion with and without pretreatment. The results demonstrate that codigestion of filter mud with bagasse produces more biomethane than fermentation of filter mud as single substrate; even codigested substrate composition presented a better balance of nutrients (C/N ratio of 24.70) when codigestion ratio between filter mud and bagasse was 25 : 75 in comparison to filter mud as single substrate (C/N ratio 9.68). All the pretreatments tested led to solubilization of the organic matter, with a maximum lignin reduction of 86.27% and cumulative yield of biomethane (195.8 mL·gVS-1, digestion of pretreated bagasse as single substrate) obtained after 45 minutes of cooking by NaOH 1 N at 100°C. Under this pretreatment condition, significant increase in cumulative methane yield was observed (126.2 mL·gVS-1) at codigestion ratio of 25 : 75 between filter mud and bagasse by increase of 81.20% from untreated composition.

The performance of a laboratory scale upflow anaerobic sludge blanket (UASB) reactor and its posttreatment unit of sand-chemically carbonized rubber wood sawdust (CCRWSD) column system for the treatment of a metal contaminated municipal wastewater was investigated. Copper ion contaminated municipal wastewater was introduced to a laboratory scale UASB reactor and the effluent from UASB reactor was then followed by treatment with sand-CCRWSD column system. The laboratory scale UASB reactor and column system were observed for a period of 121 days. After the posttreatment column the average removal of monitoring parameters such as copper ion concentration (91.37%), biochemical oxygen demand (BODT) (93.98%), chemical oxygen demand (COD) (95.59%), total suspended solid (TSS) (95.98%), ammonia (80.68%), nitrite (79.71%), nitrate (71.16%), phosphorous (44.77%), total coliform (TC) (99.9%), and fecal coliform (FC) (99.9%) was measured. The characterization of the chemically carbonized rubber wood sawdust was done by scanning electron microscope (SEM), X-ray fluorescence spectrum (XRF), and Fourier transforms infrared spectroscopy (FTIR). Overall the system was found to be an efficient and economical process for the treatment of copper contaminated municipal wastewater.

The anaerobic batch test (45 days at 37°C) was performed to describe the effect of thermal pretreatment at moderate temperatures (60, 80, and 100°C) over durations of 10 and 20 minutes on the enhancement of biogas production using hotel food waste from city of Jaipur, India. The results showed that the total cumulative biogas production with thermal pretreatment (100°C, 10 minutes) was 41% higher than the control. Also, this alternative gets first rank using multicriteria decision making model, VIKOR. This outcome was obtained due to the enhancement of degradation of organic compounds such as protein and volatile solids that occurred in the linear trend. Modified Gompertz and Logistic models were used to study the effect of different pretreatment parameters on lag time and biogas yield. Scanning electron microscopy and Fourier transform infrared spectroscopy were also employed to investigate the effect of thermal pretreatment on the physiochemical properties of food waste.

The start-up and performance of the completely autotrophic nitrogen removal via nitrite (CANON) process were examined in a sequencing batch reactor (SBR) with intermittent aeration. Initially, partial nitrification was established, and then the DO concentration was lowered further, surplus water in the SBR with high nitrite was replaced with tap water, and continuous aeration mode was turned into intermittent aeration mode, while the removal of total nitrogen was still weak. However, the total nitrogen (TN) removal efficiency and nitrogen removal loading reached 83.07% and 0.422 kgN/(m3·d), respectively, 14 days after inoculating 0.15 g of CANON biofilm biomass into the SBR. The aggregates formed in SBR were the mixture of activated sludge and granular sludge; the volume ratio of floc and granular sludge was 7 : 3. DNA analysis showed that Planctomycetes-like anammox bacteria and Nitrosomonas-like aerobic ammonium oxidization bacteria were dominant bacteria in the reactor. The influence of aeration strategies on CANON process was investigated using batch tests. The result showed that the strategy of alternating aeration (1 h) and nonaeration (1 h) was optimum, which can obtain almost the same TN removal efficiency as continuous aeration while reducing the energy consumption, inhibiting the activity of NOB, and enhancing the activity of AAOB.

Discharge of high NH4-N containing wastewater into water bodies has become a critical and serious issue due to its negative impact on water and environmental quality. In this research, the performance of three different reactors was assessed and compared with regard to the removal of NH4-N from wastewater. The highest nitrogen removal efficiency of 98.3% was found when the entrapped sludge reactor (ESR), in which the sludge was entrapped in polyethylene glycol polymer, was used. Under intermittent aeration, nitrification and denitrification occurred simultaneously in the aerobic and anaerobic periods. Moreover, internal carbon was consumed efficiently for denitrification. On the other hand, internal carbon consumption was not found to occur in the suspended sludge reactor (SSR) and the mixed sludge reactor (MSR) and this resulted in nitrogen removal efficiencies of SSR and MSR being 64.7 and 45.1%, respectively. Nitrification and denitrification were the main nitrogen removal processes in the aerobic and anaerobic periods, respectively. However, due to the absence of sufficient organic carbon, denitrification was uncompleted resulting in high NO3-N contents in the effluent.

Keratinases are proteolytic enzymes predominantly active when keratin substrates are available that attack disulfide bridges in the keratin to convert them from complex to simplified forms. Keratinases are essential in preparation of animal nutrients, protein supplements, leather manufacture, textile processing, detergent formulation, feather meal processing for feed and fertilizer, the pharmaceutical and biomedical industries, and waste management. Accordingly, it is necessary to develop a method for continuous production of keratinase from reliable sources that can be easily managed. Microbial keratinase is less expensive than conventionally produced keratinase and can be obtained from fungi, bacteria, and actinomycetes. In this overview, the expansion of information about microbial keratinases and important considerations in keratinase production are discussed.

This paper describes an optimization of planetary mill pretreatment and saccharification processes for improving biosugar production. Pitch pine (Pinus rigida) wood sawdust waste was used as biomass feedstock and the process parameters optimized in this study were the buffering media, the milling time, the enzyme quantity, and the incubation time. Glucose yields were improved when acetate buffer was used rather than citrate buffer. Initially, with each process variable tests, the optimal values were 100 minutes of milling, an enzyme concentration of 16 FPU/g-biomass, and a 12-hour enzymatic hydrolysis. Typically, interactions between these experimental conditions and their effects on glucose production were next investigated using RSM. Glucose yields from thePinus rigidawaste exceeded 80% with several of the conditions tested, demonstrating that milling can be used to obtain high levels of glucose bioconversion from woody biomass for biorefinery purposes.

To study the optimum process conditions for pretreatments and anaerobic codigestion of oil refinery wastewater (ORWW) with chicken manure, L9 (34) Taguchi’s orthogonal array was applied. The biogas production (BGP), biomethane content (BMP), and chemical oxygen demand solubilization (CODS) in stabilization rate were evaluated as the process outputs. The optimum conditions were obtained by using Design Expert software (Version 7.0.0). The results indicated that the optimum conditions could be achieved with 44% ORWW, 36°C temperature, 30 min sonication, and 6% TS in the digester. The optimum BGP, BMP, and CODS removal rates by using the optimum conditions were 294.76 mL/gVS, 151.95 mL/gVS, and 70.22%, respectively, as concluded by the experimental results. In addition, the artificial neural network (ANN) technique was implemented to develop an ANN model for predicting BGP yield and BMP content. The Levenberg-Marquardt algorithm was utilized to train ANN, and the architecture of 9-19-2 for the ANN model was obtained.

The granulation of anammox sludge plays an important role in the high nitrogen removal performance of the anammox reactor. In this study, anaerobic granular sludge was selected as the seeding sludge to start up anammox reactor in order to directly obtain anammox granules. Results showed that the anammox UASB reactor was successfully started up by inoculating anaerobic granular sludge, with substrate capacity of 4435.2 mg/(L · d) and average ammonium and nitrite removal efficiency of 90.36% and 93.29%, respectively. During the start-up course, the granular sludge initially disintegrated and then reaggregated and turned red, suggesting the high anammox performance. Zn-Fe precipitation was observed on the surface of granules during the operation by SEM-EDS, which would impose inhibition to the anammox activity of the granules. Accordingly, it is suggested to relatively reduce the trace metals concentrations, of Fe and Zn in the conventional medium. The findings of this study are expected to be used for a shorter start-up and more stable operation of anammox system.

Based on low carbon wastewater as the research object and using corncob as an external solid carbon source, the performance of corncob organic matter was assessed for its release potential, quantity of release, and safety of use. The effects of varying quantities of the solid carbon source on simultaneous nitrification and denitrification were investigated in a sequencing biofilm batch reactor (SBBR). Results show that the regularity of corncob as solid carbon source material was linear, with released concentrations of heavy metals being below the Chinese national standard limit values for heavy metals according to the surface water environment quality standards (I and II) (GB3838-2002). When temperatures were within 28~31°C, the dissolved oxygen level was 4.0±0.2 mg/L and the pH conditions were within 7.5~8.0. The optimal quantity for corncob dosing was 5 g per 1.5 L of low carbon wastewater. Following treatment, the average effluent concentrations of NH4+-N and TN were 2.85 mg/L and 4.51 mg/L, respectively. The effluent concentration of NH4+-N, TN had reached the A level national standard of sewage treatment plant pollutant discharge standard (GB18918-2002).

Bioenergy is of increasing interest as a renewable, environmentally friendly alternative to energy derived from fossil fuels. Through a variety of processes, biomass can be converted to solid, liquid, or gaseous biofuels. However, various challenges persist to the maintenance and development of biomass-to-energy utilization. This special issue focuses on the most recent advances in the frontier research of bioenergy and biomass utilization and features six selected papers with high quality. The paper titled “Nanofibrillated Cellulose and Copper Nanoparticles Embedded in Polyvinyl Alcohol Films for Antimicrobial Applications” by T. Zhong et al. develops a method to produce hybrids of TEMPO nanofibrillated cellulose (TNFC) and copper nanoparticles. The hybrid material is embedded in polyvinyl alcohol thermoplastic resin and the films are produced using a solvent casting method. The authors evaluate the films in terms of its morphology and thermal and antimicrobial properties and prove that TNFC-copper nanoparticles as antimicrobial nanofillers are valuable for PVA applications. The paper titled “Response of Arbuscular Mycorrhizal Fungi to Hydrologic Gradients in the Rhizosphere of Phragmites australis (Cav.) Trin ex. Steudel Growing in the Sun Island Wetland” by L. Wang et al. assesses the variations of hydrologic gradients in the relationships among AM fungi, reed, and rhizospheric microorganisms. The authors discover water content in soil and reed growth parameters are both positively associated with AM fungi colonization, but only the positive correlations between reed biomass parameters and the colonization could be expected, or both the host plant biomass and the AM fungi could be beneficial. This study could shed light on the mechanisms inside AM fungi-reed symbioses and would be referred to for optimizing the combined phytorhizoremediation. The paper titled “Production by Tobacco Transplastomic Plants of Recombinant Fungal and Bacterial Cell-Wall Degrading Enzymes to Be Used for Cellulosic Biomass Saccharification” by L. Paolo et al. presents work on saccharification of plant biomass. The authors express in tobacco chloroplasts microbial genes encoding five cellulases and a polygalacturonase. Leaf extracts containing the recombinant enzymes show the ability to degrade various cell-wall components under different conditions. In addition, a thermostable xylanase is also tested in combination with a cellulase and a polygalacturonase to study the cumulative effect on the depolymerization of a complex plant substrate. Results demonstrate the feasibility of using transplastomic tobacco leaf extracts to convert cell-wall polysaccharides into reducing sugars, fulfilling a major prerequisite of large scale availability of a variety of cell-wall degrading enzymes for biofuel industry. The paper titled “Enzymatic Saccharification of Lignocellulosic Residues by Cellulases Obtained from Solid State Fermentation Using Trichoderma viride” by T. Sartori et al. presents an approach that uses cellulolytic complex produced by Trichoderma viride in solid state fermentation to hydrolyze lignocellulosic residues. This produced enzyme shows viability in comparison with the commercial cellulase enzyme. The synthesis of cellulases by microorganisms from lignocellulosic residues is a process of great interest, representing the search for renewable sources to replace the fossil energetic matrix. The paper titled “Improving Biomethane Production and Mass Bioconversion of Corn Stover Anaerobic Digestion by Adding NaOH Pretreatment and Trace Elements” by C. Liu et al. describes an approach to improve biomethane production from corn stover. The authors use NaOH pretreatment and trace elements supplementation as a strategy to enhance the biodegradability of corn stover for biomethane production. The approach is compared with only NaOH-pretreated and untreated corn stover, and the paper highlights the supplementation of trace elements. The paper titled “Biochemical Modulation of Lipid Pathway in Microalgae Dunaliella sp. for Biodiesel Production,” by A. F. Talebi et al., explores the use of myoinositol to modulate LP and biodiesel quality. Inclusion of myoinositol in the media indeed improves the total lipid accumulation and biodiesel quality parameters, and this work highlights the fact that the biochemical modulation strategies should be progressively considered in the hope of finding more efficient and economically feasible strategies leading to more viable production systems.

The aim of the present special issue was to explore some recent advances in environmental biotechnology and chemistry with respect to the possibility of using bioresidues as renewable feedstock in the frame of 2nd generation biorefineries. As a matter of fact, pauperization of fossil resources is favouring the development of biorefinery platforms, where goods derive from biomass processing. Because of the ethical issues related to the use of food crops for fuel production, exploitation of organic residues present in agroindustrial, forestry, zootechnical, fishery, and municipal leftovers would enhance biorefinery competitiveness and social acceptance. This approach is referred to as “2nd generation biorefinery” and is still in its infancy, with the large majority of studies being conducted at laboratory scale and very few at pilot scale. Among the major bioresidues/by-products generated by (agro)industries, lignocellulose is one of the cheapest and more abundant nonfood materials. It derives from plant biomass and it is made by 75% of polysaccharides, making carbohydrates an ideal basic platform for the generation of multiple products of societal and industrial interest. Lignin, another important compound of lignocellulosic-based biomass, may be also processed and/or extracted to increase the portfolio of such biorefineries. The present special issue majorly focuses on actual site lignocellulosic residues to produce either chemicals or fuels. Bioconversion of brewer spent grains (BSG) was described by R. Liguori, C. R. Soccol et al. using six Lactobacillus strains to generate lactic acid. Fermentation yields were compared with synthetic media also with respect to different pretreatments. Optimized cultivation reached as much as 22 g/L lactic acid. In P.-L. Tang et al. production of low molecular weight phenolic compounds was carried out using oil palm empty fruit bunch fiber (OPEFBF). While palm oil industry is rapidly expanding, an environmentally friendly solution to treat the lignocellulosic biowaste resulting from its processing is missing. P.-L. Tang et al. focused on the exploitation of lignin through enzymatic and chemical reactions following an alkaline pretreatment, which yielded a mixture of aromatic compounds such as hydroxybenzoic acid, vanillin, syringaldehyde, p-coumaric acid, and ferulic acid. V. Batori et al. reported on the generation of multiple products using whole stillage as renewable feedstock, a by-product from ethanol production from dry-mill grains. Edible fungi such as Neurospora intermedia and Aspergillus oryzae were used for the integrated bioconversion of this organic residue into ethanol and protein-enriched fungal biomass. Economic implications following the upgrade of the present industrial process with the proposed scheme are discussed. This study has close connections with the one by R. Liguori, E. Ionata et al. who exploited the biotechnological potential of fungal activity to produce sugars. Here, cellulolytic and hemicellulolytic enzymes (a mixture of cellulases and xylanases) from Pleurotus ostreatus were used to optimize the saccharification yields of Arundo donax biomass. The influences of temperature, pH, and time as operational parameters were investigated in a 33 factorial experimental design to find out the most critical ones. Significance of these experimental findings was described with respect to commercial enzymes. Finally, C. Nitsos et al. evaluated a number of methods to improve methane yields production by anaerobic digestion of three Mediterranean bioresidues. Pretreatment protocols applied hydrothermal, dilute acid, and steam explosion treatment to gain more energy from lignocellulosic residues such as olive tree pruning, grapevine pruning, and almond shells. Implementation of enzymatic hydrolysis was also tested for the lowest efficient treatments. We believe that this collection of papers will be useful to people working in the area of green chemistry and biotechnology and will help to turn an environmental issue as waste disposal into a new opportunity for a sustainable biobased economy. Alberto Scoma Lorenzo Bertin Maria A. M. Reis Michael Kornaros Marta Coma

The quick recovery process of contaminants removal of aerobic granular sludge (AGS) is complex, and the influencing factors are still not clear. The effects of dissolved oxygen (DO, air intensive aeration rate), organic loading rate (OLR), and C/N on contaminants removal characteristics of AGS and subsequently long-term operation of AGS bioreactor were investigated in this study. DO had a major impact on the recovery of AGS. The granules reactivated at air intensive aeration rate of 100 L/h achieved better settling property and contaminants removal efficiency. Moreover, protein content in extracellular polymeric substance (EPS) was almost unchanged, which demonstrated that an aeration rate of 100 L/h was more suitable for maintaining the biomass and the structure of AGS. Higher OLR caused polysaccharides content increase in EPS, and unstable C/N resulted in the overgrowth of filamentous bacteria, which presented worse NH4+-N and PO43−-P removal. Correspondingly, quick recovery of contaminants removal was accomplished in 12 days at the optimized operation conditions of aeration rate 100 L/h, OLR 4 g/L·d, and C/N 100 : 10, with COD, NH4+-N, and PO43−-P removal efficiencies of 87.2%, 86.9%, and 86.5%, respectively. The renovation of AGS could be successfully utilized as the seed sludge for the rapid start-up of AGS bioreactor.

Constructed wetland (CW) with monoculture ofArundo donaxL. was investigated for the posttreatment of anaerobic bioreactor (ABR) treating combined industrial wastewater. Different dilutions of combined industrial wastewater (20, 40, 60, and 80) and original wastewater were fed into the ABR and then posttreated by the laboratory scale CW. The respective removal efficiencies of COD, BOD, TSS, nitrates, and ammonia were 80%, 78–82%, 91.7%, 88–92%, and 100% for original industrial wastewater treated in ABR. ABR was efficient in the removal of Ni, Pb, and Cd with removal efficiencies in the order of Cd (2.7%) > Ni (79%) > Pb (85%). Posttreatment of the ABR treated effluent was carried out in lab scale CW containingA. donaxL. CW was effective in the removal of COD and various heavy metals present in ABR effluents. The posttreatment in CW resulted in reducing the metal concentrations to 1.95 mg/L, 0 mg/L, and 0.004 mg/L for Ni, Pb, and Cd which were within the permissible water quality standards for industrial effluents. The treatment strategy was effective and sustainable for the treatment of combined industrial wastewater.

From discovery in the early 1990s to completion of full-scale anammox reactor, it took almost two decades to uncover the secret veil of anammox bacteria. There were three milestones during the commercialization of anammox: the development of the first enrichment culture medium, the completion of the first commercial anammox reactor, and the fast start-up of full-scale anammox plant. Till now, the culture of anammox bacteria experienced a big progress through two general strategies: (a) to start up a reactor from scratch and (b) to seed the reactor with enriched anammox sludge. The first full-scale anammox reactor took 3.5 years to realize full operation using the first approach due to several reasons besides the lack of anammox sludge. On the other hand, the first Asian anammox reactor started up in two months, thanks to the availability of anammox seed. Along with the implementation of anammox plants, anammox eventually becomes the priority choice for ammonium wastewater treatment.

Studies on the occurrence of pharmaceuticals show that the widely used pharmaceuticals ibuprofen and diclofenac are present in relevant concentrations in the environment. A pilot plant treating hospital wastewater with relevant concentrations of these pharmaceuticals was evaluated for its performance to reduce the concentration of the pharmaceuticals. Ibuprofen was completely removed, whereas diclofenac yielded a residual concentration, showing the necessity of posttreatment to remove diclofenac, for example, activated carbon. Successively, detailed laboratory experiments with activated sludge from the same wastewater treatment plant showed bioremediation potential in the treatment plant. The biological degradation pathway was studied and showed a mineralisation of ibuprofen and degradation of diclofenac. The present microbes were further studied in laboratory experiments, and DGGE analyses showed the enrichment and isolation of highly purified cultures that degraded either ibuprofen or diclofenac. This research illuminates the importance of the involved bacteria for the effectiveness of the removal of pharmaceuticals in a wastewater treatment plant. A complete removal of pharmaceuticals from wastewater will stimulate water reuse, addressing the worldwide increasing demand for clean and safe fresh water.

This paper investigates the opportunity of using almond oil as a renewable and alternative fuel source. Different fuel blends containing 10, 30, and 50% almond biodiesel (B10, B30, and B50) with diesel fuel (B0) were prepared and the influence of these blends on emissions and some performance parameters under various load conditions were inspected using a diesel engine. Measured engine performance parameters have generally shown a slight increase in exhaust gas temperature and in brake specific fuel consumption and a slight decrease in brake thermal efficiency. Gases investigated were carbon monoxide (CO) and oxides of nitrogen (NOx). Furthermore, the concentration of the total particulate and the unburned fuel emissions in the exhaust gas were tested. A blend of almond biodiesel with diesel fuel gradually reduced the engine CO and total particulate emissions compared to diesel fuel alone. This reduction increased with more almond biodiesel blended into the fuel. Finally, a slight increase in engineNOxusing blends of almond biodiesel was measured.

Sugar beet pulp, a byproduct of sugar beet processing, can be used as a feedstock in second-generation ethanol production. The objective of this study was to investigate the effects of pretreatment, of the dosage of cellulase and hemicellulase enzyme preparations used, and of aeration on the release of fermentable sugars and ethanol yield during simultaneous saccharification and fermentation (SSF) of sugar beet pulp-based worts. Pressure-thermal pretreatment was applied to sugar beet pulp suspended in 2% w/w sulphuric acid solution at a ratio providing 12% dry matter. Enzymatic hydrolysis was conducted using Viscozyme and Ultraflo Max (Novozymes) enzyme preparations (0.015–0.02 mL/g dry matter). Two yeast strains were used for fermentation: Ethanol Red (S. cerevisiae) (1 g/L) andPichia stipitis(0.5 g/L), applied sequentially. The results show that efficient simultaneous saccharification and fermentation of sugar beet pulp was achieved. A 6 h interval for enzymatic activation between the application of enzyme preparations and inoculation with Ethanol Red further improved the fermentation performance, with the highest ethanol concentration reaching26.9±1.2 g/L and86.5±2.1%fermentation efficiency relative to the theoretical yield.

This article proposes a methane production approach through sequenced anaerobic digestion of kitchen waste, determines the hydrolysis constants and reaction orders at both low total solid (TS) concentrations and high TS concentrations using the initial rate method, and examines the population growth model and first-order hydrolysis model. The findings indicate that the first-order hydrolysis model better reflects the kinetic process of gas production. During the experiment, all the influential factors of anaerobic fermentation retained their optimal values. The hydrolysis constants and reaction orders at low TS concentrations are then employed to demonstrate that the first-order gas production model can describe the kinetics of the gas production process. At low TS concentrations, the hydrolysis constants and reaction orders demonstrated opposite trends, with both stabilizing after 24 days at 0.99 and 1.1252, respectively. At high TS concentrations, the hydrolysis constants and the reaction orders stabilized at 0.98 (after 18 days) and 0.3507 (after 14 days), respectively. Given sufficient reaction time, the hydrolysis involved in anaerobic fermentation of kitchen waste can be regarded as a first-order reaction in terms of reaction kinetics. This study serves as a good reference for future studies regarding the kinetics of anaerobic digestion of kitchen waste.

In response to the energy crisis, global warming, and climate changes, microalgae have received a great deal of attention as a biofuel feedstock. Due to a high lipid content in microalgal cells, microalgae present as a promising alternative source for the production of biodiesel. Environmental and culturing condition variations can alter lipid production as well as chemical compositions of microalgae. Therefore, application of the strategies to activate lipid accumulation opens the door for lipid overproduction in microalgae. Until now, many original studies regarding the approaches for enhanced microalgal lipid production have been reported in an effort to push forward the production of microalgal biodiesel. However, the current literature demonstrates fragmented information available regarding the strategies for lipid production improvement. From the systematic point of view, the review highlights the main approaches for microalgal lipid accumulation induction to expedite the application of microalgal biodiesel as an alternative to fossil diesel for sustainable environment. Of the several strategies discussed, the one that is most commonly applied is the design of nutrient (e.g., nitrogen, phosphorus, and sulfur) starvation or limitation. Other viable approaches such as light intensity, temperature, carbon dioxide, salinity stress, and metal influence can also achieve enhanced microalgal lipid production.

Subcritical water extraction (SWE) technology has been used for the extraction of active compounds from different biomass materials with low process cost, mild operating conditions, short process times, and environmental sustainability. With the limited application of the technology to microalgal biomass, this work investigates parametrically the potential of subcritical water for high-yield extraction of biochemicals such as carbohydrates and proteins from microalgal biomass. The SWE process was optimized using central composite design (CCD) under varying process conditions of temperature (180–374°C), extraction time (1–20 min), biomass particulate size (38–250 μm), and microalgal biomass loading (5–40 wt.%).Chlorella vulgarisused in this study shows high volatile matter (83.5 wt.%) and carbon content (47.11 wt.%), giving advantage as a feedstock for biofuel production. The results showed maximum total carbohydrate content and protein yields of 14.2 g/100 g and 31.2 g/100 g, respectively, achieved under the process conditions of 277°C, 5% of microalgal biomass loading, and 5 min extraction time. Statistical analysis revealed that, of all the parameters investigated, temperature is the most critical during SWE of microalgal biomass for protein and carbohydrate production.

This research focused on the ammonium-nitrogen (NH4-N) removal from the domestic wastewater using the attached growth reactors. Two types of waste material of corncob (biodegradable material) and concrete (nonbiodegradable material) were used as the carrier for microorganisms’ attachment. During operation, both reactors achieved absolutely high performance of ammonium removal (up to 99%) and total nitrogen removal (up to 95%). The significant advantage of corncob carrier was that the corncob was able to be a source of carbon for biological denitrification, leading to no external carbon requirement for operating the system. However, the corncob caused an increasing turbidity of the effluent. On the other hand, the concrete carrier required the minimal external carbon of 3.5 C/N ratio to reach the good performance. Moreover, a longer period for microorganisms’ adaptation was found in the concrete carrier rather than the corncob carrier. Further, the same physiological and biochemical characteristics of active bacteria were found at the two carriers, which were negative gram, cocci shape, and smooth and white-turbid colony. Due to the effluent quality, the concrete was more appropriate carrier than the corncob for wastewater treatment.

The aim of this study was to assess the effects of the codigestion of food manufacturing and processing wastes (FW) with sewage sludge (SS), that is, municipal wastewater treatment plant primary sludge and waste activated sludge. Bench scale mesophilic anaerobic reactors were fed intermittently with varying ratio of SS and FW and operated at a hydraulic retention time of 20 days and organic loading of 2.0 kg TS/m3·d. The specific biogas production (SBP) increased by 25% to 50% with the addition of 1%–5% FW to SS which is significantly higher than the SBP from SS of 284±9.7 mLN/g VS added. Although the TS, VS, and tCOD removal slightly increased, the biogas yield and methane content improved significantly and no inhibitory effects were observed as indicated by the stable pH throughout the experiment. Metal screening of the digestate suggested the biosolids meet the guidelines for use as a soil conditioner. Batch biochemical methane potential tests at different ratios of SS : FW were used to determine the optimum ratio using surface model analysis. The results showed that up to 47-48% FW can be codigested with SS. Overall these results confirm that codigestion has great potential in improving the methane yield of SS.

The production of olive oil in Morocco has recently grown considerably for its economic and nutritional importance favored by the country’s climate. After the extraction of olive oil by pressing or centrifuging, the obtained liquid contains oil and vegetation water which is subsequently separated by decanting or centrifugation. Despite its treatment throughout the extraction process, this olive mill wastewater, OMW, still contains a very important oily residue, always regarded as a rejection. The separated oil from OMW can not be intended for food because of its high acidity of 3.397% which exceeds the international standard for human consumption defined by the standard of the Codex Alimentarius, proving its poor quality. This work gives value addition to what would normally be regarded as waste by the extraction of oleic acid as a high value product, using the technique of inclusion with urea for the elimination of saturated and unsaturated fatty acids through four successive crystallizations at 4°C and 20°C to have a final phase with oleic acid purity of 95.49%, as a biodegradable soap and a high quality glycerin will be produced by the reaction of saponification and transesterification.

The gasification and combustion of dry tree leaves and the cogasification of dry tree leaves soaking crude glycerol were studied experimentally. An updraft fixed bed gasification and combustion system was built. The operation was conducted at different air to fuel ratios. Results show more stable combustion and more effective heat transfer to furnace walls for the cases when tree leaves flakes are mixed with 20 percent (on mass basis) of crude glycerol, as compared with the case when only dry tree leaves are used as fuel. TGA analysis was also conducted for the two fuels used under both air and nitrogen environments. For the crude glycerol, four phases of pyrolysis and gasification were noticed under either of the two surrounding gaseous media (air or nitrogen). For the dry tree leaves, the pyrolysis under nitrogen shows only a simple smooth pyrolysis and gasification curve without showing the different distinct phases that were otherwise identified when the pyrolysis is conducted under air environment. Moreover, the air TGA results lead to more gasification due to the char oxidation at high temperatures. DTG results are also presented and discussed.

Torrefaction process of biomass material is essential in converting them into biofuel with improved calorific value and physical strength. However, the production of torrefied biomass is loose, powdery, and nonuniform. One method of upgrading this material to improve their handling and combustion properties is by densification into briquettes of higher density than the original bulk density of the material. The effects of critical parameters of briquetting process that includes the type of biomass material used for torrefaction and briquetting, densification temperature, and composition of binder for torrefied biomass are studied and characterized. Starch is used as a binder in the study. The results showed that the briquette of torrefied rubber seed kernel (RSK) is better than torrefied palm oil shell (POS) in both calorific value and compressive strength. The best quality of briquettes is yielded from torrefied RSK at the ambient temperature of briquetting process with the composition of 60% water and 5% binder. The maximum compressive load for the briquettes of torrefied RSK is 141 N and the calorific value is 16 MJ/kg. Based on the economic evaluation analysis, the return of investment (ROI) for the mass production of both RSK and POS briquettes is estimated in 2-year period and the annual profit after payback was approximately 107,428.6 USD.