Search

Abstract: The most frequently used handling method in Sweden for the extraction of forest fuels is one in which logging residues are piled in harvester heaps to dry within the clear-cutting area before stacking into larger windrows. This handling method, however, requires multiple stages and the amount of handling involved results in a significant loss of biomass that could have been used for energy. This study compares two handling methods for the extraction of logging residues in stands dominated by Norway spruce. The traditional “dried-stacked” method was compared to the “fresh-stacked” method in which logging residues are collected simultaneously during normal logging operations and stacked in windrows at or near the roadside to dry. Determination of fraction composition and moisture content was carried out on the biomass provided to the energy-converting industry shortly after comminuting the logging residues. The results show that the fresh-stacked logging residues contained a higher amount of needles (8%), compared to 4% for the dried-stacked logging residues. However, the amount of needles was considered to be low in both handling methods. Both handling methods were proven to provide adequate drying with moisture content levels at approximately 36% for fresh-stacked and 31% for dried-stacked logging residues. These results indicate that weather and forest conditions have a greater impact on the moisture content than handling method. An acceptance of fresh-stacked logging residues, preferably connected to ash recycling, would afford the energy-converting industries the opportunity to use new technologies, reduce costs and extract a greater biomass total. [Copyright &y& Elsevier]

Abstract: A yield model for willow plantations for bioenergy production in Sweden was developed based on recorded production of 2082 commercial plantations during the period 1989–2005. The model predicts yield for the first, second and third harvest using oats (avena) production as agro-climatic index. The mean annual yields were 2.6, 4.2 and 4.5 oven dry tonnes (odt) per hectare during the first, second and third cutting cycles, respectively. The yield correlated inversely with the length of the cutting cycle. The results of the study show significant differences between growers, which suggest the importance of proper management in the establishment and tending of the plantations. Model estimates for 25% of the best growers vary from 4.0 to 6.3odtha−1 yr−1 in 5-year-rotation plantations during the first cutting cycle, and from 5.4 to 7.1odtha−1 yr−1 in 4-year-rotations for the second cutting cycle. The proposed model can be applied in policy making and for management planning. [Copyright &y& Elsevier]