Search

Seaweeds are considered a viable feedstock for producing energy through the anaerobic digestion conversion process. Its exploitation and use as an alternative renewable energy source; however, remains marginal in the EU. This study aims to evaluate BMP in batch tests of the brown algae Fucus vesiculosus from the Baltic Sea and collected from the Latvian coast. The lab scale BMP tests were oriented towards the evaluation of the effects of mechanical and microwave pre-treatment methods, as well as the impact of a different algae-to-inoculum (A/I) ratio using: i) cutting blades together with mortar and pestle (C&PM) in combination with the use of a 700 W capacity microwave, ii) 1:3 and 1:5 A/I ratios. The cumulative CH 4 yields show a value in the range of 68 ± 21 mL CH 4 /g VS – a trial with no microwave treatment and A/I of 1:3) and 144 ± 28 mL CH 4 /g VS – a trial including a microwave treatment for 3 min, and A/I ratio of 1:3. The results show effectiveness in the range of 7.8%–43.7%, when the microwave pre-treatment is applied for 1.5 min, and a range of 37.2%–45.2% when the pre-treatment is applied for 3.0 min. The results of this study suggest promising potential for F. vesiculosus for biogas production, especially in the Baltic region. [ABSTRACT FROM AUTHOR]

The present study aims to quantify the main biomass resources in South Tyrol (Northern Italy) and estimate the potential contribution for the energy sector. Moreover, four representative feedstocks have been tested in a domestic pellet boiler under standard conditions in order to assess its performance and pollutant emissions. The unexploited biomass potential for energy conversion applications, expressed as dry weight, has been estimated to be 135 000 t y −1 from forest, 14 950 t y −1 for apple pruning residues and 12 000 t y −1 from the industrial sector. The scenario of utilizing the unexploited local biomass resources – in energy systems such as the ones deployed in South Tyrol – would contribute with an annual bioenergy production contribution of 130–270 TJ of electricity and 1700–2100 TJ of heat. Finally, the tested feedstocks can be used in domestic boilers, however, some modifications are required when using agricultural residues. [ABSTRACT FROM AUTHOR]

Wheat straw has a vast potential as feedstock for biofuel production in China. However, little information is available regarding variation in cell wall composition and enzymatic digestibility of wheat straw. This study investigated cell wall compositions and biomass digestibility of the straw of 115 wheat accessions from central China using a 1% NaOH pretreatment and mixed enzymatic hydrolysis. Significant variation in cell wall composition and sugar release was observed, with a coefficient variation (CV) ranging from 4.7% to 21.2%. Cellulose, hemicelluloses, alkali detergent hemicelluloses (ADH), and acid insoluble lignin (AIL) positively correlated with each other, and they all negatively correlated with acid soluble lignin (ASL). Hexose yields had a negative correlation with ADH and AIL, and positive correlation with ASL. No apparent undesirable correlation was found between sugar release and grain yield, thus yield and biomass convertibility can be potentially improved simultaneously. Furthermore, the features of the cell wall constitutions were compared with other plants and their implication in determining the best possible conversion strategy was discussed. This initial study is essential to understand the cell wall composition of wheat straw and to explore the potential of wheat straw as feedstock for biofuel production. [ABSTRACT FROM AUTHOR]

Abstract: This paper proposes and tests novel supply chain designs for bioenergy and biobased products that result in logistical costs savings of 2–38%. The proposed supply chain design reduces the costs of: (1) purchasing logistical harvesting equipment; (2) operating logistical harvesting equipment; and (3) holding feedstock inventory, by using a multitude of crop types as feedstock, instead of just one, as is common in research and practice today. In so doing, this research challenges the prevalent assumption that monocultures, despite their known environmental concerns, are preferable from a costs perspective. Simulation/optimization is used to test supply chain designs, and then to find the environmental conditions where these new supply chain designs could be most profitably implemented. [Copyright &y& Elsevier]

Abstract: Empty fruit bunch (EFB) from oil palm is one of the potential biomass to produce biofuels like bio-oil due to its abundant supply and favorable physicochemical characteristics. Confirming the assertion, this paper presents an overview of EFB as a feedstock for bio-oil production. The fundamental characteristics of EFB in terms of proximate analysis, ultimate analysis and chemical composition, as well as the recent advances in EFB conversion processes for bio-oil production like pyrolysis and solvolysis are outlined and discussed. A comparison of properties in terms of proximate analysis, ultimate analysis and fuel properties between the bio-oil from EFB and petroleum fuel oil is included. The major challenges and future prospects towards the utilization of EFB as a useful resource for bio-oil production are also addressed. [Copyright &y& Elsevier]

Abstract: This paper provides a literature review of articles on the primary forest fuel supply chain which have been published in English speaking peer-reviewed journals from 1989 to 2011. The focus is on the key issues of the transportation of primary forest fuel to heat and/or power plants: (i) transportation modes, (ii) terminal types, and (iii) forest fuel supply chain management, and provides basics on the logistically relevant characteristics of wood as feedstock such as on various feedstock assortments. The analysed supply chains include the transshipment, storage, handling (e.g. chipping) and transportation of primary forest fuel from the place of harvest to energy conversion plant. Due to spatial distribution, low mass density, low energy density and low bulk density, the transportation of primary forest fuel is crucial for economic efficiency as well as for reduced CO2 emissions. As a consequence of forests accessibility, road transportation (after hauling the biomass to the forest road) is the first step of the modern primary forest fuel supply chain. For longer transportation distances, rail or waterway is preferred because of lower transportation costs per volume transported and lower CO2 emissions. We highlight that some experience exists in multimodal transport, including truck, train or ship. Intermodal transport, however, has not been studied in the past and, therefore, an outlook for the research requirements is made here. [Copyright &y& Elsevier]

Abstract: The current study was initiated to evaluate the potential of sugar saps from nipa (Nypa fruticans) palm as sustainable feedstock for ethanol production. Nipa palms managed as plantations on four sites was chosen for this study with palms within 8–100 years of age. All palms studied were found to have the potential to produce sugar saps from 0.4 to 1.2 L d-1 per palm. Further chemical characterization of its saps gave a total composition of 159–214 g kg-1 mainly composed of sucrose, glucose and fructose. In addition, the elemental analysis gave 5 g kg-1 of inorganics with Na, K and Cl being its main inorganic elements. Preliminary batch fermentative assays using Saccharomyces cerevisiae showed that nipa saps can be converted to ethanol within 30–48 h in conditions with and without nutrient supplementation. Furthermore, the fermentation trends were similar to sugarcane sap with high ethanol conversions up to 96.9% and 95.5% achieved for both nutrient conditions. Further analysis on inorganic elements before and after fermentation showed that specific elements of Mg, Ca, P and S were significantly reduced and could have assisted the fermentation. Based on the results obtained from sap collection, chemical characterization and fermentation, the ethanol potential from nipa planted at a density of 1000 ha-1 would range from 4550–9100 L ha-1 y-1. Conclusively, nipa sap showed some interesting characteristics which makes it a potential feedstock for ethanol production. [Copyright &y& Elsevier]

Abstract: The U.S. Energy Independence and Security Act of 2007 mandates the use, if produced, of 6.06 × 1010 L of advanced biofuels by 2022. The objective of this study is to determine the ethanol price necessary for a biorefinery to breakeven when using switchgrass as the single feedstock to produce ethanol. A holistic model that encompasses acquisition of land use services, feedstock production, harvest, harvest machine investment, feedstock logistics (storage, transportation), biorefinery location and size, and biorefinery investment is constructed and used to determine breakeven ethanol price. The model was solved for each of three biomass to ethanol conversion rates (250, 334, and 417 L of ethanol Mg−1 of biomass) and each of three biorefinery investment cost estimates ($2, $4, and $6 × 108 for a biorefinery with annual capacity of 379 × 106 L). Breakeven ethanol prices ranged from $0.44 L−1 with a conversion rate of 417 L of ethanol Mg−1 and an investment cost of $2 × 108, to $0.72 L−1 with a conversion rate of 250 L Mg−1 and an investment cost of $6 × 108. Improving the efficiency of conversion from 250 to 334 L Mg−1 decreases the estimated breakeven cost by $0. 07 L−1. Improved conversion efficiency results in a reduction of the total quantity of feedstock required and in the cost to deliver feedstock. Most of the cost reduction follows from reductions in land required (rent), and biomass harvest, storage, and transportation costs. [Copyright &y& Elsevier]

Abstract: Bioenergy production involves a series of interrelated activities associated with feedstock production and feedstock-to-energy conversion. Thus, decisions on bioenergy production and deployment should be based on the simultaneous consideration of the entire supply chain. Based on cost minimization of both feedstock production and energy conversion, we develop a generic framework for determining the optimal bioenergy conversion plant size, the corresponding feedstock supply radius, and bioenergy production costs. The theoretical framework elucidates the relationships among activities along the bioenergy supply chain, suggesting strategies for enhancing the cost competitiveness of bioenergy. Such relationships as well as applications of our theoretical model are further illustrated using cases of producing electricity and cellulosic ethanol from biomass. [Copyright &y& Elsevier]

Abstract: Sunn hemp (Crotolaria juncea), is a fast growing, high biomass yielding tropical legume that may be a possible southeastern bioenergy crop. When comparing this legume to a commonly grown summer legume – cowpeas (Vigna unguiculata), sunn hemp was superior in biomass yield (kgha−1) and subsequent energy yield (GJha−1). In one year of the study after 12 weeks of growth, sunn hemp had 10.7Mgha−1 of biomass with an energy content of 19.0Mgha−1. This resulted in an energy yield of 204GJha−1. The energy content was 6% greater than that of cowpeas. Eventhough sunn hemp had a greater amount of ash, plant mineral concentrations were lower in some cases of minerals (K, Ca, Mg, S) known to reduce thermochemical conversion process efficiency. Pyrolytic degradation of both legumes revealed that sunn hemp began to degrade at higher temperatures as well as release greater amounts of volatile matter at a faster rate. [Copyright &y& Elsevier]

Abstract: Fifteen Miscanthus genotypes grown in five locations across Europe were analysed to investigate the influence of genetic and environmental factors on cell wall composition. Chemometric techniques combining near infrared reflectance spectroscopy (NIRS) and conventional chemical analyses were used to construct calibration models for determination of acid detergent lignin (ADL), acid detergent fibre (ADF), and neutral detergent fibre (NDF) from sample spectra. Results generated were subsequently converted to lignin, cellulose and hemicellulose content and used to assess the genetic and environmental variation in cell wall composition of Miscanthus and to identify genotypes which display quality traits suitable for exploitation in a range of energy conversion systems. The NIRS calibration models developed were found to predict concentrations with a good degree of accuracy based on the coefficient of determination (R 2), standard error of calibration (SEC), and standard error of cross-validation (SECV) values. Across all sites mean lignin, cellulose and hemicellulose values in the winter harvest ranged from 76–115gkg−1, 412–529gkg−1, and 235–338gkg−1 respectively. Overall, of the 15 genotypes Miscanthus x giganteus and Miscanthus sacchariflorus contained higher lignin and cellulose concentrations in the winter harvest. The degree of observed genotypic variation in cell wall composition indicates good potential for plant breeding and matching feedstocks to be optimised to different energy conversion processes. [Copyright &y& Elsevier]