Search

The cultivation of energy cane throughout the Southeastern United States may displace grazed pastures on organic soil (Histosols) to meet growing demands for biofuels. We combined results from a field experiment with a biogeochemical model to improve our understanding of how the conversion of pasture to energy cane during early crop establishment affected soil GHG (CO 2 , CH 4 , and N 2 O) exchange with the atmosphere. GHG fluxes were measured under both land uses during wet, hot and cool, dry times of year, and following a fertilization event. We also simulated the impact of changes in precipitation on GHG exchange. Higher fertilization of cane contributed to greater emission of N 2 O than pasture during warmer and wetter times of the year. The model predicted that energy cane emitted more nitrogen than pasture during simulated wetter than drier years. The modeled emission factor for N 2 O was 20 to 30-fold higher than the default value from IPCC (1%), suggesting that the default IPCC value could dramatically underestimate the consequences of this land conversion on the climate system. Predicted soil CH 4 and CO 2 fluxes were higher in pasture than energy cane, and this difference was not affected by increasing precipitation. Model simulations predicted that soils under first year cane emit more GHGs than pasture, particularly during wet years, but this difference disappeared two years after energy cane establishment. Our results suggest that management practices may be important in determining soil GHG emissions from energy cane on organic soils particularly during the first year of cane establishment. [ABSTRACT FROM AUTHOR]

The use of woody biomass in thermochemical conversion is still the most popular method of obtaining bioenergy from this material. Elemental composition has a significant effect on biomass quality and parameters of the combustion process. The aim of this study was to determine the content of selected macroelements (phosphorus, potassium, magnesium, calcium, sodium and sulphur), microelements (boron, copper, iron, manganese and zinc) and trace elements (cadmium, chromium, nickel and lead) in willow biomass of two different varieties and three clones, harvested in annual, biennial and triennial cycles in north-eastern Poland. The study found significant variability between varieties/clones and harvest cycles. Biomass of the UWM 200 clone of Salix alba in triennial harvest rotation had the best parameters as a potential fuel source; it was found to contain the significantly smallest concentrations of P, K, Na, S (1.48, 5.45, 0.08, 0.35 g kg −1 DM, respectively) and Fe, Cr, Pb (208.85, 4.91, 0.83 mg kg −1 , respectively). The content of all of the elements under study decreased significantly with an extended harvest cycle, and the differences, when comparing the triennial to the annual cycle, ranged from −9% to −29% for macroelements, from −7% to −48% for microelements and from −11% to −20% for trace elements. [ABSTRACT FROM AUTHOR]

This paper makes projections of the theoretical and technical potentials of bioenergy supply for 2050. The projections consider changes in available land for bioenergy and food for the global demand and advancements in yield, productivity, expansion of bio-waste recovery, and energy conversion. We present a literature review on projections. We introduced a novel logical and transparent forecasting model. Three future scenarios were established: business as usual (BUS), optimistic trends (OPT), and full adaptation response (FAR). The projection is carried out based on four adjusting factors. An uncertainty analysis was carry-out based on a Monte-Carlo method. Projections of bioenergy production in 2050 were compared with other projections in the literature. The FAR scenario showed that it would be possible to produce twenty-one times the current primary bioenergy supply and to even supply all global primary energy demand in 2050, mostly by energy crops. The assumptions adopted for the BUS and OPT scenarios make their projections more likely. Therefore, the contribution of bioenergy in the global energy matrix is expected to be between 64 and 313 EJ (7.5%–37%) in 2050. There would be a significant change in the composition of the bioenergy supply from today's mostly firewood to energy crops and biowastes. The technical potential for fuel and electric power mostly follow the supply trends for primary bioenergy (theoretical). The potential avoided greenhouse emissions are estimated. The heuristics and the level of transparency of the novel model will allow adjustments and exploration of other scenarios as time passes. • Novel model for projections of the potential of global primary bioenergy supply. • Bioenergy supply potential is shown for 11 different groups of biomass. • Global primary bioenergy supply could increase up to 6 times by 2050 (37% of demand). • Full adaptation response scenario could meet 100% of the global energy demand. • Bioenergy can play a major role in the global energy supply. [Display omitted] [ABSTRACT FROM AUTHOR]

Literature values for glucose release from corn stover are highly variable which would likely result in tremendous variability in bio-refinery ethanol yield from corn stover feedstock. A relatively recent change in United States corn genetics is the inclusion of the Bacillus thuringiensis (Bt) trait, which now accounts for three-fourths of all US planted corn acreage. The objective of this study was to evaluate the effect of corn grain yield, inclusion of the Bt trait, and location environment on corn stover quality for subsequent ethanol conversion. Two hybrid pairs (each having a Bt and non-Bt near-isoline) were analyzed giving a total of 4 hybrids. In 2010 and 2011, field plots were located in Michigan at four latitudinal differing locations in four replicated plots at each location. Stover composition and enzymatic digestibility was analyzed and estimated ethanol yield (g g −1 ) was calculated based on hydrolyzable glucan and xylan levels. Analysis showed that there were no significant differences in total glucose or xylose levels nor in enzymatically hydrolyzable glucan and xylan concentrations between Bt corn stover and the non-Bt stover isolines. Regression analyses between corn grain yield (Mg ha −1 ) and corn stover ethanol yield (g g −1 ) showed an inverse relationship indicative of a photosynthate source-sink relationship. Nevertheless, the quantity of stover produced was found to be more critical than the quality of stover produced in maximizing potential stover ethanol yield on a land area basis. [ABSTRACT FROM AUTHOR]

Abstract: This paper proposes and tests novel supply chain designs for bioenergy and biobased products that result in logistical costs savings of 2–38%. The proposed supply chain design reduces the costs of: (1) purchasing logistical harvesting equipment; (2) operating logistical harvesting equipment; and (3) holding feedstock inventory, by using a multitude of crop types as feedstock, instead of just one, as is common in research and practice today. In so doing, this research challenges the prevalent assumption that monocultures, despite their known environmental concerns, are preferable from a costs perspective. Simulation/optimization is used to test supply chain designs, and then to find the environmental conditions where these new supply chain designs could be most profitably implemented. [Copyright &y& Elsevier]

Abstract: This paper provides a literature review of articles on the primary forest fuel supply chain which have been published in English speaking peer-reviewed journals from 1989 to 2011. The focus is on the key issues of the transportation of primary forest fuel to heat and/or power plants: (i) transportation modes, (ii) terminal types, and (iii) forest fuel supply chain management, and provides basics on the logistically relevant characteristics of wood as feedstock such as on various feedstock assortments. The analysed supply chains include the transshipment, storage, handling (e.g. chipping) and transportation of primary forest fuel from the place of harvest to energy conversion plant. Due to spatial distribution, low mass density, low energy density and low bulk density, the transportation of primary forest fuel is crucial for economic efficiency as well as for reduced CO2 emissions. As a consequence of forests accessibility, road transportation (after hauling the biomass to the forest road) is the first step of the modern primary forest fuel supply chain. For longer transportation distances, rail or waterway is preferred because of lower transportation costs per volume transported and lower CO2 emissions. We highlight that some experience exists in multimodal transport, including truck, train or ship. Intermodal transport, however, has not been studied in the past and, therefore, an outlook for the research requirements is made here. [Copyright &y& Elsevier]

Abstract: Renewable energy will play a crucial role in the future society of the 21st century. The various renewable energy sources need to be balanced and their use carefully planned since they are characterized by high temporal and spatial variability that will pose challenges to maintaining a well balanced supply and to the stability of the grid. This article examines the ways that future ‘energy landscapes’ can be modelled in time and space. Biomass needs a great deal of space per unit of energy produced but it is an energy carrier that may be strategically useful in circumstances where other renewable energy carriers are likely to deliver less. A critical question considered in this article is whether a massive expansion in the use of biomass will allow us to construct future scenarios while repositioning the ‘energy landscape’ as an object of study. A second important issue is the utilization of heat from biomass energy plants. Biomass energy also has a larger spatial footprint than other carriers such as, for example, solar energy. This article seeks to provide a bridge between energy modelling and spatial planning while integrating research and techniques in energy modelling with Geographic Information Science. This encompasses GIS, remote sensing, spatial disaggregation techniques and geovisualization. Several case studies in Austria and Germany demonstrate a top-down methodology and some results while stepwise calculating potentials from theoretical to technically feasible potentials and setting the scene for the definition of economic potentials based on scenarios and assumptions. [Copyright &y& Elsevier]

Abstract: The objective of this study was to explore the magnitude of Zimbabwe's biomass resources available for energy production using thermochemical conversion route. This involved estimation biomass from crops, forestry, livestock and Municipal Solid Residues (MSR). A model for estimating biomass energy potential was developed in Microsoft Excel. The crop and forestry production and livestock data used as a basis of calculations was obtained from FAOSTAT. The biomass residues available for energy production were calculated from residues produced considering economic and environmental concerns associated with the removal of crop residues from land and current residue uses. The energy content was obtained by multiplying the available biomass by specific biomass energy content. The total biomass energy was estimated at an annual average of 413.2 PJ but only 279.5 PJ (23.8% crops, 17.8% crop residues, 45.2% forestry resources, 12.2% livestock residue and 1.0% MSR) is sustainably available. Of this energy 189.3 PJ (26.3% from crop residue, 47.9% from woodfuel, 6.4% from forestry residue, 18.0% from livestock residue and 1.5% from MSR) can be used for energy production without competing for resources with food/feed production and other biomass applications. This can meet approximately 48% of the current energy consumption. [Copyright &y& Elsevier]

Abstract: Within the state of Oregon, USA, there is considerable interest in the possibility of converting forest biomass to energy. A number of studies have assessed the technical feasibility of forest biomass energy, but few have focused on social aspects, an important consideration in projects involving public forests. This study explores the social context of converting forest biomass to energy, using qualitative research methods. Semi-structured interviews were conducted with forty individuals representing nine different stakeholder groups. Information gained through interviews was used to understand stakeholder views on forest biomass energy, including their perspectives on potential barriers and opportunities in Oregon. Findings indicate the most challenging barrier will be access to long-term, consistent supply. A related challenge is the long history of contention between parties over forest products coming from public lands. However, findings also show that there are many areas of common ground between these groups that have historically been at odds, such as agreement on the necessity of restoration treatments in certain forest types, the by-product of which could be used for biomass generation. Potential conflicts still exist, for instance over projects in mixed conifer forests. Development of policies and projects through inclusive, collaborative approaches could alleviate controversies, potentially allowing more activities to move forward. Information provided by this research creates a foundation for discussions as forest biomass energy becomes an increasingly prominent issue in Oregon, the western USA, and other regions of the world. [ABSTRACT FROM AUTHOR]

Abstract: Bioenergy is seen as one of the key options to mitigate greenhouse gas emissions and substitute fossil fuels. Bioenergy is also an atypical energy source due to its diversity and inter-linkages with many other technological and policy areas. The goal of this paper is to analyze the Portuguese possibilities for bioenergy provision from biomass. The potentials of biomass, conversion technologies and legal framework are analysed and discussed. The result of this analysis shows that there are still unused potentials especially from forestry, which can contribute significantly to cover the bioenergy targets. However, the Portuguese experience with conversion technologies is limited to combustion, which is a drawback that must be solved so as to the bioenergy potential can be used. Research and Development projects, as well as demonstration projects are needed in order to improve the efficiency of the technological processes. At political level, Portuguese governments have been following the policies and strategies of the European Commission in the energy sector. However, energy crops market, due to the inter-linkage with agricultural policy, seems to need some additional political push. [Copyright &y& Elsevier]

Abstract: The interest in using Jatropha curcas L. (JCL) as a feedstock for the production of bio-diesel is rapidly growing. The properties of the crop and its oil have persuaded investors, policy makers and clean development mechanism (CDM) project developers to consider JCL as a substitute for fossil fuels to reduce greenhouse gas emissions. However, JCL is still a wild plant of which basic agronomic properties are not thoroughly understood and the environmental effects have not been investigated yet. Gray literature reports are very optimistic on simultaneous wasteland reclamation capability and oil yields, further fueling the Jatropha bio-diesel hype. In this paper, we give an overview of the currently available information on the different process steps of the production process of bio-diesel from JCL, being cultivation and production of seeds, extraction of the oil, conversion to and the use of the bio-diesel and the by-products. Based on this collection of data and information the best available practice, the shortcomings and the potential environmental risks and benefits are discussed for each production step. The review concludes with a call for general precaution and for science to be applied. [Copyright &y& Elsevier]

Abstract: A yield model for willow plantations for bioenergy production in Sweden was developed based on recorded production of 2082 commercial plantations during the period 1989–2005. The model predicts yield for the first, second and third harvest using oats (avena) production as agro-climatic index. The mean annual yields were 2.6, 4.2 and 4.5 oven dry tonnes (odt) per hectare during the first, second and third cutting cycles, respectively. The yield correlated inversely with the length of the cutting cycle. The results of the study show significant differences between growers, which suggest the importance of proper management in the establishment and tending of the plantations. Model estimates for 25% of the best growers vary from 4.0 to 6.3odtha−1 yr−1 in 5-year-rotation plantations during the first cutting cycle, and from 5.4 to 7.1odtha−1 yr−1 in 4-year-rotations for the second cutting cycle. The proposed model can be applied in policy making and for management planning. [Copyright &y& Elsevier]

Abstract: Loblolly pine plantations are the most important source of forest products in the US and the slash remaining after conventional harvest represents a significant potential source of bioenergy. However, slash removal in intensive harvests might, under some circumstances, reduce site productivity by reducing soil organic matter and associated nutrients. Two complimentary studies in the Gulf Coastal Plain of the southeastern US were designed to test whether harvest intensity (level of biomass removal) could have a negative long-term impact on site productivity. Harvesting tree crowns in addition to the merchantable bole had a negative impact (18%) on pine biomass accumulation by age 7–10 years on 15 of 19 research blocks. Sites at risk of harvest-induced reductions in productivity were relatively unproductive prior to harvest and had low soil phosphorus (P) concentrations. Intensive harvesting, fertilization, and chemical control of non-crop vegetation were all energy efficient; the additional biomass energy gained through these practices was two-orders of magnitude greater than the energy needed to conduct the activities. Harvest of slash for bioenergy in the Gulf Coastal Plain of the southeastern US has the potential to reduce productivity on infertile soils, but fertilization has the potential to restore and even improve productivity on those sites in an energy-efficient way. [Copyright &y& Elsevier]