Search

Bangladesh has encountered several challenges, including issues like overpopulation, energy shortage, and global warming for the last few decades. Addressing the increasing energy demand has become a crucial concern because of rapid increase in population and lack of growth in the economic. The electricity production of a country heavily relies on fossil fuels, particularly natural gas, which makes up approximately 54% of the current installed capacity. Bangladesh is an agrarian nation and biomass stands out as a source of renewable energy having significant potential to mitigate the demand for heat and electricity. Biomass resources in the country mainly comprise animal dung, agricultural crop residuals, solid waste from municipalities and forest residues. The existing biomass resources contribute to producing a high amount of energy and content of around 1574.16 PJ of energy equivalent to 437.28 TWh of electricity in which agricultural residues, animal manure, municipal solid waste, and forest residues impart around 852.32 PJ, 399.04 PJ, 112.16 PJ, and 210.64 PJ of energy respectively. This paper explores the extent, possibilities, and technologies associated with biomass energy conversion. Additionally, the study delves into the several biomass projects that the government, as well as non-governmental groups, are working on for environmental sustainability along with plans, challenges, and methods that are being utilized to encourage biomass technologies across Bangladesh. [Display omitted] • The biomass potentiality in Bangladesh for heat and electricity generation is emphasized. • The energy scenario and necessity of alternative energy sources in Bangladesh are discussed. • The available energy conversion technologies from biomass in Bangladesh are presented. • The existing biomass resource content of around 1574.16 PJ (437.28 TWh of electricity) of energy. • The economic aspects and challenges of biomass conversion into energy are discussed. [ABSTRACT FROM AUTHOR]

The cultivation of energy cane throughout the Southeastern United States may displace grazed pastures on organic soil (Histosols) to meet growing demands for biofuels. We combined results from a field experiment with a biogeochemical model to improve our understanding of how the conversion of pasture to energy cane during early crop establishment affected soil GHG (CO 2 , CH 4 , and N 2 O) exchange with the atmosphere. GHG fluxes were measured under both land uses during wet, hot and cool, dry times of year, and following a fertilization event. We also simulated the impact of changes in precipitation on GHG exchange. Higher fertilization of cane contributed to greater emission of N 2 O than pasture during warmer and wetter times of the year. The model predicted that energy cane emitted more nitrogen than pasture during simulated wetter than drier years. The modeled emission factor for N 2 O was 20 to 30-fold higher than the default value from IPCC (1%), suggesting that the default IPCC value could dramatically underestimate the consequences of this land conversion on the climate system. Predicted soil CH 4 and CO 2 fluxes were higher in pasture than energy cane, and this difference was not affected by increasing precipitation. Model simulations predicted that soils under first year cane emit more GHGs than pasture, particularly during wet years, but this difference disappeared two years after energy cane establishment. Our results suggest that management practices may be important in determining soil GHG emissions from energy cane on organic soils particularly during the first year of cane establishment. [ABSTRACT FROM AUTHOR]

The conversion of biomass to hydrocarbon transportation fuels presents unique challenges that generally focus on maintaining high mass and energy yields while removing oxygen from the biomass. Among the many processes proposed and demonstrated, processes that can achieve this efficiently and economically will have a clear advantage. Currently, there is no graphical method to analyze such conversion processes. In this work, we introduce a Funnel Plot to indicate both product quality, in terms of oxygen removal, and energy yield, the energy retained in the product oil from the original biomass. The Funnel Plot is applied to literature data for several processes and compared to an idealized chemical conversion of biomass revealing some of the current challenges associated with biofuel production. [ABSTRACT FROM AUTHOR]

At pH 4.8 and 50 °C, semi-continuous countercurrent saccharification was performed using α-cellulose. Every second day, solids and liquids were transferred countercurrently and liquid samples were taken to determine sugar concentration in each stage. Train 1 (5 mg protein/g biomass, 8 stages) achieved 87.8% glucose conversion and 102 g/L total sugar. Train 2 (2 mg/g, 8 stages) achieved 56.1% glucose conversion and 65 g/L total sugar. Train 3 (2 mg/g, 16 bottles) achieved 73.6% glucose conversion and 67 g/L total sugar. Compared to 5-day batch saccharification, to achieve the same glucose conversion, enzyme requirements were reduced by factors of 16.8, 8, and 20.5 for Trains 1, 2, and 3, respectively. Further improvements can be realized by changing the enzyme addition point and increasing the number of stages. [ABSTRACT FROM AUTHOR]

Research is focused on the utilisation of waste or residue biomass for bioenergy conversion. A promising conversion technology for the production of liquid biofuels from residue biomass is a process called Thermo-Catalytic Reforming (TCR ®​ ) which is a combination of prior thermal treatment of the biomass at mild temperatures (intermediate pyrolysis) followed by a second catalytic treatment step at elevated temperatures (reforming). This article focuses on the conversion of TCR ® liquids from digestate as a feedstock for subsequent hydrocarbon production. The generated bio-oil showed a lower heating value of 34.0 MJ kg − 1 with an oxygen content of 7.0% and a water content of 2.2%. The bio-oil was hydrodeoxygenated using an industrial NiMo–Al 2 O 3 catalyst at temperatures of 503 K–643 K and a pressure of 14 MPa. The hydrodeoxygenated bio-oil reached a lower heating value of 42.3 MJ kg −1 with an oxygen content below 0.8 mg kg −1 and water content of 30 ppm. Product yields and catalyst life give confidence that upgrading of the TCR ®​ bio-oil offers a suitable option to meet the high standards of common fuels. [ABSTRACT FROM AUTHOR]

The conversion of lignocellulosic biomass to ethanol involves three major unit operations such as pretreatment, hydrolysis and fermentation. Each unit operation involves processing of biomass with changes in its structure, and release of fermentable and other sugars and lignin degrading compounds. The evaluation of biomass conversion processes through material balance is fundamentally crucial in its commercialization. This gives an idea about the transfer of biomass from one phase to another and hence eventually of the efficiency of the total process. In the present study, material balance has been evaluated in each unit operations for sorghum biomass to ethanol conversion. An account of carbohydrates in the native as well as pretreated sorghum biomass, the release of fermentable sugars and the conversion of sugars to ethanol was maintained and analysed. Ethanol yield of 91.94 g per kg sorghum was achieved without any detoxification and washing of pretreated biomass after mild acid pretreatment followed by enzymatic hydrolysis and fermentation. [ABSTRACT FROM AUTHOR]

Wheat straw has a vast potential as feedstock for biofuel production in China. However, little information is available regarding variation in cell wall composition and enzymatic digestibility of wheat straw. This study investigated cell wall compositions and biomass digestibility of the straw of 115 wheat accessions from central China using a 1% NaOH pretreatment and mixed enzymatic hydrolysis. Significant variation in cell wall composition and sugar release was observed, with a coefficient variation (CV) ranging from 4.7% to 21.2%. Cellulose, hemicelluloses, alkali detergent hemicelluloses (ADH), and acid insoluble lignin (AIL) positively correlated with each other, and they all negatively correlated with acid soluble lignin (ASL). Hexose yields had a negative correlation with ADH and AIL, and positive correlation with ASL. No apparent undesirable correlation was found between sugar release and grain yield, thus yield and biomass convertibility can be potentially improved simultaneously. Furthermore, the features of the cell wall constitutions were compared with other plants and their implication in determining the best possible conversion strategy was discussed. This initial study is essential to understand the cell wall composition of wheat straw and to explore the potential of wheat straw as feedstock for biofuel production. [ABSTRACT FROM AUTHOR]

Microbial fuel cells (MFCs) provide an efficient way to utilize energy from biomass while it offer advantages such as pollution avoidance, high energy conversion efficiency, and flexibility for a wide range of applications. MFCs have gained much attention and are considered as current research hotspot in bioenergy. To further improve the reaction area, microbial compatibility, and to increase the power generation efficiency in the design and manufacturing of a small-scale MFC, the use of 3D printing technology and the employment of a high-efficiency mixing area are proposed in this work. Carbon cloth is employed as the electrode substrate of the MFC. Moreover, the carbon nanotubes and graphene dispersions are used to modify the carbon electrode plates. The results show that the graphene modified carbon cloth electrode MFC has a maximum power density of 199.24 mW m−2 at a current density of 1.52 A m−2. While the unmodified carbon cloth electrode MFC has a current density of 0.63 A m−2. This indicates that the graphene modified carbon cloth electrode MFC achieved a maximum power density of about 232% compared with the unmodified carbon cloth electrode MFC. The lowest internal resistance obtained was 0.66 kΩ when the electron transfer medium was accounted. This indicated a low anode impedance which is desired in MFC systems. Result revealed that the graphene modified carbon cloth electrode is the best electrode material based on the enhanced power density and lowered internal resistance. The results of the work aims to provide insight in the improvement of the MFC electrode modification technology. • The study aims to improve the power generation efficiency of MFCs. • Carbon cloth is employed as an electrode substrate. • A designed mixer is introduced to enhance the reaction rate in the MFCs. • Results have shown a maximum power density of 0.633 A m−2. • Carbon cloth and graphene are the best choices as plate materials. [ABSTRACT FROM AUTHOR]