Search

Surface reactions were performed on polypropylene (PP) surfaces to retard the simultaneous growth of Staphylococcus aureus (S. aureus) and Pseudomonas putida (P. putida) bacteria. Microwave plasma reactions in the presence of maleic anhydride (MA) resulted in the formation of acid groups on the surface of PP. Such surfaces were further modified by conducting two parallel reactions: (1) poly(ethylene glycol) (PEG) was attached to COOH groups of the PP surface, followed by penicillin V (PEN) reactions to target S. aureus destruction and (2) diglycidyl PEG was attached, followed by gentamicin (GEN) reactions, to create antimicrobial surfaces targeted at P. putida . Simultaneous gram "+" and gram "-" resistance was obtained by varying the PEN/GEN ratios on such modified PP surfaces, thus providing the controllable degree of gram "+" and gram "-" antimicrobial strength. While spectroscopic analyses revealed chemical attachments of PEN and GEN, the effectiveness against proliferation of S. aureus (Gram +) and P. putida (Gram -) bacteria was determined using liquid culture tests. These studies show for the first time the formation of tunable antimicrobial polypropylene surfaces with controllable strength.

The broad spectrum antibiotic, ampicillin (AM), was reacted to expanded poly (tetrafluoroethylene) (ePTFE) surfaces and resulted in the formation of antimicrobial surfaces effective against gram-positive, Staphylococcus aureus, Bacillus thuringiensis, and Enterococcus faecalis, and gram-negative, Escherichia coli, Pseudomonas putida, and Salmonella enterica bacteria. These ePTFE surface modifications were accomplished by utilization of microwave maleic anhydride (MA) plasma reactions leading to the formation of acid groups, followed by amidation reactions of heterofunctional NH 2/COOH-terminated polyethylene glycol (PEG). The final step, the attachment of AM to the PEG spacer, was achieved by amidation reactions between COOH-terminated PEG and NH 2 groups of AM. This approach protects the COOH-AM functionality and diminishes the possibility of hydrolysis of the antimicrobial active portion of AM. These studies also show that approximately 90% of AM molecules are still covalently attached to PEG-MA-ePTFE surfaces after exposure to the bacteria solutions. Even after a 24 h period, the AM volume concentration changes only from 2.25 to 2.04 microg/m3, and depending upon the bacteria type, the bacteria suspensions containing AM-PEG-MA-ePTFE specimens retain 85-99% of their initial optical density.

Methyl methacrylate (MMA) and n-butyl acrylate (nBA) were copolymerized into stable colloidal particles in the presence of micelle forming sodium dioctyl sulfosuccinate (SDOSS) and liposome forming 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) in aqueous media that serve as thermodynamically stable loci for lipophilic monomers and nanostructured templates. These studies show for the first time that hollow colloidal particles may coalesce to form polymeric films and the combination of SDOSS and DLPC dispersing agents provides a stimuli-responsive environment during film formation through which individual surface stabilizing components can be driven to the film-air (F-A) or film-substrate (F-S) interface. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) of p-MMA/nBA colloidal dispersions revealed preferential and enhanced mobility of SDOSS and DLPC lipid rafts to the F-A and F-S interfaces in response to thermal, ionic, and enzymatic stimuli.

Recent studies identified and established a platform of polymer surface modifications allowing the attachment of penicillin (PEN) to expanded poly(tetrafluoroethylene) (ePTFE) surfaces. The effectiveness of this approach was accomplished by creating surfaces with chemically attached PEN that prevent the proliferation of microbes. In this study, quantitative assessments of PEN effectiveness attached to ePTFE were conducted. Using variable-angle attenuated total reflectance (ATR-FTIR) spectroscopy, the volume concentration changes of PEN were determined as a function of depth from the ePTFE surface. At depths ranging from 0.2 to 1.2 mum from the surface, PEN concentration levels decrease from 8.85 to 3.33 mug/m3. Assessments of concentration levels of the colony forming units (CFUs) of Staphylococcus aureus bacteria as a function of contact time with the penicillin-polyethylene glycol spacer separated by maleic anhydride ePTFE (PEN-PEG-MA-ePTFE) surfaces showed profound effectiveness of PEN in preventing microbial proliferation. Hydrolytic stability of PEN-PEG-MA-ePTFE surfaces revealed that even with a 32% loss of PEN due to the cleavage of the ester linkages between PEN and PEG spacer, antimicrobial activity is still maintained.

Expanded polytetrafluoroethylene (ePTFE) was chemically modified to retard the growth of Staphylococcus aureus bacteria. This was accomplished by microwave plasma reactions in the presence of maleic anhydride (MA) to create acid functional groups on ePTFE surfaces, followed by esterification reactions with 200 and 600 molecular weight linear polyethylene glycol (PEG). Such surfaces were utilized for further reactions with penicillin (PEN) through etherification reactions to create anti-microbial surfaces. These reactions resulted in surface morphological changes, and spectroscopic analysis using attenuated total reflectance Fourier transform infrared spectroscopy (ATR FT-IR) revealed the formation of ester linkages resulting from reactions between PEN and PEG functionalities. Antibacterial activities were evaluated by a series of experiments where PEN-modified ePTFE specimens were immersed in a liquid aureus culture, and the bacteria growth was quantified by measuring % absorbance of the suspension at 600 nm wavelength. The lowest absorbance was observed for the solution containing PEN-PEG-MA-ePTFE specimens, thus showing highly effective anti-bacterial activity toward gram-positive Staphylococcus aureus bacteria. To our best knowledge, this is the first study that shows PEN-ePTFE surface modifications that are effective against gram-positive aureus bacteria.

Recently, we reported that it is possible to utilize sugars as stabilizing agents for colloidal particles. This study shows that when n-dodecyl beta-D-maltoside (DDM) is utilized as a dispersing and stabilizing agent in the synthesis and stabilization of poly[methyl methacrylate-co-(n-butyl acrylate)] (p-MMA/nBA) colloidal particles, stable colloidal dispersions can be formed. Since understanding of sugar-protein interactions have numerous practical and scientific implications, these studies examine DDM-stabilized p-MMA/nBA colloidal particles and their specific binding properties with concanavalin A (Con A). By use of spectroscopic analysis, unique binding characteristics that are a function of DDM concentration, time, and the concentration of Con A are detected. When DDM-stabilized p-MMA/nBA particles are allowed to coalesce, DDM is released from the particle surfaces and, under suitable conditions, selectively stratifies in the areas of the excess of interfacial energy near the film-air (F-A) interface, thus providing sites for attracting Con A via alpha-glucose-OH hydrogen bonding. Consequently, adsorption of Con A at the F-A interfaces occur and the degree of adsorption is controlled by the amount of DDM at the F-A interface.

Although the use of sugar and sugar derivatives has been documented in polymer research for many years, there are no reports that would utilize these species as polymerization sites of colloidal polymeric particles that, later on, may be released during particle coalescence to form films with surfaces that differentiate protein adsorption. These studies show that, when n-dodecyl-beta-D-maltoside (DDM) is utilized for the synthesis and stabilization of poly[methyl methacrylate-co-(n-butyl acrylate)] (p-MMA/nBA) colloidal particles, upon particle coalescence DDM stratifies near the film-air (F-A) interface. By using attenuated total reflectance Fourier transform infrared (ATR FT-IR) spectroscopy and internal reflection infrared imaging (IRIRI), comparative adsorption studies on p-MMA/nBA surfaces exposed to globulin (Glo), fibrinogen (Fib), and bovine serum albumin (BSA) reveal that the presence of DDM selectively inhibits Glo and Fib adsorption, but does not affect BSA. The presence of DDM also enhances the rate of mobility of sodium dioctylsulfosuccinate (SDOSS) resulting from interactions between DDM and SDOSS moieties, and the surface morphologies change as a result of concentration variations of DDM in the colloidal dispersions.

These studies show that single-walled carbon nanotubes (SWNTs) can be effectively modified using phospholipids. Using a simple surface modification of SWNTs, followed by deposition of 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphoethanolamine (DCPE) phosphipid, results in stable water-dispersible SWNTs with highly uniform thickness.

This communication outlines a simple two-step approach of modification of 1 nm diameter Au nanoparticles using an aqueous solution of (1,2-dipalmitoyl-sn-glycero-3-phosphothio-ethanol) phospholipid (PL). Transmission electron microscopy as well as particle size analysis show that, as a result of PL reactions with Au particles, the initial Au nanoparticle size increases to 5 nm. Considering the size of the PL and their ability to form liposomes, 5 nm diameter spheres indicate that the PL bilayer was attached to the surface of Au particles and the PL-Au interactions are facilitated by the presence of thiol functionality. The change of surface electronic properties of PL-stabilized Au particles is manifested by the disappearance of the 217 and 290 nm absorbances due to 5d-6sp transitions in Au, which is likely attributed to the presence of S-H functionalities which increase the free electron density of the particle. As a consequence, two surface plasmons resulting from a collective oscillation of electrons in response to UV excitation disappear.

This study presents a small-scale polymerization of high molecular weight methyl methacrylate/n-butyl acrylate (MMA/n-BA) colloidal particles that are synthesized in an aqueous environment in the presence of phospholipid hydrogenated soybean phosphatidylcholine (HSPC) molecules that also serve as the particle stabilizing agents. When such particles coalesce to form polymeric films, they release phospholipids, which, in turn, form organized structures near the film-air (F-A) interface. Diffusion and mobility of phospholipid molecules are affected not only by their compatibility with colloidal particles but also by electrolyte environments of colloidal dispersions. When Na(+), K(+), and Ca(2+) counterions are added to MMA/n-BA aqueous colloidal dispersions stabilized with HSPC, and such films are coalesced, different degrees of diffusion of HSPC to the F-A interface exist, depending on the counterion, and conformational changes of HSPC result. For example, in the presence of Ca(2+), HSPC molecules collapse entropically to form random surface layers, as opposed to smaller Na(+) and K(+), which force amphiphilic HSPC ends to align preferentially parallel to the film surface. These studies show that it is possible to design stimuli-response colloidal systems triggered by chemical environments of active molecules on colloidal polymer particles.