Search

We report a polypeptide-based thermogel as a new tool for hypothermic storage of stem cells at ambient temperature (25 °C). Stem cells were suspended in the sol state (10 °C) of an aqueous poly(ethylene glycol)-poly(l-alanine) (PEG-PA) solution (4.0 wt %) in phosphate-buffered saline (PBS), which turned into a stem cell-incorporated gel by a heat-induced sol-to-gel transition. The cell harvesting procedure from the thermogels was simply performed through a gel-to-sol transition by diluting and cooling the system. More than 99% of stem cells died in PBS and Pluronic F127 thermogel (control thermogel) when the cells were stored at 25 °C for 7 days. The cell recovery rate from the PEG-PA thermogel (64%) was significantly greater than that from the commercially available HypoThermosol FRS preservation solution (HTS) (26%). Additionally, the surviving stem cells from the PEG-PA thermogel were healthier than those from HTS in terms of (1) expression of stemness biomarkers (NANOG, OCT4, and SOX2), (2) proliferation rate, and (3) differentiation potentials into osteogenic, chondrogenic, and adipogenic lineages. Membrane stabilization was suggested as a cell protection mechanism in the cytocompatible PEG-PA thermogel. The PEG-PA thermogel provides a convenient cytocompatible way for the storage and recovery of cells and thus is a promising tool for the transportation and short-term banking of cells.

This contribution describes the design and synthesis of multifunctional micelles based on amphiphilic brush block copolymers (BBCPs) for imaging and selective drug delivery of natural anticancer compounds. Well-defined BBCPs were synthesized via one-pot multi-step sequential grafting-through ring-opening metathesis polymerization (ROMP) of norbornene-based macroinitiators. The norbornenes employed contain a poly(ethylene glycol) methyl ether chain, an alkyl bromide chain, and/or a near-infrared (NIR) fluorescent cyanine dye. After block copolymerization, post-polymerization transformations using bromide-azide substitution, followed by the strain-promoted azide-alkyne cycloaddition (SPAAC) allowed for the functionalization of the BBCPs with the piplartine (PPT) moiety, a natural product with well-documented cytotoxicity against cancer cell lines, via an ester linker between the drug and the polymer side chain. The amphiphilic BBCPs self-assembled in aqueous media into nano-sized spherical micelles with neutral surface charges, as confirmed by dynamic light scattering analysis and transmission electron microscopy. During self-assembly, paclitaxel (PTX) could be effectively encapsulated into the hydrophobic core to form stable PTX-loaded micelles with high loading capacities and encapsulation efficiencies. The NIR fluorescent dye-containing micelles exhibited remarkable photophysical properties, excellent colloidal stability under physiological conditions, and a pH-induced disassembly under slightly acidic conditions, allowing for the release of the drug in a controlled manner. The in vitro studies demonstrated that the micelles without the drug (blank micelles) are biocompatible at concentrations of up to 1 mg mL-1 and present a high cellular internalization capacity toward MCF-7 cancer cells. The drug-functionalized micelles showed in vitro cytotoxicity comparable to free PPT and PTX against MCF-7 and PC3 cancer cells, confirming efficient drug release into the tumor environment upon cellular internalization. Furthermore, the drug-functionalized micelles exhibited higher selectivity than the pristine drugs and preferential cellular uptake in human cancer cell lines (MCF-7 and PC3) when compared to the normal breast cell line (MCF10A). This study provides an efficient strategy for the development of versatile polymeric nanosystems for drug delivery and image-guided diagnostics. Notably, the easy functionalization of BBCP side chains via SPAAC opens up the possibility for the preparation of a library of multifunctional systems containing other drugs or functionalities, such as target groups for recognition.

[Abstract] The use of supramolecular polymers to construct functional biomaterials is gaining more attention due to the tunable dynamic behavior and fibrous structures of supramolecular polymers, which resemble those found in natural systems, such as the extracellular matrix. Nevertheless, to obtain a biomaterial capable of mimicking native systems, complex biomolecules should be incorporated, as they allow one to achieve essential biological processes. In this study, supramolecular polymers based on water-soluble benzene-1,3,5-tricarboxamides (BTAs) were assembled in the presence of hyaluronic acid (HA) both in solution and hydrogel states. The coassembly of BTAs bearing tetra(ethylene glycol) at the periphery (BTA-OEG4) and HA at different ratios showed strong interactions between the two components that led to the formation of short fibers and heterogeneous hydrogels. BTAs were further covalently linked to HA (HA-BTA), resulting in a polymer that was unable to assemble into fibers or form hydrogels due to the high hydrophilicity of HA. However, coassembly of HA-BTA with BTA-OEG4 resulted in the formation of long fibers, similar to those formed by BTA-OEG4 alone, and hydrogels were produced with tunable stiffness ranging from 250 to 700 Pa, which is 10-fold higher than that of hydrogels assembled with only BTA-OEG4. Further coassembly of BTA-OEG4 fibers with other polysaccharides showed that except for dextran, all polysaccharides studied interacted with BTA-OEG4 fibers. The possibility of incorporating polysaccharides into BTA-based materials paves the way for the creation of dynamic complex biomaterials. The authors acknowledge the ICMS Animation Studio for providing the artwork. S.V.-A. and G.M. acknowledge the funding received by Gravitation Program “Materials Driven Regeneration,” funded by the Netherlands Organization for Scientific Research (024.003.013). J.M. acknowledges a Marie Skłodowska-Curie postdoctoral fellowship (794016) for financial support. G.M. acknowledges the funding received by the Swiss National Science Foundation (SNSF “Early PostDoc Mobility” P2EZP2-178435). R.C. acknowledges TA Instruments for providing the DHR-3 rheometer under the Young Distinguished Rheologist Award instrument grant. S.S. and E.W.M acknowledge the European Research Council (H2020-EU.1.1., SYNMAT project, ID 788618). Netherlands Organisation for Scientific Research; 024.003.013 Swiss National Science Foundation; P2EZP2-178435

Dual-function antibacterial surfaces have exhibited promising potential in addressing implant-associated infections. However, both bactericidal and antifouling properties need to be further improved prior to practical uses. Herein, we report the preparation and properties of a linear block copolymer coating (LP-KF) and a single-chain nanoparticle coating (NP-KF) with poly(ethylene glycol) (PEG) and cationic polypeptide segments. NP-KF with cyclic PEG segments and densely charged polypeptide segments was expected to display improved bactericidal and antifouling properties. LP-KF was prepared by the combination of ring-opening polymerization of N-carboxyanhydride (NCA) monomers and subsequent deprotection. NP-KF was prepared by intramolecular cross-linking of LP-KF in diluted solutions. Both LP-KF- and NP-KF-coated PDMS surfaces were prepared by dipping with polydopamine-coated surfaces. They showed superior in vitro bactericidal activity against both Staphylococcus aureus and Escherichia coli with >99.9% killing efficacy, excellent protein adsorption resistance, antibacterial adhesion, and low cytotoxicity. The NP-KF coating showed higher bactericidal activity and antifouling properties than its linear counterpart. It also showed significant anti-infective property and histocompatibility in vivo, which makes it a good candidate for implants and biomedical device applications.

Radical polymerization is one of the most widely used methods for the synthesis of polymeric materials for biomedical applications, such as drug delivery, 3D cell culture, and regenerative medicine. Among radical polymerization reactions, thiol-ene click chemistry has shown excellent orthogonality in diverse reaction conditions. However, our preliminary investigations revealed that it fails in cell culture environment. Herein, we investigate the mechanisms by which cell culture media interfere with radical photoreactions. Three different models including free radical linear photopolymerization (N,N-dimethylacrylamide photopolymerization), free radical photohydrogelation (poly(ethylene glycol) diacrylate photohydrogelation), and thiol-ene photohydrogelation (4-arm poly(ethylene glycol)-norbornene thiol-ene photohydrogelation) were investigated. We showed that common cell culture media ingredients can interfere with radical polymerization by two different pathways; namely, radical chain transfer and radical scavenging effects. Thiol-ene photoclick hydrogelation was seriously affected by cell culture media especially under the alkaline conditions of many of them, due to the impact of deprotonation of the thiol reactant. We intend these findings to serve as a reference guide to researchers employing free radical-based molecular synthesis in cell culture settings. The nonbenign impact of media components, pH, and concentration should provide a cue for future studies that aim to prepare well-defined polymeric materials in the presence of cell culture media.

This study provides a significant contribution to the development of multiple hydrogen-bonded supramolecular nanocarrier systems by demonstrating that controlling the hydrogen bond strength within supramolecular polymers represents a crucial factor to tailor the drug delivery performance and enhance the effectiveness of cancer therapy. Herein, we successfully developed two kinds of poly(ethylene glycol)-based telechelic polymers Cy-PEG and UrCy-PEG having self-constituted double and quadruple hydrogen-bonding cytosine (Cy) and ureido-cytosine (UrCy) end-capped groups, respectively, which directly assemble into spherical nanogels with a number of interesting physical characteristics in aqueous solutions. The UrCy-PEG nanogels containing quadruple hydrogen-bonded UrCy dimers exhibited excellent long-term structural stability in a serum-containing biological medium, whereas the double hydrogen-bonded Cy moieties could not maintain the structural integrity of the Cy-PEG nanogels. More importantly, after the drug encapsulation process, a series of in vitro experiments clearly confirmed that drug-loaded UrCy-PEG nanogels induced selective apoptotic cell death in cancer cells without causing significant cytotoxicity to healthy cells, while drug-loaded Cy-PEG nanogels exerted nonselective cytotoxicity toward both cancer and normal cells, indicating that increasing the strength of hydrogen bonds in nanogels plays a key role in enhancing the selective cellular uptake and cytotoxicity of drugs and the subsequent induction of apoptosis in cancer cells.

Smart insulin delivery systems now play essential roles in diabetes treatment, whereas most existing systems suffer from insufficient regulation against blood glucose. Here, a glucose and pH dual-responsive insulin delivery system with multilevel self-regulation of blood glucose was constructed. Photocross-linked dual-responsive polymersomes were prepared by the self-assembly of the diblock copolymer methoxyl poly(ethylene glycol)-b-poly[3-acrylamidophenylboronic acid-co-2-(diethylamino)ethyl methacrylate-co-2-hydroxy-4-(methacryloyloxy)benzophenone] (mPEG-b-P(AAPBA-co-DEAEMA-co-BMA)) synthesized by reversible addition-fragmentation chain transfer polymerization (RAFT), where insulin and glucose oxidase (GOx) were co-encapsulated inside. It is worth noting that the polymersomes with tunable membrane permeability are the first glucose-responsive platform consisting of both PBA and GOx. According to the pH change produced by gluconic acid, the pH-sensitive monomer DEAEMA endowed the polymersome membrane with multilevelly tunable and self-regulative permeability, further controlling the release behavior of insulin. This multilevel tunability was reflected directly in in vitro insulin release tests and was proven by the self-regulation of blood glucose in vivo. Promisingly, the polymersomes have great potential to be applied for the self-regulation of blood glucose in the treatment of diabetes.

Proteins are an impactful class of therapeutics but can exhibit suboptimal therapeutic performance, arising from poor control over the timescale of clearance. Covalent PEGylation is one established strategy to extend circulation time but often at the cost of reduced activity and increased immunogenicity. Supramolecular PEGylation may afford similar benefits without necessitating that the protein be permanently modified with a polymer. Here, we show that insulin pharmacokinetics can be modulated by tuning the affinity-directed dynamics of a host-guest motif used to non-covalently endow insulin with a poly(ethylene glycol) (PEG) chain. When administered subcutaneously, supramolecular PEGylation with higher binding affinities extends the time of total insulin exposure systemically. Pharmacokinetic modeling reveals that the extension in the duration of exposure arises specifically from decreased absorption from the subcutaneous depot governed directly by the affinity and dynamics of host-guest exchange. The lifetime of the supramolecular interaction thus dictates the rate of absorption, with negligible impact attributed to association of the PEG upon rapid dilution of the supramolecular complex in circulation. This modular approach to supramolecular PEGylation offers a powerful tool to tune protein pharmacokinetics in response to the needs of different disease applications.

New therapeutic strategies for personalized medicine need to involve innovative pharmaceutical tools, for example, modular nanoparticles designed for direct immunomodulatory properties. We synthesized mannose-functionalized poly(propyleneimine) glycodendrimers with a novel architecture, where freely accessible mannose moieties are presented on poly(ethylene glycol)-based linkers embedded within an open-shell maltose coating. This design enhanced glycodendrimer bioactivity and led to complex functional effects in myeloid cells, with specific induction of interleukin-8 expression by mannose glycodendrimers detected in HL-60 and THP-1 cells. We concentrated on explaining the molecular mechanism of this phenomenon, which turned out to be different in both investigated cell lines: in HL-60 cells, transcriptional activation via AP-1 binding to the promoter predominated, while in THP-1 cells (which initially expressed less IL-8), induction was mediated mainly by mRNA stabilization. The success of directed immunomodulation, with synthetic design guided by assumptions about mannose-modified dendrimers as exogenous regulators of pro-inflammatory chemokine levels, opens new possibilities for designing bioactive nanoparticles.

Off-target interactions between reactive hydrogel moieties and drug cargo as well as slow reaction kinetics and the absence of controlled protein release over an extended period of time are major drawbacks of chemically cross-linked hydrogels for biomedical applications. In this study, the inverse electron demand Diels-Alder (iEDDA) reaction between norbornene- and tetrazine-functionalized eight-armed poly(ethylene glycol) (PEG) macromonomers was used to overcome these obstacles. Oscillatory shear experiments revealed that the gel point of a 15% (w/v) eight-armed PEG hydrogel with a molecular weight of 10 kDa was less than 15 s, suggesting the potential for fast in situ gelation. However, the high-speed reaction kinetics result in a risk of premature gel formation that complicates the injection process. Therefore, we investigated the effect of polymer concentration, temperature, and chemical structure on the gelation time. The cross-linking reaction was further characterized regarding bioorthogonality. Only 11% of the model protein lysozyme was found to be PEGylated by the iEDDA reaction, whereas 51% interacted with the classical Diels-Alder reaction. After determination of the mesh size, fluorescein isothiocyanate-dextran was used to examine the release behavior of the hydrogels. When glucose oxidase was embedded into 15% (w/v) hydrogels, a controlled release over more than 250 days was achieved. Overall, the PEG-based hydrogels cross-linked via the fast iEDDA reaction represent a promising material for the long-term administration of biologics.

Progressive stiffening of the extracellular matrix (ECM) is observed in tissue development as well as in pathologies such as cancer, cardiovascular disease, and fibrotic disease. However, methods to recapitulate this phenomenon in vitro face critical limitations. Here, we present a poly(ethylene glycol)-based peptide-functionalized ECM-mimetic hydrogel platform capable of facile, user-controlled dynamic stiffening. This platform leverages supramolecular interactions between inverse-electron demand Diels-Alder tetrazine-norbornene click products (TNCP) to create pendant moieties that undergo non-covalent crosslinking, stiffening a pre-existing network formed via thiol-ene click chemistry over the course of 6 h. Pendant TNCP moieties have a concentration-dependent effect on gel stiffness while still being cytocompatible and permissive of cell-mediated gel degradation. The robustness of this approach as well as its simplicity and ease of translation give it broad potential utility.

International audience; A rapid photo-curing system based on poly(2-ethyl-2-oxazoline-co-2-allylamidopropyl-2-oxazoline) and its in vivo compatibility are presented. The base polymer was synthesized from the copolymerization of 2-ethyl-2-oxazoline (EtOx) and the methyl ester containing 2-methoxycarboxypropyl-2-oxazoline (C 3 MestOx) followed by amidation with allylamine to yield a highly water-soluble macromer. We showed that spherical hydrogels can be obtained by a simple waterin-oil gelation method using thiol−ene coupling and investigated the in vivo biocompatibility of these hydrogel spheres in a 28-day murine subdermal model. For comparison, hydrogel spheres prepared from poly(ethylene glycol) were also implanted. Both materials displayed mild, yet typical foreign body responses with little signs of fibrosis. This is the first report on the foreign body response of a poly(2-oxazoline) hydrogel, which paves the way for future investigations into how this highly tailorable class of materials can be used for implantable hydrogel devices.

Bone is an attractive site for metastatic cancer cells and has been considered as "soil" for promoting tumor growth. However, accumulating evidence suggests that some bone cells (e.g., osteocytes) can actually suppress cancer cell migration and invasion via direct cell-cell contact and/or through cytokine secretion. Toward designing a biomimetic niche for supporting 3D osteocyte culture, we present here a gelatin-based hydrogel system with independently tunable matrix stiffness and viscoelasticity. In particular, we synthesized a bifunctional macromer, gelatin-norbornene-boronic acid (i.e., GelNB-BA), for covalent cross-linking with multifunctional thiol linkers [e.g., four-arm poly(ethylene glycol)-thiol or PEG4SH] to form thiol-NB hydrogels. The immobilized BA moieties in the hydrogel readily formed reversible boronate ester bonds with 1,3-diols on physically entrapped poly(vinyl alcohol) (PVA). Adjusting the compositions of GelNB-BA, PEG4SH, and PVA afforded hydrogels with independently tunable elasticity and viscoelasticity. With this new dynamic hydrogel platform, we investigated matrix mechanics-induced growth and cytokine secretion of encapsulated MLO-A5 pre-osteocytes. We discovered that more compliant or viscoelastic gels promoted A5 cell growth. On the other hand, cells encapsulated in stiffer gels secreted higher amounts of pro-inflammatory cytokines and chemokines. Finally, conditioned media (CM) collected from the encapsulated MLO-A5 cells (i.e., A5-CM) strongly inhibited breast cancer cell proliferation, invasion, and expression of tumor-activating genes. This new biomimetic hydrogel platform not only serves as a versatile matrix for investigating mechano-sensing in osteocytes but also provides a means to produce powerful anti-tumor CM.

Poly(ethylene glycol) (PEG) is well known to endow nanoparticles (NPs) with low-fouling and stealth-like properties that can reduce immune system clearance in vivo, making PEG-based NPs (particularly sub-100 nm) of interest for diverse biomedical applications. However, the preparation of sub-100 nm PEG NPs with controllable size and morphology is challenging. Herein, we report a strategy based on the noncovalent coordination between PEG-polyphenolic ligands (PEG-gallol) and transition metal ions using a water-in-oil microemulsion phase to synthesize sub-100 nm PEG NPs with tunable size and morphology. The metal-phenolic coordination drives the self-assembly of the PEG-gallol/metal NPs: complexation between MnII and PEG-gallol within the microemulsions yields a series of metal-stabilized PEG NPs, including 30-50 nm solid and hollow NPs, depending on the MnII/gallol feed ratio. Variations in size and morphology are attributed to the changes in hydrophobicity of the PEG-gallol/MnII complexes at varying MnII/gallol ratios based on contact angle measurements. Small-angle X-ray scattering analysis, which is used to monitor the particle size and intermolecular interactions during NP evolution, reveals that ionic interactions are the dominant driving force in the formation of the PEG-gallol/MnII NPs. pH and cytotoxicity studies, and the low-fouling properties of the PEG-gallol/MnII NPs confirm their high biocompatibility and functionality, suggesting that PEG polyphenol-metal NPs are promising systems for biomedical applications.

We report here the first evidence for the interaction of poly(ethylene glycol) (PEG) with hyaluronan (HA) in aqueous solutions. PEG-HA complexes (Kapp = 45,000 ± 8000 M-1) contained about 3.3 ± 0.1 of ethylene glycol units per disaccharide of HA. The carboxyl of the D-glucuronic acid and the amide of the N-acetyl-D-glucosamine did not participate in PEG binding. Similar experiments performed with dextran and monosaccharides showed that multiple free primary hydroxyls regularly distributed along the polysaccharide chain are necessary for PEG binding. Another novelty of our study is contraction of HA upon PEG binding. The effect was observed with HA in solution or adsorbed on positively charged liposomes. The thickness of the HA layer on the liposomes decreased 2-fold upon PEG addition. HA compaction induced by PEG may underlie the changes in the plasma membrane properties and resealing of mechanical injuries induced by Pluronics.

Bioinspired thermoresponsive polymeric materials with tunable phase-transition behaviors are highly desirable for biomedical applications. Here, we reported a facile approach for the synthesis of both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) types of thermoresponsive polypeptoids with tunable phase-transition temperature in the range of 29--55 °C. The introduction of alkyl groups and ethylene glycol (EG) units results in a controlled phase-transition behavior under fairly mild conditions. A very sharp transition (ΔT ≤ 1.5 °C) is observed by simply adjusting pH and the alkyl chain length. In particular, the carboxyl-containing polypeptoids display designable UCST behavior, which can be finely tuned in both water and methanol. All these features make the obtained polymers beneficial for practical applications. More interestingly, we demonstrate that the hydrophilic EG group behaves as an excellent regulator to tune the UCST behavior, while the hydrophobic alkyl residues show remarkable capability to regulate the LCST behavior of the system. We hope that such systematic structure-property studies will enable the design of smart polymer materials to meet the specific needs of future applications.

For the simultaneous delivery of antisense oligonucleotides and their effector enzymes into cells, nanosized vesicular polyion complexes (PICs) were fabricated from oppositely charged polyion-pairs of oligonucleotides and poly(ethylene glycol) (PEG)-b-polypeptides. First, the polyion component structures were carefully designed to facilitate multimolecular (or secondary) association of unit PICs for non-covalent (or chemical crosslinking-free) stabilization of vesicular PICs. Chemically modified, single-stranded oligonucleotides (SSOs) dramatically stabilized the multimolecular associates under physiological conditions, compared to control SSOs without chemical modifications and duplex oligonucleotides. In addition, a high degree of guanidino groups in the polypeptide segment was also crucial for the high stability of multimolecular associates. Dynamic light scattering and transmission electron microscopy revealed the stabilized multimolecular associates to have a 100 nm-sized vesicular architecture with a narrow size distribution. The loading number of SSOs per nanovesicle was determined to be ~2,500 by using fluorescence correlation spectroscopic analyses with fluorescently labeled SSOs. Furthermore, the nanovesicle stably encapsulated ribonuclease H (RNase H) as an effector enzyme at ~10 per nanovesicle through simple vortex-mixing with preformed nanovesicles. Ultimately, the RNase H-encapsulated nanovesicle efficiently delivered SSOs with RNase H into cultured cancer cells, thereby eliciting the significantly higher gene knockdown compared with empty nanovesicles (without RNase H) or a mixture of nanovesicles with RNase H without encapsulation. These results demonstrate the great potential of non-covalently stabilized nanovesicles for the codelivery of two varying biomacromolecule payloads for ensuring their cooperative biological activity.

Acceleration of gelation in the biological environment and improvement of overall biological properties of a hydrogel is of enormous importance. Biopolymer stabilized gold (Au) nanoparticles (NPs) exhibit cytocompatibility and therapeutic activity. Hence, in situ gelation and subsequent improvement in the property of a hydrogel by employing Au NPs is an attractive approach. We report that stable Au NPs accelerate the conventional nucleophilic substitution reaction of activated halide-terminated poly(ethylene glycol) and tertiary amine functional macromolecules, leading to the rapid formation of injectable nanocomposite hydrogels in vivo and ex vivo with improved modulus, cell adhesion, cell proliferation, and cytocompatibility than that of a pristine hydrogel. NP surfaces with low chain grafting density and good colloidal stability are crucial requirements for the use of these NPs in the hydrogel formation. Influence of the structure of the amine functional prepolymer, the spacer connecting the halide leaving groups of the substrate, and the structure of the stabilizer on the rate promoting activity of the NPs have been evaluated with model low-molecular-weight substrates and macromolecules by 1H NMR spectroscopy, rheological experiments, and density functional theory. Results indicate a significant effect of the spacer connecting the halide leaving group with the macromolecule. The Au nanocomposite hydrogels show sustained co-release of methotrexate, an anti-rheumatic drug, and the Au NPs. This work provides insights for designing an injectable nanocomposite hydrogel system with multifunctional property. The strategy of the use of cytocompatible Au NPs as a promoter provides new opportunity to obtain an injectable hydrogel system for biological applications.

The formation and rheological properties of hydrogels based on amphiphilic ABA triblock polyether copolymers are described, relying solely on the hydrophobic interaction of long-chain alkyl glycidyl ether (AlkGE)- based A-blocks that are combined with a hydrophilic poly(ethylene glycol) (PEG) midblock. Via anionic ring-opening copolymerization (AROP), ethylene oxide (EO) and long-chain alkyl glycidyl ethers (AlkGEs) were copolymerized, using deprotonated poly(ethylene glycol) (PEG) macroinitiators (Mn of 10, 20 kg mol-1). The polymerization afforded amphiphilic ABA triblock copolymers with molar masses in the range of 21-32 kg mol-1 and dispersities (Đ) of Đ = 1.07-1.17. Kinetic studies revealed random copolymerization of EO and AlkGE, indicating random spacing of the hydrophobic AlkGE units by polar EO units. Following this approach, the hydrophobicity of the apolar blocks of amphiphilic ABA triblock polyethers can be tailored. Detailed rheological measurements confirmed the successful formation of hydrogels at different pH values as a consequence of nonpolar interactions and alkyl chain crystallization. Hydrogel formation was also observed at different ionic strengths (i.e., varied salt concentration), based on the hydrophobic aggregates. This behavior is in contrast to other often-used supramolecular cross-linking strategies, such as Coulomb interactions, complexation, or hydrogen bonding. Micro-differential scanning calorimetry (μ-DSC) measurements of the hydrogels revealed crystalline hydrophobic domains with melting temperatures in the physiological temperature range. In 3-[4,5-dimethylthiazol-2-yl]-2,5-diphenyltetrazoliumbromide (MTT) assays, diblock copolymers possessing structural analogy to the triblock copolymers were studied to assess the general cytotoxicity of amphiphilic polyethers bearing long alkyl chains at the polyether backbone, using splenic immune cells. At intermediate polymer concentrations, no cytotoxic effects were observed. This indicates that long-chain alkyl glycidyl ethers are promising for the introduction of highly hydrophobic as well as crystalline motifs at the polyether backbone in hydrogels for biomedical purposes.

The combination of cellulose nanocrystals (CNCs) and poly(ethylene glycol) methyl ether methacrylate (PEGMA) was evaluated to synthesize stable latexes by surfactant-free emulsion polymerization of methyl methacrylate (MMA). Cellulose-particle interaction was provided due to the dual role of PEGMA, acting as water-soluble comonomer with MMA under emulsion polymerization conditions and able to interact with CNCs, recovered from sulfuric acid hydrolysis (H2SO4-CNCs). After preliminary experiments designed to validate the affinity between CNCs and PEG-stabilized PMMA particles obtained by MMA/PEGMA emulsion copolymerization, the effect of the PEGMA content and molar mass and also of the content of CNCs on the kinetics of the polymerization and the stability of the latexes were investigated. The use of PEGMA300 (Mn = 300 g mol-1, 2-10 wt %) allowed the formation of a stable latex, however, with a broad particle size distribution and the presence of both small (ca. 25-50 nm) and large (ca. 425-650 nm) particles (at 10 wt %, Dn = 278 nm and Dw/Dn = 1.34). Increasing the molar mass of PEGMA (PEGMA950 or PEGMA2080) significantly increased the fraction of small particles. This was explained by the nucleation and growth of small polymer particles adsorbed at the CNCs' surface, resulting in a particular organization where the CNCs were covered by several polymer particles. The influence of the initial amount of CNCs in these systems was finally evidenced, the polymerization being faster as the content of CNCs increased, but only the latexes prepared with 2 and 5 wt % of CNCs were stable.

Lanthanide-doped upconversion nanoparticles (UCNPs) display highly beneficial photophysical features for background-free bioimaging and bioanalysis; however, they are instable in high ionic strength buffers, have no functional groups, and are nonspecifically interacting. Here, we have prepared NIR-excitable UCNPs that are long-term colloidally stable in buffered media and possess functional groups. Heterobifunctional poly(ethylene glycol) (PEG) linkers bearing neridronate and alkyne or maleimide were attached to UCNPs via a ligand exchange. Streptavidin (SA)-conjugates were prepared by click reaction of UCNP@PEG-alkyne and SA-azide. Antihuman serum albumin pAbF antibody was modified with azide groups and conjugated to UCNP@PEG-alkyne via click reaction; alternatively, the antibody, after mild reduction of its disulfide bonds, was conjugated to UCNP@PEG-maleimide. We employed these nanoconjugates as labels for an upconversion-linked immunosorbent assay. SA-based labels achieved the lowest LOD of 0.17 ng/mL for the target albumin, which was superior compared to a fluorescence immunoassay (LOD 0.59 ng/mL) or an enzyme-linked immunoassay (LOD 0.56 ng/mL).

We describe the synthesis of hydrophilic poly(poly(ethylene glycol) methyl ether methacrylate) (PmPEGMA) and hydrophobic poly(methyl methacrylate) (PMMA) caspofungin conjugates by a post-polymerization modification of copolymers containing 10 mol % pentafluorophenyl methacrylate (PFPMA), which were obtained via reversible addition-fragmentation chain transfer copolymerization. The coupling of the clinically used antifungal caspofungin was confirmed and quantified in detail by a combination of 1H-, 19F- and diffusion-ordered NMR spectroscopy, UV-vis spectroscopy, and size exclusion chromatography. The trifunctional amine-containing antifungal was attached via several amide bonds to the hydrophobic PMMA, but sterical hindrance induced by the mPEGMA side chains prohibited intramolecular double functionalization. Both polymer-drug conjugates revealed activity against important human-pathogenic fungi, that is, two strains of Aspergillus fumigatus and one strain of Candida albicans (2.5 mg L-1 < MEC < 8 mg L-1, MIC50 = 4 mg L-1), whereas RAW 264.7 macrophages as well as HeLa cells remained unaffected at these concentrations.

Hydrogels have a wide range of applications in the fields of biomedicine, flexible electronics, and bionics. In this study, injectable and self-healable hydrogels were first prepared based on a dynamic covalent C═C bond formed via the Knoevenagel condensation reaction between poly(ethylene glycol) dicyanoacetate and water-soluble poly(vanillin acrylate). Three kinds of catalysts (phosphate buffer, zeolitic imidazolate framework-8, and tertiary amine) were used in Knoevenagel condensation for preparing hydrogels. All hydrogels in this study could be formed in situ, and their gelation time ranged from seconds to minutes. The properties and application of hydrogels could be customized according to the type of catalyst employed. 3-[4,5-Dimethylthiazol-2-yl]-2,5-diphenyltetrazolium bromide (MTT) results indicated that all the components and hydrogels exhibited low toxicity, and the hydrogels could be used as 3D cell culture scaffolds. Because of the dynamic covalent C═C bond formed by Knoevenagel condensation, the resultant hydrogels were found to be dynamic and showed good self-healing properties. This work presents a new dynamic covalent chemistry for the preparation of self-healable materials.

We report here the synthesis of a series of ethylene glycol-based triblock copolymers containing a hydrophilic middle segment of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and two temperature-responsive segments of diethylene glycol methyl ether methacrylate (DEGMA) at both ends via the reversible addition-fragmentation chain-transfer (RAFT) polymerization. While the corresponding temperature-responsive homopolymer (PDEGMA) and the diblock copolymer (PDEGMA-b-PPEGMA) could not form a gel, the triblock copolymers (PDEGMA-b-PPEGMA-b-PDEGMA) could form a physical gel at certain concentrations and at temperatures above the lower critical solution temperature (LCST). This sol-gel transition is fully reversible and can be repeated several times. Depending on the chain length of the middle block and two end blocks, a physical gel could be formed at a minimum polymer concentration of 5 wt %. In addition, a mechanically strong gel could be easily formed within 5 s at the maximum concentration of 20 wt % and at a temperature of 37 °C. Considering the good cell compatibility and soft rubbery nature of the triblock copolymers, they can potentially be used as injectable scaffold for cell culture and tissue engineering applications.

Preparation of polysaccharide-based block copolymers with linear architectures is an important goal, opening up clear application potential and requiring significant advances in polysaccharide regio- and chemoselectivity. Herein we report a simple approach to prepare dextran-based block copolymers. Reaction with N-bromosuccinimide (NBS)/triphenyl phosphine (PPh3) regioselectively brominates the sole primary alcohol of linear, unbranched dextran at C-6 of the nonreducing end monosaccharide. The resulting dextran, monofunctionalized with a terminal C-6 bromide, was coupled with various amine terminated polymers to prepare block copolymers, including dextran-b-poly(ethylene glycol), dextran-b-polystyrene, and dextran-b-poly(N-isopropylacrylamide). These renewable-based block copolymers, prepared in two selective, high-yielding steps from native linear dextran, exhibit various interesting properties. Dextran-b-poly(N-isopropylacrylamide) undergoes thermally induced micellization as revealed by dynamic light scattering (DLS), forming micelles upon exceeding 33 °C. We also observed microphase separation in dextran-b-polystyrene by using small-angle X-ray scattering (SAXS). Overall, this methodology provides a new, highly chemo- and regioselective, versatile route to diverse dextran-based block copolymers with useful properties, enabling drug delivery, compatibilization, and other applications.

We show ionically cross-linked, temperature-responsive reversible or irreversible hydrogels of anionic cellulose nanocrystals (CNCs) and methacrylate terpolymers by mixing them homogeneously in the initially charge-neutral state of the polymer, which was subsequently switched to be cationic by cleaving side groups by UV irradiation. The polymer is a random terpolymer poly(di(ethylene glycol) methyl ether methacrylate)-rnd-poly(oligo(ethylene glycol) methyl ether methacrylate)-rnd-poly(2-((2-nitrobenzyl)oxycarbonyl)aminoethyl methacrylate), that is, PDEGMA-rnd-POEGMA-rnd-PNBOCAEMA. The PDEGMA and POEGMA repeating units lead to a lower critical solution temperature (LCST) behavior. Initially, homogeneous aqueous mixtures are obtained with CNCs, and no gelation is observed even upon heating to 60 °C. However, upon UV irradiation, the NBOCAEMAs are transformed to cationic 2-aminoethyl methacrylate (AEMA) groups, as 2-nitrobenzaldehyde moieties are cleaved. The resulting mixtures of anionic CNC and cationic PDEGMA-rnd-POEGMA-rnd-PAEMA show gelation for sufficiently high polymer fractions upon heating to 60 °C due to the interplay of ionic interactions and LCST. For short heating times, the gelation is thermoreversible, whereas for long enough heating times, irreversible gels can be obtained, indicating importance of kinetic aspects. The ionic nature of the cross-linking is directly shown by adding NaCl, which leads to gel melting. In conclusion, the optical triggering of the polymer ionic interactions in combination with its LCST phase behavior allows a new way for ionic nanocellulose hydrogel assemblies.

Bacteriophages (phages, bacteria-specific viruses) have biotechnological and therapeutic potential. To apply phages as pure or heterogeneous mixtures, it is essential to have a robust mechanism for transport and storage, with different phages having very different stability profiles across storage conditions. For many biologics, cryopreservation is employed for long-term storage and cryoprotectants are essential to mitigate cold-induced damage. Here, we report that poly(ethylene glycol) can be used to protect phages from cold damage, functioning at just 10 mg·mL-1 (∼1 wt %) and outperforms glycerol in many cases, which is a currently used cryoprotectant. Protection is afforded at both -20 and -80 °C, the two most common temperatures for frozen storage in laboratory settings. Crucially, the concentration of the polymer required leads to frozen solutions at -20 °C, unlike 50% glycerol (which results in liquid solutions). Post-thaw recoveries close to 100% plaque-forming units were achieved even after 2 weeks of storage with this method and kill assays against their bacterial host confirmed the lytic function of the phages. Initial experiments with other hydrophilic polymers also showed cryoprotection, but at this stage, the exact mechanism of this protection cannot be concluded but does show that water-soluble polymers offer an alternative tool for phage storage. Ice recrystallization inhibiting polymers (poly(vinyl alcohol)) were found to provide no additional protection, in contrast to their ability to protect proteins and microorganisms which are damaged by recrystallization. PEG's low cost, solubility, well-established low toxicity/immunogenicity, and that it is fit for human consumption at the concentrations used make it ideal to help translate new approaches for phage therapy.

Implementation of hydrogel precursors in two-photon polymerization (2PP) technology provides promising opportunities in the tissue engineering field thanks to their soft characteristics and similarity to extracellular matrix. Most of the hydrogels, however, are prone to post-fabrication deformations, leading to a mismatch between the computer-aided design and the printed structure. In the present work, we have developed novel synthetic hydrogel precursors to overcome the limitations associated with 2PP processing of conventional hydrogel precursors such as post-processing deformations and a narrow processing window. The precursors are based on a poly(ethylene glycol) backbone containing urethane linkers and are, on average, functionalized with six acrylate terminal groups (three on each terminal group). As a benchmark material, we exploited a precursor with an identical backbone and urethane linkers, albeit functionalized with two acrylate groups, that were reported as state-of-the-art. An in-depth characterization of the hexafunctional precursors revealed a reduced swelling ratio (36 MPa Young's modulus) compared to their difunctional analogs. The superior physical properties of the newly developed hydrogels lead to 2PP-based fabrication of stable microstructures with excellent shape fidelity at laser scanning speeds up to at least 90 mm s-1, in contrast with the distorted structures of conventional difunctional precursors. The hydrogel films and microscaffolds revealed a good cell interactivity after functionalization of their surface with a gelatin methacrylamide-based coating. The proposed synthesis strategy provides a one-pot and scalable synthesis of hydrogel building blocks that can overcome the current limitations associated with 2PP fabrication of hydrogel microstructures

Systemic enzyme-prodrug therapy (EPT) using nanofactories, nanoparticles encapsulating prodrug-activating enzymes, is a promising concept for anticancer therapy. However, systemic delivery systems can be problematic. As nanofactories are typically carried by the blood circulation to tissues throughout the body, conversion of anticancer drugs in normal tissues can cause severe side effects. To overcome this problem, we developed a novel focal EPT approach utilizing nanocomposite hydrogels composed of a poly(dl-lactide-co-glycolide)-b-poly(ethylene glycol)-b-poly(dl-lactide-co-glycolide) (PLGA-PEG-PLGA) copolymer, LAPONITE, and β-galactosidase (β-gal). The nanocomposite gels can be easily injected locally, and the inherent enzyme activity of β-gal can be preserved long-term. Prodrug 5-FU-β-gal readily permeated into the interior space of gels and was converted into the active anticancer drug 5-FU. Importantly, a single local injection of nanocomposite gels and prodrug 5-FU-β-gal provided long-lasting antitumor activity in vivo without observable side effects, demonstrating the potential utility of injectable biocatalytic hydrogel factories for novel focal EPT systems.

In this work, we establish a quantitative correlation between molecular release and material degradation. We characterize a radical-initiated photopolymerized hydrogel and base-initiated Michael addition-polymerized hydrogel, which form gels through distinct crosslinking reactions. Both scaffolds use the same degradable peptide crosslinker, which enables them to be degraded through the same enzymatic degradation reaction. A fluorescently labeled poly(ethylene glycol) molecule is chemically conjugated into the scaffold and is released during enzymatic degradation. Real-time changes in scaffold rheological properties during degradation are measured using bulk rheology. Molecular release is measured by quantifying the change in fluorescence in the incubation liquid and the hydrogel scaffold. A complicating factor, previously described in the literature, is that shear may cause increased crosslinking, resulting in an increase in the storage modulus after initiation of degradation, which changes release profiles by limiting the initial release of molecules. Therefore, we also test the hypothesis that shear induces additional crosslinking in degrading hydrogel scaffolds. To determine whether shear changes rheological properties during scaffold degradation, enzymatic degradation is characterized using bulk rheology as materials undergo continuous or minimal shear. To determine the effect of shear on molecular release, shear is induced by shaking the material during incubation. Release is characterized from scaffolds that are incubated with continuous or without shaking. We determine that shear does not make a difference in scaffold degradation or release regardless of the gelation reaction. Instead, we determine that the type of hydrogel crosslinking reaction greatly affects both material degradation and molecular release. A hydrogel crosslinking by base-initiated Michael addition does undergo further crosslinking at the start of degradation. We correlate release with enzymatic degradation for both scaffolds. We determine that the material storage modulus is indirectly correlated with release during degradation. These results indicate that rheological characterization is a useful tool to characterize and predict the release of molecules from degrading hydrogels.

A new strategy has been developed to synthesize deep eutectic solvent (DES)-based lignin eutectogels by the chemical crosslinking of homogeneously dispersed lignin with poly(ethylene glycol)diglycidyl ether (PEGDE) in a ternary DES of choline chloride (ChCl)/urea/glycerol. The as-prepared lignin eutectogels have high ionic conductivity, high strength, and extreme temperature stability, which can be used as sensors for flexible electronics. N-doped hierarchical porous carbons (HPCs) are prepared when the eutectogels were solvent-replaced and sintered in the atmosphere of N2 and CO2, which results in the formation of porous carbon with a sufficient specific surface area and a three-dimensional framework composed of a hierarchical porous structure. They were used as electrodes with excellent capacitance performance attributed to the synergy of reasonable pore size distribution and excellent nitrogen doping efficiency. The electrode displayed a significantly enhanced specific capacitance (270 F g-1 at a current density of 1.0 A g-1 in a three-electrode system and 224 F g-1 at 0.5 A g-1 in a two-electrode system) and high-performance stability (7% capacitance loss over 10,000 cycles at 8 A g-1) as a supercapacitor electrode. It indicates the great promise of the lignin eutectogels for both sensing and energy storage applications.