Search

Miktoarm star polymers exhibit a captivating range of physicochemical properties, setting them apart from their linear counterparts. This study devised a synthetic pathway to synthesize cationic miktoarm stars utilizing polypept(o)ides (PeptoMiktoStars), comprising 3 or 6 polysarcosine (pSar) arms (AB 3×100 , AB 6×50 , overall 300) for shielding and a cross-linkable poly( S -ethylsulfonyl-l-homocysteine) (pHcy(SO 2 Et) 20 ) block and a poly(l-lysine) ((pLys) 20 ) block for nucleic acid complexation. Precise control over the DP n and narrow molecular weight distributions ( D̵ ≈ 1.2) were achieved for both structures. Both PeptoMiktoStars efficiently complexed mRNA and pDNA into polyion complex micelles (PICMs). AB 6 -PICMs provided modest (mRNA) to high (pDNA) stability against glutathione and heparin sulfate (HS), while even cross-linked AB 3 -PICMs were susceptible to HS. All PICMs delivered pDNA and mRNA into D1 cells (over 80%) and Jurkat T cells (over 50%) in vitro. Despite payload- and cell-dependency, AB 3 showed overall higher transfection efficiency, while AB 6 demonstrated better shielding and enhanced stability.

Core cross-linked polymeric micelles (CCPMs) are designed to improve the therapeutic profile of hydrophobic drugs, reduce or completely avoid protein corona formation, and offer prolonged circulation times, a prerequisite for passive or active targeting. In this study, we tuned the CCPM stability by using bifunctional or trifunctional cross-linkers and varying the cross-linkable polymer block length. For CCPMs, amphiphilic thiol-reactive polypept(o)ides of polysarcosine- block -poly( S -ethylsulfonyl-l-cysteine) [pSar- b -pCys(SO 2 Et)] were employed. While the pCys(SO 2 Et) chain lengths varied from X n = 17 to 30, bivalent (derivatives of dihydrolipoic acid) and trivalent (sarcosine/cysteine pentapeptide) cross-linkers have been applied. Asymmetrical flow field-flow fraction (AF4) displayed the absence of aggregates in human plasma, yet for non-cross-linked PM and CCPMs cross-linked with dihydrolipoic acid at [pCys(SO 2 Et)] 17 , increasing the cross-linking density or the pCys(SO 2 Et) chain lengths led to stable CCPMs. Interestingly, circulation time and biodistribution in mice of non-cross-linked and bivalently cross-linked CCPMs are comparable, while the trivalent peptide cross-linkers enhance the circulation half-life from 11 to 19 h.

Secondary structure formation differentiates polypeptides from most of the other synthetic polymers, and the transitions from random coils to rod-like α-helices or β-sheets represent an additional parameter to direct self-assembly and the morphology of nanostructures. We investigated the influence of distinct secondary structures on the self-assembly of reactive amphiphilic polypept(o)ides. The individual morphologies can be preserved by core cross-linking via chemoselective disulfide bond formation. A series of thiol-responsive copolymers of racemic polysarcosine- block -poly( S -ethylsulfonyl-dl-cysteine) (pSar- b -p(dl)Cys), enantiopure polysarcosine- block -poly( S -ethylsulfonyl-l-cysteine) (pSar- b -p(l)Cys), and polysarcosine- block -poly( S -ethylsulfonyl-l-homocysteine) (pSar- b -p(l)Hcy) was prepared by N -carboxyanhydride polymerization. The secondary structure of the peptide segment varies from α-helices (pSar- b -p(l)Hcy) to antiparallel β-sheets (pSar- b -p(l)Cys) and disrupted β-sheets (pSar- b -p(dl)Cys). When subjected to nanoprecipitation, copolymers with antiparallel β-sheets display the strongest tendency to self-assemble, whereas disrupted β-sheets hardly induce aggregation. This translates to worm-like micelles, solely spherical micelles, or ellipsoidal structures, as analyzed by atomic force microscopy and cryogenic transmission electron microscopy, which underlines the potential of secondary structure-driven self-assembly of synthetic polypeptides.

The size control of nanomedicines for tumor diagnosis and therapy is of high importance, since it enables or disables deep and sufficient tumor penetration. Amphiphilic star-shaped block copolypept(o)ides offer substantial promise to precisely adjust the hydrophobic core and the hydrophilic corona, independent of each other, and therefore simultaneously control the size dimension in the interesting size range from 10 to 30 nm. To gain access to core-shell structures of such sizes, 3-arm and 6-arm PeptoStars, based on poly(γ- tert-butyloxycarbonyl-l-glutamate)- b-polysarcosine (pGlu(O tBu)- b-pSar), were prepared via controlled living ring-opening polymerization (ROP) of the corresponding N-carboxyanhydrides. Moreover, size exclusion chromatography (SEC) proves the presence of well-defined star shaped polymers with molecular weights from 38 to 88 kg/mol with low polymer dispersities of 1.16 to 1.23. By varying the α-helical peptide core and maintain a constant polysarcosine corona, hydrodynamic size analyses revealed the importance of using a sufficiently large and dense hydrophilic shielding corona to prevent aggregation of the hydrophobic core and obtain uniform-sized spherical-shaped particles with hydrodynamic diameters below 24 nm. Fluorescence correlation spectroscopy (FCS) additionally demonstrates the absence of protein adsorption in human plasma for 6-arm polypept(o)ide stars and thus confirms polysarcosine as stealthlike material.

Prevention of biofouling and microbial contamination of implanted biomedical devices is essential to maintain their functionality and biocompatibility. For this purpose, polypept(o)ide block copolymers have been developed, in which a protein-resistant polysarcosine (pSar) block is combined with a dopamine-modified poly(glutamic acid) block for surface coating and silver nanoparticles (Ag NPs) formation. In the development of a novel, versatile, and biocompatible antibacterial surface coating, block lengths pSar were varied to derive structure-property relationships. Notably, the catechol moiety performs two important tasks in parallel; primarily it acts as an efficient anchoring group to metal oxide surfaces, while it furthermore induces the formation of Ag NPs. Attributing to the dual function of catechol moieties, antifouling pSar brush and antimicrobial Ag NPs can not only adhere stably on metal oxide surfaces, but also display passive antifouling and active antimicrobial activity, showing good biocompatibility simultaneously. The developed strategy seems to provide a promising platform for functional modification of biomaterials surface to preserve their performance while reducing the risk of bacterial infections.

We report the synthesis of polysarcosine-block-polyglutamic acid benzylester (PSar-block-PGlu(OBn)) and polysarcosine-block-polylysine-ε-N-benzyloxycarbonyl (PSar-block-PLys(Z)) copolymers. The novel polypeptoid-block-polypeptide copolymers (Copolypept(o)ides) have been synthesized by ring-opening polymerization (ROP) of N-carboxyanhydrides (NCAs). Polymerization conditions were optimized regarding protecting groups, block sequence and length. While the degree of polymerization of the PSar block length was set to be around 200 or 400, PGlu(OBn) and PLys(Z) block lengths were varied between 20 to 75. The obtained block copolymers had a total degree of polymerization of 220-475 and dispersity indices between 1.1 and 1.2. Having ensured a nontoxic behavior up to a concentration of 3 mg/mL in HEK293 cells, the novel block copolymers have been applied to the synthesis of organic colloids (by miniemulsion polymerization and miniemulsion solvent evaporation process). Colloids of around 100 nm (miniemulsion polymerization) to 200 nm (miniemulsion process) have been prepared. Additionally, PSar-block-PGlu(OBn) copolymers have been used in a drug formulation of an adenylate cyclase inhibitor. Micelles of 28.0 nm (without drug) and 33.0 nm (with drug) diameter have been observed by fluorescence correlation spectroscopy (FCS). The polypeptoid-block-polypeptide formulation increased solubility of the drug and enhances its bioavailability, which leads to a reduction of intracellular cAMP levels in MaMel 91 melanoma cells.

In this work we describe the application of amphiphilic N-(2-hydroxypropyl)methacrylamide (HPMA)-based copolymers as polymeric surfactants in miniemulsion techniques. HPMA-based copolymers with different ratios of HPMA (hydrophilic) to laurylmethacrylate (LMA; hydrophobic) units were synthesized by RAFT polymerization and postpolymerization modification. The amphiphilic polymers can act as detergents in both the miniemulsion polymerization of styrene and the miniemulsion process in combination with solvent evaporation, which was applied to polystyrene and polylactide. Under optimized conditions, monodisperse colloids can be prepared. The most promising results could be obtained by using the block copolymer with a ratio of 90/10. Preliminary cell uptake studies showed that polymer-stabilized nanoparticles have only minor unspecific cellular internalization in HeLa cells. Furthermore, cytotoxicity assays showed no particle-attributed toxicity. In addition, the copolymer-stabilized particles preserved the shape and size in human blood serum as demonstrated by dynamic light scattering.

In this article we report the synthesis and in vitro evaluation of well-defined, folate functionalized and fluorescently labeled polymers based on the clinically approved N-(2-hydroxypropyl)-methacrylamide (HPMA). The polymers were prepared applying the RAFT polymerization method as well as the reactive ester approach. The molecular weights of the polymers synthesized were around 15 and 30 kDa. The total content of conjugated folate varied from 0, 5, and 10 mol %. The cellular uptake of these polymers was investigated in the folate receptor (FR)-positive human nasopharyngeal epidermal carcinoma (KB-3-1) and FR-negative human lung epithelial carcinoma (A549) cancer cell lines. In FR-positive cells, the cellular uptake of polymers depended strongly on the folate content. The conjugates with the highest folate content led to the highest level of cell-associated fluorescence. Regarding influence of molecular weight, nonsignificant differences were observed when total cell uptake was analyzed. The cellular uptake is related to the aggregate formation of the polymer conjugates, which were studied by fluorescence correlation spectroscopy (FCS). For the conjugates, we found aggregates with a diameter ranging from 11-18 nm. Much to our surprise, we found aggregates of the same size for the 30 kDa polymer bearing 5 mol % folate and for the 15 and 30 kDa conjugates with a folate content of 10 mol %. Consequently, a different conformation in solution for the different conjugates was expected. By live cell confocal fluorescence microscopy the receptor-mediated endocytosis process was observed, as colocalization with lysosomal markers was achieved. In addition, cellular uptake was not observed in FR-negative cells (A549) and can be dramatically reduced by blocking the FR with free folic acid. Our findings clearly underline the need for a minimum amount of accessible folate units to target the FR that triggers specific cellular uptake. Furthermore, it has been demonstrated that the targeting vector itself strongly influences the aggregation behavior in solution and thus determines the interaction with cells regarding cellular uptake as well as intracellular localization.

During the last decades polymer-based nanomedicine has turned out to be a promising tool in modern pharmaceutics. The following article describes the synthesis of well-defined random and block copolymers by RAFT polymerization with potential medical application. The polymers have been labeled with the positron-emitting nuclide fluorine-18. The polymeric structures are based on the biocompatible N-(2-hydroxypropyl)-methacrylamide (HPMA). To achieve these structures, functional reactive ester polymers with a molecular weight within the range of 25,000-110,000 g/mol were aminolyzed by 2-hydroxypropylamine and tyramine (3%) to form (18)F-labelable HPMA-polymer precursors. The labeling procedure of the phenolic tyramine moieties via the secondary labeling synthon 2-[(18)F]fluoroethyl-1-tosylate ([(18)F]FETos) provided radiochemical fluoroalkylation yields of ∼80% for block copolymers and >50% for random polymer architectures within a synthesis time of 10 min and a reaction temperature of 120 °C. Total synthesis time including synthon synthesis, (18)F-labeling, and final purification via size exclusion chromatography took less than 90 min and yielded stable (18)F-labeled HPMA structures in isotonic buffer solution. Any decomposition could be detected within 2 h. To determine the in vivo fate of (18)F-labeled HPMA polymers, preliminary small animal positron emission tomography (PET) experiments were performed in healthy rats, demonstrating the renal clearance of low molecular weight polymers. Furthermore, low metabolism rates could be detected in urine as well as in the blood. Thus, we expect this new strategy for radioactive labeling of polymers as a promising approach for in vivo PET studies.