Search

It is demonstrated that the molecular solubility of softwood hemicelluloses is significantly influenced by pretreatment of the fibers, extraction, and downstream processing. To quantify these effects, four hemicellulose samples were extracted from different thermomechanical pulps of Norway spruce. The molecular solubility of the samples was characterized by size and molar mass distributions, and the morphology of the molecules was studied using high resolution microscopy techniques. All extracted samples were well dispersed in aqueous media creating transparent dispersions, but dynamic light scattering measurements showed that molecular solubility can only be achieved using specific pretreatments and extractions. The procedure yields acetylated galactoglucomannan (AcGGM)-rich hemicelluloses with an average molar mass of 21-35 kDa and a diameter up to 10 nm but also shows that water is a poor solvent for this sample since an association is detected as soon as the concentration is about 20 g/L. These associated hemicellulose dispersions are still absolutely clear on visual inspection, underlining the need for careful measurement when assessing the solubility of wood hemicelluloses.

Interest in xylan-rich hemicelluloses (XH) film is growing, and efforts have been made to prepare XH films with improved mechanical properties. This work described an effective approach to produce nanocomposite films with enhanced mechanical properties by incorporation of cellulose nanofibers (CNFs) into XH. Aqueous dispersions of XH (64-75 wt %), sorbitol (16-25 wt %), and CNF (0-20 wt %) were cast at a temperature of 23 °C and 50% relative humidity. The surface morphology of the films was revealed by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The thermal properties and crystal structure of the films were evaluated by thermal analysis (TG) and X-ray diffraction (XRD). The surface of XH films with and without CNF was composed primarily of nanonodules, and CNFs were embedded in the XH matrix. Freeze-dried XH powder was amorphous, whereas the films with and without CNF showed a distinct peak at around 2θ = 18°, which suggested that XH molecules aggregated or reordered in the casting solution or during water evaporation. Furthermore, the nanocomposite films had improved thermal stability. XH film with 25 wt % plasticizer (sorbitol, based on dry XH weight) showed poor mechanical properties, whereas incorporation of CNF (5-20 wt %, based on the total dry mixture) into the film resulted in enhanced mechanical properties due to the high aspect ratio and mechanical strength of CNF and strong interactions between CNF and XH matrix. This effective method makes it possible to produce hemicellulose-based biomaterials of high quality.

Generation of bioenergy, new functional polymers, or chemicals and biomaterials from hemicelluloses are important uses for biomass. In this paper, a novel functional biopolymer with carbon-carbon double bond and carboxyl groups was prepared by a homogeneous esterification of xylan-rich hemicelluloses (XH) with maleic anhydride in 1-butyl-3-methylimidazolium chloride ([BMIM]Cl) ionic liquid using LiOH as catalyst. The biopolymers with degrees of substitution (DS) between 0.095 and 0.75 were accessible in a completely homogeneous system by changing reaction temperature, reaction time, the dosage of catalyst, and the molar ratio of maleic anhydride to anhydroxylose unit in XH. Results obtained from FT-IR and (13)C NMR spectroscopies confirmed the structure of hemicellulosic derivatives with carbon-carbon double bond and carboxyl groups, implying an efficient method to prepare a novel and important functional biopolymer for biomaterials.

The molar mass parameters for arabino-4-O-methylglucuronoxylans, arabinohexenuronoxylans, 4-O-methylglucuronoxylans, hexenuronoxylans, and galactoglucomannans extracted from wood and pulps have been determined. To characterize different types of hemicelluloses, delignified wood (spruce, pine, larch, aspen, and birch) and chemical pulps (unbleached and totally chlorine-free bleached) were extracted with dimethyl sulfoxide (DMSO) or alkaline aqueous solutions. Size exclusion chromatography (SEC) with off-line matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-MS) were employed to characterize the molar masses. The hemicellulose extracts were separated by SEC into fractions each containing components with a narrow range of molar masses and the average molar mass of each fraction subsequently determined by MALDI-MS. The molar mass parameters for the hemicelluloses were then calculated on the basis of the SEC distribution curves and MALDI-MS spectra. As expected, in most cases the hemicelluloses extracted from wood (holocellulose) exhibited higher molar masses than did the corresponding hemicelluloses from chemical pulps. The molar mass parameters for hemicelluloses isolated from pulps derived from cooking samples of the same batch of softwood chips decreased in the following order: ASAM pulp > MSSAQ pulp > kraft pulp. The lowest molar masses were demonstrated by the glucuronoxylans extracted from pulps obtained by cooking with acidic sulfite. The xylans from bleached kraft pulp were characterized by molar masses that were only slightly lower than those of the corresponding xylans from unbleached pulp. The xylans extracted into DMSO exhibited somewhat lower molar masses than did the corresponding xylans extracted into alkaline aqueous solutions. In all cases the range of molar masses demonstrated by the hemicelluloses investigated was found to be rather narrow, i.e., the polydispersity index Mw/Mn was found to be approximately 1.1-1.4.