Search

A key problem for biological motor control is to establish a link between an idea of a movement and the generation of a set of muscle-stimulating signals that lead to the movement execution. The number of signals to generate is thereby larger than the body's mechanical degrees of freedom in which the idea of the movement may be easily expressed, as the movement is actually executed in this space. A mathematical formulation that provides a solving link is presented in this paper in the form of a layered, hierarchical control architecture. It is meant to synthesise a wide range of complex three-dimensional muscle-driven movements. The control architecture consists of a 'conceptional layer', where the movement is planned, a 'structural layer', where the muscles are stimulated, and between both an additional 'transformational layer', where the muscle-joint redundancy is resolved. We demonstrate the operativeness by simulating human stance and squatting in a three-dimensional digital human model (DHM). The DHM considers 20 angular DoFs and 36 Hill-type muscle–tendon units (MTUs) and is exposed to gravity, while its feet contact the ground via reversible stick–slip interactions. The control architecture continuously stimulates all MTUs ('structural layer') based on a high-level, torque-based task formulation within its 'conceptional layer'. Desired states of joint angles (postural plan) are fed to two mid-level joint controllers in the 'transformational layer'. The 'transformational layer' communicates with the biophysical structures in the 'structural layer' by providing direct MTU stimulation contributions and further input signals for low-level MTU controllers. Thereby, the redundancy of the MTU stimulations with respect to the joint angles is resolved, i.e. a link between plan and execution is established, by exploiting some properties of the biophysical structures modelled. The resulting joint torques generated by the MTUs via their moment arms are fed back to the conceptional layer, closing the high-level control loop. Within our mathematical formulations of the Jacobian matrix-based layer transformations, we identify the crucial information for the redundancy solution to be the muscle moment arms, the stiffness relations of muscle and tendon tissue within the muscle model, and the length–stimulation relation of the muscle activation dynamics. The present control architecture allows the straightforward feeding of conceptional movement task formulations to MTUs. With this approach, the problem of movement planning is eased, as solely the mechanical system has to be considered in the conceptional plan. [ABSTRACT FROM AUTHOR]

State-space control of myoelectric devices and real-time visualization of muscle forces in virtual rehabilitation require measuring or estimating muscle dynamic states: neuromuscular activation, tendon force and muscle length. This paper investigates whether regular (KF) and extended Kalman filters (eKF), derived directly from Hill-type muscle mechanics equations, can be used as real-time muscle state estimators for isometric contractions using raw electromyography signals (EMG) as the only available measurement. The estimators' amplitude error, computational cost, filtering lags and smoothness are compared with usual EMG-driven analysis, performed offline, by integrating the nonlinear Hill-type muscle model differential equations (offline simulations-OS). EMG activity of the three triceps surae components (soleus, gastrocnemius medialis and gastrocnemius lateralis), in three torque levels, was collected for ten subjects. The actualization interval (AI) between two updates of the KF and eKF was also varied. The results show that computational costs are significantly reduced (70x for KF and 17 $$\times $$ for eKF). The filtering lags presented sharp linear relationships with the AI (0-300 ms), depending on the state and activation level. Under maximum excitation, amplitude errors varied in the range 10-24% for activation, 5-8% for tendon force and 1.4-1.8% for muscle length, reducing linearly with the excitation level. Smoothness, measured by the ratio between the average standard variations of KF/eKF and OS estimations, was greatly reduced for activation but converged exponentially to 1 for the other states by increasing AI. Compared to regular KF, extended KF does not seem to improve estimation accuracy significantly. Depending on the particular application requirements, the most appropriate KF actualization interval can be selected. [ABSTRACT FROM AUTHOR]

A model is presented showing how peripheral factors may cause a process of movement adaptation that leads to task-specific focal hand dystonia in musicians (FHDM). To acquire a playing technique, the hand must find effective and physiologically sustainable movements within a complex set of functional demands and anatomic, ergonomic, and physiological constraints. In doing so, individually discriminating constraints may become effective, such as limited anatomic independence of finger muscles/tendons, limited joint ranges of motion, or (subclinical) neuromusculoskeletal defects. These factors may, depending on the instrument-specific playing requirements, compromise or exclude functional playing movements. The controller (i.e., the brain) then needs to develop alternative motions to execute the task, which is called compensation. We hypothesize that, if this compensation process does not converge to physiologically sustainable muscle activation patterns that satisfy all constraints, compensation could increase indefinitely under the pressure of practice. Dystonic symptoms would become manifest when overcompensation occurs, resulting in motor patterns that fail in proper task execution. The model presented in this paper only concerns the compensatory processes preceding such overcompensations and does not aim to explain the nature of the dystonic motions themselves. While the model considers normal learning processes in the development of compensations, neurological predispositions could facilitate developing overcompensations or further abnormal motor programs. The model predicts that if peripheral factors are involved, FHDM symptoms would be preceded by long-term gradual changes in playing movements, which could be validated by prospective studies. Furthermore, the model implies that treatment success might be enhanced by addressing the conflict between peripheral factors and playing tasks before decompensating/retraining the affected movements. [ABSTRACT FROM AUTHOR]

In this paper, the hypothesis that multijoint control strategies are transferred between similar tasks was tested. To test this hypothesis, we studied the take-off phase of two types of backward somersault dives: one while translating backwards (Back), the other while translating forward (Reverse). An experimentally based dynamic model of the musculoskeletal system was employed to simulate the measured kinematics and reaction force data and to study the sensitivity of take-off performance to initial kinematic conditions. It was found that the horizontal velocity of the total body center of mass (CM) was most sensitive to modifications in the initial shank conditions. Consequently, the initial shank kinematics of the Back dive was modified in the optimization procedure while maintaining the joint coordination of the Back in order to generate the CM trajectory and reaction forces of a Reverse. Similarly, the initial shank kinematics of the Reverse dive was modified to simulate the CM trajectory and reaction force of the Back. It was found that small modifications in the initial shank kinematics led to change in direction of horizontal CM velocity at take-off; resulting in a switch from Back to Reverse and vice versa. In both cases, the simulated momentum conditions at departure and the bimodal shape of the reaction force-time curve were consistent with those experimentally observed. The results of this study support the hypothesis that transfer of control strategies between similar tasks is a viable option in multijoint control. This transfer of control strategy is explained using a hierarchical model of the motion control system. [ABSTRACT FROM AUTHOR]

In this paper, we present a control method for achieving biped static balance under unknown periodic external forces whose periods are only known. In order to maintain static balance adaptively in an uncertain environment, it is essential to have information on the ground reaction forces. However, when the biped is exposed to a steady environment that provides an external force periodically, uncertain factors on the regularity with respect to a steady environment are gradually clarified using learning process, and finally a torque pattern for balancing motion is acquired. Consequently, static balance is maintained without feedback from ground reaction forces and achieved in a feedforward manner. [ABSTRACT FROM AUTHOR]

The dynamic characteristics of human upper extremities are usually expressed by mechanical impedance. Although many studies have discussed human impedance characteristics, there are no reports on control abilities of task-related impedance in skilled human hand movements. This paper proposes a virtual sports system using a virtual reality technique to examine human movements. The differences in movements between skilled and unskilled subjects are investigated through a series of experiments. Then, the human impedance of a skilled player is estimated and analyzed in the preliminary phase of motion. [ABSTRACT FROM AUTHOR]

Several strategies have been described as a reaction to a stumble during gait. The elevating strategy, which tries to proceed with the perturbed step, was executed as a response to a perturbation during early swing. The lowering strategy, bringing the perturbed leg to the ground and overtaking the obstacle with the contralateral limb, was executed more frequently when the perturbation appeared at mid or late swing. The goal of this paper is to analyze which mechanical factors determine the most advantageous strategy. In order to determine these factors, a mechanical model of the recovery was developed and used to analyze a series of perturbation experiments. It was assumed that the goal of the recovery reaction was to control the trunk as an inverted pendulum during the double-stance phase. In order to be able to control the trunk angle, one foot should be up front and one foot should be behind the hips; otherwise it would be impossible to generate the required trunk torques. The trunk dynamics were expressed in terms of the ground reaction forces and their application point. A larger step (elevation strategy) gives the opportunity to dissolve the perturbation in one step. A small step (lowering strategy) necessarily results in a second quick step, after which the perturbation energy can be dissipated in the second double-stance phase. If a recovery step is too slow, it becomes impossible to counteract the forward flexion of the trunk. It is suggested that a measure of the ability to recover from a stumble could be based on the ability to perform quick steps. [ABSTRACT FROM AUTHOR]

Abstract. Two behavioral goals are achieved simultaneously during forward trunk bending in humans: the bending movement per se and equilibrium maintenance. The objective of the present study was to understand how the two goals are achieved by using a biomechanical model of this task. Since keeping the center of pressure inside the support area is a crucial condition for equilibrium maintenance during the movement, we decided to model an extreme case, called "optimal bending", in which the movement is performed without any center of pressure displacement at all, as if standing on an extremely narrow support. The "optimal bending" is used as a reference in the analysis of experimental data in a companion paper. The study is based on a three-joint (ankle, knee, and hip) model of the human body and is performed in terms of "eigenmovements", i.e., the movements along eigenvectors of the motion equation. They are termed "ankle", "hip", and "knee" eigenmovements according to the dominant joint that provides the largest contribution to the corresponding eigenmovement. The advantage of the eigenmovement approach is the presentation of the coupled system of dynamic equations in the form of three independent motion equations. Each of these equations is equivalent to the motion equation for an inverted pendulum. Optimal bending is constructed as a superposition of two (hip and ankle) eigenmovements. The hip eigenmovement contributes the most to the movement kinematics, whereas the contributions of both eigenmovements into the movement dynamics are comparable. The ankle eigenmovement moves the center of gravity forward and compensates for the backward center of gravity shift that is provoked by trunk bending as a result of dynamic interactions between body segments. An important characteristic of the optimal bending is the timing of the onset of each eigenmovement: the ankle eigenmovement onset precedes that of the hip eigenmovement. Without an earlier onset of the ankle eigenm [ABSTRACT FROM AUTHOR]