Search

Many helicases assemble into ring-shaped hexamers and bind DNA in their central channel. This raises the question as to how the DNA gets into the central channel to form a topologically linked complex. We have used the presteady-state stopped-flow kinetic method and protein fluorescence changes to investigate the mechanism of single-stranded DNA (ssDNA) binding to the bacteriophage T7 helicase-primase, gp4A'. We have found that the kinetics of 30-mer ssDNA binding to a preformed gp4A' hexamer in the presence of both Mg-dTMP-PCP and Mg-dTTP are similar, indicating that Mg-dTTP binding is sufficient and hydrolysis is not necessary for efficient DNA binding. Multiple transient changes in gp4A' fluorescence revealed a four-step mechanism for DNA binding with Mg-dTTP. These transient changes were analyzed by global fitting and kinetic simulation to determine the intrinsic rate constants of this four-step mechanism. The initial steps, including the bimolecular encounter of the DNA with the helicase and a subsequent conformational change, were fast. We propose that these initial steps of DNA binding occur at a readily accessible site, which is likely to be on the outside of the hexamer ring. The binding of the 30-mer ssDNA at this loading site is followed by slower conformational changes that allow the DNA to transit into the central channel of gp4A' via a ring-opening or threading pathway.

The mechanism of transcription repression of T7 RNA polymerase by T7 lysozyme was investigated using a combination of kinetic and equilibrium methods. HPLC gel-filtration experiments demonstrated complex formation between T7 lysozyme, T7 RNA polymerase, and promoter DNA. The interactions between the two proteins were quantitated by measuring in real time the changes in protein fluorescence upon binary complex formation using stopped-flow kinetics. Complex formation between T7 lysozyme and the RNA polymerase was found to occur by a one-step process, with a bimolecular association rate constant of 38 microM-1 S-1 and a dissociation rate constant of 3.5 S-1. These constants provided an equilibrium dissociation constant, Kd, of 92 nM for the polymerase lysozyme complex. The interactions of the polymerase with the DNA were studied by stopped-flow kinetics and nitrocellulose equilibrium DNA binding experiments in the absence and in the presence of T7 lysozyme. The results showed that T7 lysozyme did not prevent or change the kinetic or thermodynamic interactions of the RNA polymerase with the DNA. T7 lysozyme by itself did not bind to the DNA, but since it bound to the RNA polymerase as well as to the polymerase DNA complex, transcription repression must involve the formation of the ternary complex between T7 lysozyme, T7 RNA polymerase and the promoter DNA. The effect of T7 lysozyme was most striking on runoff product synthesis which was greatly inhibited whereas the steady-state synthesis of abortive products, limited by polymerase cycling or RNA dissociation, was relatively unaffected by the presence of T7 lysozyme. Investigation of the pre-steady-state kinetics of transcription in the presence and absence of T7 lysozyme indicated that the inhibition of runoff product synthesis was largely due to inhibition of transcription initiation and transition from initiation to elongation.

Stopped-flow fluorescence assay was applied to identify conformational changes in the catalytic cycle of DNA polymerase beta (Pol beta), using a synthetic DNA primer/template containing 2-aminopurine (2-AP) at the template position opposite the incoming dNTP. Two phases of fluorescence change were observed in the stopped-flow fluorescence assay of the incorporation of the correct nucleotide dTTP. The rate of the slow phase corresponds to that of product formation. This slow phase was identified as the result of a rate-limiting conformational change step before chemistry because this slow phase was also observed with a dideoxynucleotide at the 3' end of the primer which prevents chemical bond formation. The fast phase was also attributed to a conformational change step since its dependence on [dTTP] is hyperbolic. The rates of the two phases and their dependence on [dTTP] and [Mg2+] suggest that the fast conformational change is induced by the binding of MgdNTP and the slow conformational change is induced by the binding of the catalytic Mg2+ ion. The same biphasic kinetics with different rates were also observed with the thio analog dTTPalphaS and incorrect nucleotides dATP, dGTP, and dCTP. The structural nature for the two conformational changes has been discussed in relation to the available structural information of this enzyme. The results could help to explain how a polymerase controls and achieves its fidelity with a multiple conformational change mechanism.

The kinetic mechanism of transcription initiation by bacteriophage T7 RNA polymerase was investigated using transient state kinetic methods. Transcription by bacteriophage T7 RNA polymerase occurs in three stages consisting of initiation, promoter clearance, and elongation. Abortive products, up to 6-8-mer, were synthesized during the initiation phase; the transition from initiation to elongation occurred between the synthesis of 6-8-mer and 11-12-mer, and the processive elongation phase began after the synthesis of 12-mer RNA. Our results show that the synthesis of elongation product from the phi 10 promoter is limited both by the efficiency of initiation and by the frequency at which the polymerase escapes the promoter. Studies with heparin trap suggest that the polymerase maintains contact with the promoter region during multiple turnovers of abortive RNA synthesis; thus, the polymerase does not completely dissociate from the promoter after each event of abortive RNA synthesis. The pre-steady-state kinetics of RNA synthesis indicate that initiation occurs at a rate constant (3.5 s(-1)) that is about 30 times faster than the steady-state rate constant of RNA synthesis (0.1 s(-1)). The steady-state rate constant of RNA synthesis is limited largely by the cycling of the RNA polymerase, whereas initiation is limited by the formation of pppGpG, the first RNA product. We show that the synthesis of pppGpG is not limited by steps associated with GTP binding, DNA binding, or the melting of the promoter DNA. Instead, the kinetic results indicate that initiation at the phi10 promoter is limited either by the first phosphodiester bond formation step or more likely by a conformational change prior to pppGpG formation. Such a conformational change could play a role in proper alignment of the initiating and elongating NTPs for efficient phosphodiester bond formation and in maintaining the fidelity of RNA synthesis.

The equilibrium nucleotide binding and oligomerization of bacteriophage T7 gene 4 helicases have been investigated using thymidine 5'-triphosphate (dTTP), deoxythymidine 5'-(beta, gamma-methylenetriphosphate)(dTMP-PCP), thymidine 5'-diphosphate (dTDP), adenosine 5'-triphosphate (ATP), and adenosine 5'-O-(3-thiotriphosphate) (ATP gamma S). In the presence of nucleotide ligands, T7 helicases self-assemble into hexamers with six potential nucleotide binding sites that are nonequivalent both in the absence and in the presence of single-stranded DNA. All nucleotides tested bind with high affinity to three sites (K(d) = 5 x 10(-6) M, dTTP; 6 x 10(-7) M, dTMP-PCP; 4 x 10(-6) M, dTDP; 3 x 10(-5) M, ATP; 2 x 10(-6) M, ATP gamma S), while binding to the remaining sites is undetectable. Interestingly, nucleotide binding to the high-affinity sites exhibits positive cooperativity which is sensitive to protein concentration. This effect is a result of ligand binding-linked oligomerization wherein helicase oligomer equilibrium changes as a function of both nucleotide and protein concentration. A study of DNA binding shows that 1-2 NTPs bound per hexamer are sufficient for stoichiometric interaction between the helicase and DNA. Thus, the ring-shaped helicase hexamers assemble around DNA with one, two, or three NTPs bound to each hexamer. This study also examines the preferred use of dTTP for T7 helicase-catalyzed DNA unwinding by comparison with ATP, the more commonly used nucleotide ligand. ATP binds to the helicase with 6-fold weaker affinity than dTTP and promotes hexamerization as well as DNA binding. Nevertheless, DNA unwinding with ATP is at least 100-fold slower than with dTTP. Thus, the difference in ATP and dTTP utilization probably lies in a highly specific step in the coupling of NTP hydrolysis to DNA unwinding.

The Neurospora CYT-18 protein, the mitochondrial tyrosyl-tRNA synthetase, functions in the splicing of group I introns. Here, bacterially expressed CYT-18 protein, purified by a new procedure involving polyethyleneimine precipitation to remove tightly bound nucleic acids, was used to characterize properties pertinent to RNA splicing. Analytical ultracentrifugation and other methods showed that the CYT-18 protein is an asymmetric homodimer. The measured frictional ratio, f/fo = 1.55, corresponds to an axial ratio of 10 for a prolate ellipsoid or 12 for an oblate ellipsoid. Like bacterial TyrRSs, the CYT-18 protein exhibits half-sites reactivity, each homodimer having one active site for tyrosyl adenylation and RNA splicing. The splicing activity of CYT-18 was unaffected by aminoacylation substrates at concentrations used in aminoacylation reactions, whereas the TyrRS activity was inhibited by physiological concentrations of the splicing cofactor GTP, as well as CTP or UTP, or by low concentrations of a group I intron RNA. Kinetic measurements suggest that the binding of CYT-18 to a group I intron substrate is a two-step process, with an initial biomolecular step that is close to diffusion limited (3.24 +/- 0.03 x 10(7) M-1s-1) followed by a slower conformational change (0.54 +/- 0.07 s-1). After CYT-18 binding, splicing occurs at a rate of 0.0025 s-1, within 6-fold of the rate of self-splicing of the Tetrahymena large rRNA intron in vitro. The Kd for the complex between the CYT-18 protein and a group I intron substrate, calculated from koff/kon, was < 0.3 pM, substantially lower than determined by presumed equilibrium measurements [Guo, Q., & Lambowitz, A. M. (1992) Genes Dev. 6, 1357-1372]. As a result of this tight binding, the CYT-18 protein functions stoichiometrically in in vitro splicing reactions due to its extremely slow dissociation from the excised intron RNA. The very tight binding of the CYT-18 protein to the intron RNA raises the possibility that specific mechanisms exist for dissociating the protein from the excised intron in vivo.

Lysine 318 in the conserved sequence SXXXGXGKS of bacteriophage T7 gene 4A' protein was mutated to an alanine to understand the effect of this substitution on the helicase and primase activities. The dTTPase activity of 4A'/K318A mutant protein was much lower than that of 4A', and both Km and kcat values were affected. The Km of the mutant protein was 3-5-fold higher, and the kcat was about 100-fold lower, than that of 4A'. The mutation did not affect the ability of 4A'/K318A to assemble into hexamers or bind DNA in the presence of MgdTTP. Interestingly, the mutant protein does not bind DNA in the presence of MgdTMP-PCP. The reduced dTTPase activity, however, decreased the helicase activity of the mutant protein to an undetectable level, whereas its primase activity was only 1.5-2.5-fold lower. When 4A'/K318A mutant protein was mixed with 4A', heterooligomers were formed and the helicase and the DNA-dependent dTTPase activities of 4A' were inhibited, but the DNA-independent activity actually increased. The extent of decrease in activities upon heterooligomer formation depended both on the length of time 4A' and 4A'/K318A proteins were incubated and on the concentration of the mutant protein. In addition, the decrease in the dTTPase activity was observed only when the two proteins were incubated in the absence of MgdTTP and DNA, conditions under which both proteins form unstable hexamers. Even though 4A'/K318A does not bind a 30-mer DNA in the presence of MgdTMP-PCP, heterooligomers were capable of binding DNA with the same stoichiometry as 4A'. Protein-DNA cross-linking experiments with (dT)30 and poly(5-BrdU) showed that DNA interacts with five and perhaps all six subunits of 4A'. Therefore, unless heterooligomer restores the ability of the mutant protein to bind DNA in the presence of MgdTMP-PCP, these results suggest that the DNA can bind 4A' by interacting with a few subunits. However, a fully active hexamer is required for both the helicase and the single-stranded M13 DNA-dependent dTTPase activities.

Protein-DNA interactions of bacteriophage T7 DNA primase/helicase protein 4A' with small synthetic oligodeoxynucleotides were investigated using a 20-base-paired hairpin duplex, and 10-, 30-, and 60-base-long single-stranded DNA. The effect of nucleotide cofactors on DNA binding was examined using membrane binding assays which showed that 4A' binds DNA optimally only in the presence of MgdTMP-PCP, the nonhydrolyzable analog of dTTP. About 20% of single-stranded DNA binding was observed in the presence of MgdTDP, but none was detectable in the absence of nucleotides. Native polyacrylamide gel electrophoresis showed that the DNAs bind predominantly to the hexameric form of 4A'. Larger oligomers of 4A' can bind DNA, but no DNA binding was observed to species smaller than the hexamer. Quantitative equilibrium binding studies at increasing 4A' concentrations and at increasing DNA concentrations showed tight binding of one 10-mer or 30-mer per hexamer. The 4A' hexamer can bind a second strand of DNA, but with a 50-fold weaker affinity than the first strand. The 60-mer showed tight binding to two 4A' hexamers, suggesting that a hexamer may interact with only 30-40 bases of single-stranded DNA. This was corroborated by nuclease protection experiments where the smallest length of DNA protected by 4A' or 4B protein was found to be about 30 bases. Equilibrium binding studies and competitive DNA binding data are consistent with a weaker affinity of 4A' for the duplex DNA. Only 20-25% of duplex DNA binding was observed at increasing 4A' protein in the presence of MgdTMP-PCP. About four duplex DNAs can bind each 4A' hexamer at increasing DNA concentrations, but their weaker binding was evident from their facile dissociation from 4A' in the presence of competing single-stranded DNA.

We present a kinetic partitioning mechanism by which the highly efficient 3'----5' exonuclease activity of T7 DNA polymerase maximizes its contribution to replication fidelity with minimal excision of correctly base-paired DNA. The elementary rate constants for the proposed mechanism have been measured directly from single-turnover experiments by using rapid chemical quench-flow techniques. The exonuclease activity of T7 DNA polymerase toward single-stranded DNA is quite fast (kx greater than 700 s-1). This rapid exonuclease is restrained with double-stranded DNA by a kinetic partitioning mechanism that favors the binding of the DNA to the polymerase site to prevent the rapid degradation of matched DNA and yet allows selective removal of mismatched DNAs. Both matched and mismatched DNAs bind tightly to the polymerase site, with approximately equal affinities, Kdp = 20 and 10 nM, respectively. Selective removal of the mismatch is governed by the rate of transfer of the DNA from the polymerase to the exonuclease site (kp----x). The rapid excision of matched DNA is limited by a slow transfer rate (kp----x = 0.2 s-1) from the polymerase to the exonuclease site relative to the rate of polymerization [kp = 300 s-1; Patel et al. (1991) Biochemistry (first of three papers in this issue)]. Removal of mismatched DNA is facilitated by its faster transfer rate (kp----x = 2.3 s-1) to the exonuclease site relative to the slow rate of polymerization over a mismatch [kpi = 0.012 s-1; Wong et al. (1991) Biochemistry (second of three papers in this issue)].(ABSTRACT TRUNCATED AT 250 WORDS)

An exonuclease-deficient mutant of T7 DNA polymerase was constructed and utilized in a series of kinetic studies on misincorporation and next correct dNTP incorporation. By using a synthetic oligonucleotide template-primer system for which the kinetic pathway for correct incorporation has been solved [Patel, S.S., Wong, I., & Johnson, K. A. (1991) Biochemistry (first of three papers in this issue)], the kinetic parameters for the incorporation of the incorrect triphosphates dATP, dCTP, and dGTP were determined, giving, respectively, kcat/Km values of 91, 23, and 4.3 M-1 s-1 and a discrimination in the polymerization step of 10(5)-10(6). The rates of misincorporation in all cases were linearly dependent on substrate concentration up to 4 mM, beyond which severe inhibition was observed. Competition of correct incorporation versus dCTP revealed an estimated Ki of approximately 6-8 mM, suggesting a corresponding kcat of 0.14s-1. Moderate elemental effects of 19-, 17-, and 34-fold reduction in rates were measured by substituting the alpha-thiotriphosphate analogues for dATP, dCTP, and dGTP, respectively, indicating that the chemistry step is partially rate-limiting. The absence of a burst of incorporation during the first turnover places the rate-limiting step at a triphosphate binding induced conformational change before chemistry. In contrast, the incorporation of the next correct triphosphate, dCTP, on a mismatched DNA substrate was saturable with a Km of 87 microM for dCTP, 4-fold higher than the Kd for the correct incorporation on duplex DNA, and a kcat of 0.025 s-1. A larger elemental effect of 60, however, suggests a rate-limiting chemistry step. The rate of pyrophosphorolysis on a mismatched 3'-end is undetectable, indicating that pyrophosphorolysis does not play a proofreading role in replication. These results show convincingly that the T7 DNA polymerase discriminates against the incorrect triphosphate by an induced-fit conformational change and that, following misincorporation, the enzyme then selects against the resultant mismatched DNA by a slow, rate-limiting chemistry step, thereby allowing sufficient time for the release of the mismatched DNA from the polymerase active site to be followed by exonucleolytic error correction.

The elementary steps of DNA polymerization catalyzed by T7 DNA polymerase have been resolved by transient-state analysis of single nucleotide incorporation, leading to the complete pathway: [formula: see text] where E, D, N, and P represent T7 DNA polymerase, DNA primer/template, deoxynucleoside triphosphate, and inorganic pyrophosphate, respectively. A DNA primer/template consisting of a synthetic 25/36-mer has been used as a substrate for correct nucleotide incorporation of dTTP in all the experiments. The rate constants and equilibrium constants of each step have been established by direct measurement of individual reactions and fit by computer simulation of the data to obtain a single set of rate constants accounting for all the data. Analysis of the single-turnover kinetics provided measurements of equilibrium dissociation constants for 25/36-mer, dTTP, and PPi equal to 18 nM (koff/kon), 18 microM (k-1/k1), and 2 mM (k5/k-5), respectively. The rate-limiting step during single-nucleotide incorporation has been identified as a conformational change, E.Dn.N----E'.Dn.N, which occurs at a rate of 300 s-1 (k2) upon binding of the correct dNTP. Accordingly, tighter binding of the transition states for the reaction resulting from the conformational change facilitates the phosphodiester bond formation. The chemical step itself was excluded as the rate-limiting step because of the small phosphothioate elemental effect. An observed rate constant of 70 s-1 for dTTP (alpha S) incorporation suggest that the chemical step (k3) occurs at a fast rate, greater than or equal to 9000 s-1. Following chemistry, the resulting ternary complex, E'.Dn+1.P, undergoes a second conformational change at a rate of 1200 s-1 (k4), leading to release of PPi and translocation of the DNA to continue subsequent cycles of polymerization. The rate constants of the reverse steps, 100 s-1 (k-2), greater than or equal to 18,000 s-1 (k-3) and 18 s-1 (k-4), were derived as fits to the data based upon simulation of single-turnover kinetics of pyrophosphorolysis including measurements of pyrophosphate exchange and the overall equilibrium constant of 1.0 x 10(4) for elongation of E.25/36-mer and analysis of the kinetics of the pulse-chase experiment. These studies provide the first complete and self-consistent thermodynamic descriptions of DNA polymerase and establish the basis for quantitative assessment of the reactions contributing to its extraordinary fidelity.(ABSTRACT TRUNCATED AT 400 WORDS)