Search

Sampling campaigns indoors have shown that occupants exposed to contaminated air generally exhibit diverse health outcomes. This study intends to assess the deposition rates of total settleable dust and bioburden in the indoor air of dwellings onto quartz fiber filters and electrostatic dust collectors (EDCs), respectively. EDC extracts were inoculated onto malt extract agar (MEA) and dichloran glycerol (DG18) agar-based media used for fungal contamination characterization, while tryptic soy agar (TSA) was applied for total bacteria assessment, and violet red bile agar (VRBA) for Gram-negative bacteria. Azole-resistance screening and molecular detection by qPCR was also performed. Dust loading rates ranged from 0.111 to 3.52, averaging 0.675 μg cm−2 day−1. Bacterial counts ranged from undetectable to 16.3 colony-forming units (CFU) m−2 day−1 and to 2.95 CFU m−2 day−1 in TSA and VRBA, respectively. Fungal contamination ranged from 1.97 to 35.4 CFU m−2 day−1 in MEA, and from undetectable to 48.8 CFU m−2 day−1 in DG18. Penicillium sp. presented the highest prevalence in MEA media (36.2%) and Cladosporium sp. in DG18 (39.2%). It was possible to observe: (a) settleable dust loadings and fungal contamination higher in dwellings with pets; (b) fungal species considered indicators of harmful fungal contamination; (c) Aspergillus section Candidi identified in supplemented media with voriconazole and posaconazole; (d) specific housing typologies and (e) specific housing characteristics influencing the microbial contamination.

The exposure to particles and bioaerosols has been associated with the increase in health effects in children. The objective of this study was to assess the indoor exposure to bioburden in the indoor microenvironments more frequented by children. Air particulate matter (PM) and settled dust were sampled in 33 dwellings and four schools with a medium volume sampler and with a passive method using electrostatic dust collectors (EDC), respectively. Settled dust collected by EDC was analyzed by culture-based methods (including azole resistance profile) and using qPCR. Results showed that the PM2.5 and PM10 concentrations in classrooms (31.15 μg/m3 and 57.83 μg/m3, respectively) were higher than in homes (15.26 μg/m3 and 18.95 μg/m3, respectively) and highly exceeded the limit values established by the Portuguese legislation for indoor air quality. The fungal species most commonly found in bedrooms was Penicillium sp. (91.79%), whereas, in living rooms, it was Rhizopus sp. (37.95%). Aspergillus sections with toxigenic potential were found in bedrooms and living rooms and were able to grow on VOR. Although not correlated with PM, EDC provided information regarding the bioburden. Future studies, applying EDC coupled with PM assessment, should be implemented to allow for a long-term integrated sample of organic dust.

The assessment and control of microbial contamination in health care facilities is presently a mandatory and vital part of strategies to prevent and control hospital-acquired infections. This study aims to assess the bioburden with two passive sampling methods (30 ventilations grids swabs and 16 electrostatic dust collectors (EDCs)) at Clinical Pathology Services. The fungal burden was characterized through molecular tools, antifungal resistance, and the mycotoxins and cytotoxicity profile. Total bacteria presented the highest prevalence in both matrixes, whereas Gram-bacteria presented the lowest. Swabs presented a higher prevalence (27.6%) for fungal burden. Chrysonilia sitophila presented the highest prevalence in swabs, whereas for EDCs, C. sitophila and Mucor sp. were the most prevalent. Concerning Aspergillus genera on swabs, section Flavi was the one with the highest prevalence (58.02%), whereas, for EDCs, section Versicolores was the only section observed (100%). Aspergillus section Fumigati was detected in 10 swabs and 7 EDC samples and Aspergillus section Versicolores was detected in one EDC sample. Fungal growth on azole-supplemented media was observed in eight EDC samples. No mycotoxins were detected in any of the samples. A low cytotoxic effect was observed in two sites upon incubation of collected samples with A549 and SK cells and in two other sites upon incubation of collected samples with SK cells only. A medium cytotoxic effect was observed with one EDC sample upon incubation with A549 cells. This study reinforces the need of determination of the azole resistance profile for fungal species and allowed a preliminary risk characterization regarding the cytotoxicity. An intervention including the use of a ultraviolet with wavelength between 200 nm and 280 nm (UVC)—emitting device and an increased maintenance and cleaning of the central heating, ventilation, and air conditioning (HVAC) systems should be ensured to promote the reduction of microbial contamination.

Organic dust is widespread in the environment including occupational settings, such as bakeries. Recently, a new collection device-the electrostatic dust cloth (EDC)-has been described for the assessment of occupational exposures. The aim of this study was to investigate the suitability of EDC for identifying the distribution patterns and exposure concentrations of particulate matter and microbial contaminants such as fungi and bacteria in bakeries. Twelve bakeries were selected, and dust was allowed to settle for 13 to 16 days on EDCs (a total of 33 samples). Particle counts and size distribution (0.3 μm, 0.5 μm, 1 μm, 2.5 μm, 5 μm and 10 μm) were measured with direct-reading equipment. Higher EDC mass was significantly correlated (p values < 0.05) with higher fungal load on dichloran glycerol (DG18) and with particle size distribution in the 0.3 μm, 0.5 μm, 1.0 μm and 10.0 μm range. Fungal levels on malt extract agar (MEA) ranged from 0 to 2886 CFU/m2 EDC in the warehouse setting, 0 to 500 CFU/m2 EDC in the production setting, and 0 to 3135 CFU/m2 EDC in the store. Penicillium sp. (42.56%) was the most frequent fungi. Total bacterial load ranged from 0 to 18,859 CFU/m2 EDC in the warehouse, 0 to 71,656 CFU/m2 EDC in production, and 0 to 21,746 CFU/m2 EDC in the store. EDC assessment provided a longer-term integrated sample of organic dust, useful for identifying critical worksites in which particulate matter and bio-burden exposures are elevated. These findings suggest that EDC can be applied as a screening method for particulate matter-exposure assessment and as a complementary method to quantify exposures in occupational environments. [ABSTRACT FROM AUTHOR]

Organic dust is widespread in the environment including occupational settings, such as bakeries. Recently, a new collection device—the electrostatic dust cloth (EDC)—has been described for the assessment of occupational exposures. The aim of this study was to investigate the suitability of EDC for identifying the distribution patterns and exposure concentrations of particulate matter and microbial contaminants such as fungi and bacteria in bakeries. Twelve bakeries were selected, and dust was allowed to settle for 13 to 16 days on EDCs (a total of 33 samples). Particle counts and size distribution (0.3 µm, 0.5 µm, 1 µm, 2.5 µm, 5 µm and 10 µm) were measured with direct-reading equipment. Higher EDC mass was significantly correlated (p values < 0.05) with higher fungal load on dichloran glycerol (DG18) and with particle size distribution in the 0.3 µm, 0.5 µm, 1.0 µm and 10.0 µm range. Fungal levels on malt extract agar (MEA) ranged from 0 to 2886 CFU/m2 EDC in the warehouse setting, 0 to 500 CFU/m2 EDC in the production setting, and 0 to 3135 CFU/m2 EDC in the store. Penicillium sp. (42.56%) was the most frequent fungi. Total bacterial load ranged from 0 to 18,859 CFU/m2 EDC in the warehouse, 0 to 71,656 CFU/m2 EDC in production, and 0 to 21,746 CFU/m2 EDC in the store. EDC assessment provided a longer-term integrated sample of organic dust, useful for identifying critical worksites in which particulate matter and bio-burden exposures are elevated. These findings suggest that EDC can be applied as a screening method for particulate matter-exposure assessment and as a complementary method to quantify exposures in occupational environments.

Sampling campaigns indoors have shown that occupants exposed to contaminated air generally exhibit diverse health outcomes. This study intends to assess the deposition rates of total settleable dust and bioburden in the indoor air of dwellings onto quartz fiber filters and electrostatic dust collectors (EDCs), respectively. EDC extracts were inoculated onto malt extract agar (MEA) and dichloran glycerol (DG18) agar-based media used for fungal contamination characterization, while tryptic soy agar (TSA) was applied for total bacteria assessment, and violet red bile agar (VRBA) for Gram-negative bacteria. Azole-resistance screening and molecular detection by qPCR was also performed. Dust loading rates ranged from 0.111 to 3.52, averaging 0.675 μg cm−2 day−1. Bacterial counts ranged from undetectable to 16.3 colony-forming units (CFU) m−2 day−1 and to 2.95 CFU m−2 day−1 in TSA and VRBA, respectively. Fungal contamination ranged from 1.97 to 35.4 CFU m−2 day−1 in MEA, and from undetectable to 48.8 CFU m−2 day−1 in DG18. Penicillium sp. presented the highest prevalence in MEA media (36.2%) and Cladosporium sp. in DG18 (39.2%). It was possible to observe: (a) settleable dust loadings and fungal contamination higher in dwellings with pets; (b) fungal species considered indicators of harmful fungal contamination; (c) Aspergillus section Candidi identified in supplemented media with voriconazole and posaconazole; (d) specific housing typologies and (e) specific housing characteristics influencing the microbial contamination. [ABSTRACT FROM AUTHOR]

The exposure to particles and bioaerosols has been associated with the increase in health effects in children. The objective of this study was to assess the indoor exposure to bioburden in the indoor microenvironments more frequented by children. Air particulate matter (PM) and settled dust were sampled in 33 dwellings and four schools with a medium volume sampler and with a passive method using electrostatic dust collectors (EDC), respectively. Settled dust collected by EDC was analyzed by culture-based methods (including azole resistance profile) and using qPCR. Results showed that the PM2.5 and PM10 concentrations in classrooms (31.15 μg/m3 and 57.83 μg/m3, respectively) were higher than in homes (15.26 μg/m3 and 18.95 μg/m3, respectively) and highly exceeded the limit values established by the Portuguese legislation for indoor air quality. The fungal species most commonly found in bedrooms was Penicillium sp. (91.79%), whereas, in living rooms, it was Rhizopus sp. (37.95%). Aspergillus sections with toxigenic potential were found in bedrooms and living rooms and were able to grow on VOR. Although not correlated with PM, EDC provided information regarding the bioburden. Future studies, applying EDC coupled with PM assessment, should be implemented to allow for a long-term integrated sample of organic dust. [ABSTRACT FROM AUTHOR]

The assessment and control of microbial contamination in health care facilities is presently a mandatory and vital part of strategies to prevent and control hospital-acquired infections. This study aims to assess the bioburden with two passive sampling methods (30 ventilations grids swabs and 16 electrostatic dust collectors (EDCs)) at Clinical Pathology Services. The fungal burden was characterized through molecular tools, antifungal resistance, and the mycotoxins and cytotoxicity profile. Total bacteria presented the highest prevalence in both matrixes, whereas Gram-bacteria presented the lowest. Swabs presented a higher prevalence (27.6%) for fungal burden. Chrysonilia sitophila presented the highest prevalence in swabs, whereas for EDCs, C. sitophila and Mucor sp. were the most prevalent. Concerning Aspergillus genera on swabs, section Flavi was the one with the highest prevalence (58.02%), whereas, for EDCs, section Versicolores was the only section observed (100%). Aspergillus section Fumigati was detected in 10 swabs and 7 EDC samples and Aspergillus section Versicolores was detected in one EDC sample. Fungal growth on azole-supplemented media was observed in eight EDC samples. No mycotoxins were detected in any of the samples. A low cytotoxic effect was observed in two sites upon incubation of collected samples with A549 and SK cells and in two other sites upon incubation of collected samples with SK cells only. A medium cytotoxic effect was observed with one EDC sample upon incubation with A549 cells. This study reinforces the need of determination of the azole resistance profile for fungal species and allowed a preliminary risk characterization regarding the cytotoxicity. An intervention including the use of a ultraviolet with wavelength between 200 nm and 280 nm (UVC)—emitting device and an increased maintenance and cleaning of the central heating, ventilation, and air conditioning (HVAC) systems should be ensured to promote the reduction of microbial contamination. [ABSTRACT FROM AUTHOR]