Search

With the rapid development of the economy and continuous improvement in people's living standards, the predictions of the air quality index have attracted wide attention. In this paper, a new feature selection method (Pearson-MI) and a combined model construction method (modified inverse variance method) were proposed to study the air quality index (AQI) and its influencing factors in Changchun. The Pearson-MI method selects the factors that affect the AQI of Changchun City from many influencing factors. This method reduces the RMSE of the LSTM model and XGBoost model by 27% and 5% and the MAE by 41% and 5%, respectively. A model that combines XGBoost, SVR, RF, and LSTM was constructed using the inverse variance method to predict the air quality index of Changchun City. The modified combined model resulted in a 2% reduction in RMSE and a 0.6% reduction in MAE compared with the unmodified combined model. The numerical results of our study show that the prediction accuracy of the modified combined model is obviously higher than that of the basic model, and the prediction accuracy is further improved under the Pearson-MI feature selection. [ABSTRACT FROM AUTHOR]

With the exponential growth in the amount of available data, traditional meteorological data processing algorithms have become overwhelmed. The application of artificial intelligence in simultaneous prediction of multi-parameter meteorological data has attracted much attention. However, existing single-task network models are generally limited by the data correlation dependence problem. In this paper, we use a priori knowledge for network design and propose a multitask model based on an asymmetric sharing mechanism, which effectively solves the correlation dependence problem in multi-parameter meteorological data prediction and achieves simultaneous prediction of multiple meteorological parameters with complex correlations for the first time. The performance of the multitask model depends largely on the relative weights among the task losses, and manually adjusting these weights is a difficult and expensive process, which makes it difficult for multitask learning to achieve the expected results in practice. In this paper, we propose an improved multitask loss processing method based on the assumptions of homoscedasticity uncertainty and the Laplace loss distribution and validate it using the German Jena dataset. The results show that the method can automatically balance the losses of each subtask and has better performance and robustness. [ABSTRACT FROM AUTHOR]

This paper proposes a new post-processing method for model data in order to improve typhoon track and rainfall forecasts. The model data used in the article include low-resolution ensemble forecasts and high-resolution forecasts. The entire improvement method contains the following three steps. The first step is to correct the typhoon track forecast: three ensemble member optimization methods are applied to the low-resolution ensemble forecasts, and then the best optimization method is selected with the principle of the smallest average distance error. The results of rainfall forecasts show that the corrected rainfall forecast performs better than the original forecasts. The second step is to derive the high-resolution probability rainfall forecast: the neighborhood method is applied to the deterministic high-resolution rainfall forecast. The last step is to correct the typhoon rainfall forecast: the low- and high-resolution forecasts are blended using the probability-matching method with two different schemes. The results show that the forecasts of the two schemes perform better than the original forecast under all rainfall thresholds and all forecast lead times. In terms of bias score, a rain forecast from one scheme corrects the rainfall deviation from observation better for light and moderate rainfall, whereas a rain forecast from another scheme corrects the rainfall deviation better for heavy and torrential rainfall. The better performance of corrected rain forecasts in the case of Typhoon Lekima and Rumbia over eastern China is demonstrated. [ABSTRACT FROM AUTHOR]

As a challenge in the construction of a "seamless forecast" system, improving the prediction skills of subseasonal forecasts is a key issue for meteorologists. In view of the evolution characteristics of numerical models and deep-learning models for subseasonal forecasts, as forecast times increase, the prediction skill for high-frequency components will decrease, as the lead time is already far beyond the predictability. Meanwhile, intraseasonal low-frequency components are essential to the change in general circulation on subseasonal timescales. In this paper, the Global Subseasonal Forecast Model (GSFM v1.0) first extracted the intraseasonal oscillation (ISO) components of atmospheric signals and used an improved deep-learning model (SE-ResNet) to train and predict the ISO components of geopotential height at 500 hPa (Z500) and temperature at 850 hPa (T850). The results show that the 10–30 day prediction performance of the SE-ResNet model is better than that of the model trained directly with original data. Compared with other models/methods, this model has a good ability to depict the subseasonal evolution of the ISO components of Z500 and T850. In particular, although the prediction results from the Climate Forecast System Version 2 have better performance through 10 days, the SE-ResNet model is substantially superior to CFSv2 through 10–30 days, especially in the middle and high latitudes. The SE-ResNet model also has a better effect in predicting planetary waves with wavenumbers of 3–8. Thus, the application of data-driven subseasonal forecasts of atmospheric ISO components may shed light on improving the skill of seasonal forecasts. [ABSTRACT FROM AUTHOR]

In today's urban environments, accurately measuring and forecasting air pollution is crucial for combating the effects of pollution. Machine learning (ML) is now a go-to method for making detailed predictions about air pollution levels in cities. In this study, we dive into how air pollution in urban settings is measured and predicted. Using the PRISMA methodology, we chose relevant studies from well-known databases such as PubMed, Springer, IEEE, MDPI, and Elsevier. We then looked closely at these papers to see how they use ML algorithms, models, and statistical approaches to measure and predict common urban air pollutants. After a detailed review, we narrowed our selection to 30 papers that fit our research goals best. We share our findings through a thorough comparison of these papers, shedding light on the most frequently predicted air pollutants, the ML models chosen for these predictions, and which ones work best for determining city air quality. We also take a look at Skopje, North Macedonia's capital, as an example of a city still working on its air pollution measuring and prediction systems. In conclusion, there are solid methods out there for air pollution measurement and prediction. Technological hurdles are no longer a major obstacle, meaning decision-makers have ready-to-use solutions to help tackle the issue of air pollution. [ABSTRACT FROM AUTHOR]

Accurate and fine-grained individual air quality index (IAQI) prediction is the basis of air quality index (AQI), which is of great significance for air quality control and human health. Traditional approaches, such as time series, recurrent neural network or graph convolutional network, cannot effectively integrate spatial-temporal and meteorological factors and manage the dynamic edge relationship among scattered monitoring stations. In this paper, a ST-CCN-IAQI model is proposed based on spatial-temporal causal convolution networks. Both the spatial effects of multi-source air pollutants and meteorological factors were considered via spatial attention mechanism. Time-dependent features in the causal convolution network were extracted by stacked dilated convolution and time attention. All the hyper-parameters in ST-CCN-IAQI were tuned by Bayesian optimization. Shanghai air monitoring station data were employed with a series of baselines (AR, MA, ARMA, ANN, SVR, GRU, LSTM and ST-GCN). Final results showed that: (1) For a single station, the RMSE and MAE values of ST-CCN-IAQI were 9.873 and 7.469, decreasing by 24.95% and 16.87% on average, respectively. R2 was 0.917, with an average 5.69% improvement; (2) For all nine stations, the mean RMSE and MAE of ST-CCN-IAQI were 9.849 and 7.527, respectively, and the R2 value was 0.906. (3) Shapley analysis showed PM10, humidity and NO2 were the most influencing factors in ST-CCN-IAQI. The Friedman test, under different resampling, further confirmed the advantage of ST-CCN-IAQI. The ST-CCN-IAQI provides a promising direction for fine-grained IAQI prediction. [ABSTRACT FROM AUTHOR]

For grid stability, operation, and planning, solar irradiance forecasting is crucial. In this paper, we provide a method for predicting the Global Horizontal Irradiance (GHI) mean values one hour in advance. Sky images are utilized for training the various forecasting models along with measured meteorological data in order to account for the short-term variability of solar irradiance, which is mostly caused by the presence of clouds in the sky. Additionally, deep learning models like the multilayer perceptron (MLP), convolutional neural networks (CNN), long short-term memory (LSTM), or their hybridized forms are widely used for deterministic solar irradiance forecasting. The implementation of probabilistic solar irradiance forecasting, which is gaining prominence in grid management since it offers information on the likelihood of different outcomes, is another task we carry out using quantile regression. The novelty of this paper lies in the combination of a hybrid deep learning model (CNN-LSTM) with quantile regression for the computation of prediction intervals at different confidence levels. The training of the different machine learning algorithms is performed over a year's worth of sky images and meteorological data from the years 2019 to 2020. The data were measured at the University of French Polynesia (17.5770° S, 149.6092° W), on the island of Tahiti, which has a tropical climate. Overall, the hybrid model (CNN-LSTM) is the best performing and most accurate in terms of deterministic and probabilistic metrics. In addition, it was found that the CNN, LSTM, and ANN show good results against persistence. [ABSTRACT FROM AUTHOR]

General circulation models (GCMs) run at regional resolution or at a continental scale. Therefore, these results cannot be used directly for local temperatures and precipitation prediction. Downscaling techniques are required to calibrate GCMs. Statistical downscaling models (SDSM) are the most widely used for bias correction of GCMs. However, few studies have compared SDSM with multi-layer perceptron artificial neural networks and in most of these studies, results indicate that SDSM outperform other approaches. This paper investigates an alternative architecture of neural networks, namely the long-short-term memory (LSTM), to forecast two critical climate variables, namely temperature and precipitation, with an application to five climate gauging stations in the Lake Chad Basin. Lake Chad is a data scarce area which has been impacted by severe drought, where water resources have been influenced by climate change and recent agricultural expansion. SDSM was used as the benchmark in this paper for temperature and precipitation downscaling for monthly time–scales weather prediction, using grid resolution GCM output at a 5 degrees latitude × 5 degrees longitude global grid. Three performance indicators were used in this study, namely the root mean square error (RMSE), to measure the sensitivity of the model to outliers, the mean absolute percentage error (MAPE), to estimate the overall performance of the predictions, as well as the Nash Sutcliffe Efficiency (NSE), which is a standard measure used in the field of climate forecasting. Results on the validation set for SDSM and test set for LSTM indicated that LSTM produced better accuracy on average compared to SDSM. For precipitation forecasting, the average RMSE and MAPE for LSTM were 33.21 mm and 24.82% respectively, while the average RMSE and MAPE for SDSM were 53.32 mm and 34.62% respectively. In terms of three year ahead minimum temperature forecasts, LSTM presents an average RMSE of 4.96 degree celsius and an average MAPE of 27.16%, while SDSM presents an average RMSE of 8.58 degree celsius and an average MAPE of 12.83%. For maximum temperatures forecast, LSTM presents an average RMSE of 4.27 degree celsius and an average MAPE of 11.09 percent, while SDSM presents an average RMSE of 9.93 degree celsius and an average RMSE of 12.07%. Given the results, LSTM may be a suitable alternative approach to downscale global climate simulation models' output, to improve water management and long-term temperature and precipitations forecasting at local level. [ABSTRACT FROM AUTHOR]

To predict and explore the return period wind speed distribution in Beijing urban area, based on the short-term measured wind speed record, the measured independent storm peak samples are extracted and the Monte–Carlo numerical simulation method is used to randomly generate pseudo-independent storm peak samples with the same distribution as the independent storm peak samples. In addition, the appropriate threshold is used to select and extract the over-threshold independent storm peak samples from the measured samples. And, then, the return period wind speed of the whole wind direction is predicted. Further, the traditional Cook method is used to predict and analyze the return period wind speed of each wind direction according to the measured wind speed data. The results show that the return period wind speed prediction results of the whole wind direction corresponding to the simulated pseudo samples and the measured over-threshold samples are basically close to each other, and the maximum relative deviation is less than 7%. The mean relative deviation of the return period wind speed prediction results is about 10.6% between each wind direction and the whole wind direction, and the mean relative deviation is about 9.4% between the RPWS prediction result of each wind direction and the design value of the code. In addition, the return period wind speed prediction values of the west by southwest, northwest and north by northeast wind directions exceed the design value of the code, while the predicted values of the other wind directions are within the envelope range of the design value of the code. Finally, the research content of this paper can provide some reference for the wind resistance design analysis of building structures in Beijing area. [ABSTRACT FROM AUTHOR]

This paper investigates the effect of the architectural design of deep learning models in combination with a feature engineering approach considering the temporal variation in the features in the case of tropospheric ozone forecasting. Although deep neural network models have shown successful results by extracting features automatically from raw data, their performance in the domain of air quality forecasting is influenced by different feature analysis approaches and model architectures. This paper proposes a simple but effective analysis of tropospheric ozone time series data that can reveal temporal phases of the ozone evolution process and assist neural network models to reflect these temporal variations. We demonstrate that addressing the ozone evolution phases when developing the model architecture improves the performance of deep neural network models. As a result, we evaluated our approach on the CNN model and showed that not only does it improve the performance of the CNN model, but also that the CNN model in combination with our approach boosts the performance of the other deep neural network models such as LSTM. The development of the CNN, LSTM-CNN, and CNN-LSTM models using the proposed approach improved the prediction performance of the models by 3.58%, 1.68%, and 3.37%, respectively. [ABSTRACT FROM AUTHOR]

Tidal phenomenon is a significant dynamical phenomenon in the ocean, and the accurate prediction of tide is an important task for various maritime activities. This paper proposes analysis method considering tidal periodicity and apply it to the actual tide prediction. The results prove that this method can solve the delay problem in tide prediction, improve the accuracy of prediction. Compared with the tidal harmonic analysis method, the prediction result of this method is more accurate and requires less data for short-term tidal forecast. Although this study can only provide an accurate forecast for 3 days, it is enough to deal with risks. How to improve the accuracy of long-term prediction is one of the future research directions. [ABSTRACT FROM AUTHOR]

Accurate short-term precipitation forecast is extremely important for urban flood warning and natural disaster prevention. In this paper, we present an innovative deep learning model named ISA-PredRNN (improved self-attention PredRNN) for precipitation nowcasting based on radar echoes on the basis of the advanced PredRNN-V2. We introduce the self-attention mechanism and the long-term memory state into the model and design a new set of gating mechanisms. To better capture different intensities of precipitation, the loss function with weights was designed. We further train the model using a combination of reverse scheduled sampling and scheduled sampling to learn the long-term dynamics from the radar echo sequences. Experimental results show that the new model (ISA-PredRNN) can effectively extract the spatiotemporal features of radar echo maps and obtain radar echo prediction results with a small gap from the ground truths. From the comparison with the other six models, the new ISA-PredRNN model has the most accurate prediction results with a critical success index (CSI) of 0.7001, 0.5812 and 0.3052 under the radar echo thresholds of 10 dBZ, 20 dBZ and 30 dBZ, respectively. [ABSTRACT FROM AUTHOR]

Short-term rainfall forecast using GNSS-derived tropospheric parameters has gradually become a research hotspot in GNSS meteorology. Nevertheless, the occurrence of rainfall can be attributed to the impact of various weather factors. With only using tropospheric parameters retrieved from GNSS (such as ZTD or PWV) for linear forecast, it could be challenging to describe the process of rainfall occurrence accurately. Unlike traditional linear algorithms, machine learning can construct better the relationship between various meteorological parameters and rainfall. Therefore, a combined linear–nonlinear short-term rainfall forecast method is proposed in this paper. In this method, the PWV time series is first linearly fitted using least squares, and rainfall events are determined based on the PWV value, PWV variation, and PWV variation rate. Then, a support vector machine (SVM) is used to establish a nonlinear rainfall forecasting model using the PWV value, air temperature, air pressure, and rainfall. Finally, the previous two rainfall forecast methods are combined to obtain the final rainfall event. To evaluate the accuracy of the proposed method, experiments were conducted utilizing the temperature, pressure, and rainfall data from ERA5. The experimental results show that, compared to existing short-term rainfall forecast models, the proposed method could significantly lower the false alarm rate (FAR) of rainfall forecasts without compromising the true detection rate (TDR), which were 26.33% and 98.66%, respectively. In addition, the proposed method was verified using measured GNSS and meteorological data from Yunmao City, Guangdong, and the TDR and FAR of the verified results were 100% and 20.2%, respectively, which were proven to apply to actual rainfall forecasts. [ABSTRACT FROM AUTHOR]

Time-series forecasting has a wide range of application scenarios. Predicting particulate matter with a diameter of 2.5 μm or less (PM2.5) in the future is a vital type of time-series forecasting task where valid forecasting would provide an important reference for public decisions. The current state-of-the-art general time-series model, TimesNet, has achieved a level of performance well above the mainstream level on most benchmarks. Attributing this success to an ability to disentangle intraperiod and interperiod temporal variations, we propose TimesNet-PM2.5. To make this model more powerful for concrete PM2.5 prediction tasks, task-oriented improvements to its structure have been added to enhance its ability to predict specific time spots through better interpretability and meaningful visualizations. On the one hand, this paper rigorously investigates the impact of various meteorological indicators on PM2.5 levels, examining their primary influencing factors from both local and global perspectives. On the other hand, using visualization techniques, we validate the capability of representation learning in time-series forecasting and performance on the forecasting task of the TimesNet-PM2.5. Experimentally, TimesNet-PM2.5 demonstrates an improvement over the original TimesNet. Specifically, the Mean Squared Error (MSE) improved by 8.8% for 1-h forecasting and by 22.5% for 24-h forecasting. [ABSTRACT FROM AUTHOR]

The atmospheric environment is of great importance to human health. However, its influencing factors are complex and variable. An efficient technique is required to more precisely estimate PM2.5 concentration values. In this paper, an enhanced Sparrow Search Algorithm (LASSA)-optimized Light Gradient Boosting Machine (LightGBM) is proposed for PM2.5 concentration prediction. This approach can provide accurate predictions while also reducing potential losses resulting from unexpected events. LightGBM is regarded as an outstanding machine learning approach; however, it includes hyperparameters that must be optimally mixed in order to achieve the desired results. We update the Sparrow Search Algorithm (SSA) and utilize it to identify the optimal combination of the most crucial parameters, using cross-validation to increase the reliability. Using limited air quality data and meteorological data as inputs, PM2.5 concentration values were predicted. The LASSA-LGB's output was compared to normal LGB, SSA-LGB and ISSA-LGB. The findings demonstrate that LASSA-LGB outperforms the other models in terms of prediction accuracy. The RMSE and MAPE error indices were lowered from 3% to 16%. The concordance correlation coefficient is not less than 0.91, and the R2 reached 0.96. This indicates that the proposed model has potential advantages in the field of PM2.5 concentration prediction. [ABSTRACT FROM AUTHOR]

In subtropical regions, heavy rains from cumulonimbus clouds can cause disasters such as flash floods and mudslides. The accurate prediction of cumulonimbus cloud distribution is crucial for mitigating such losses. Traditional machine learning approaches have been used on radar echo data generated by constant altitude plan position indicator (CAPPI) radar systems for predicting cumulonimbus cloud distribution. However, the results are often too foggy and fuzzy. This paper proposes a novel approach that integrates graph convolutional networks (GCN) and trajectory gated recurrent units (TrajGRU) with an attention mechanism to predict cumulonimbus cloud distribution from radar echo data. Experiments were conducted using the moving modified National Institute of Standards and Technology (moving MNIST) dataset and real-world radar echo data, and the proposed model showed a 59.12% improvement in mean square error (MSE) and a 16.26% improvement in structure similarity index measure (SSIM) on average in the moving MNIST dataset, a 65.40% improvement in MSE, and an 10.29% improvement in SSIM on average in the radar echo dataset. These results demonstrate the effectiveness of the proposed approach for improving the prediction accuracy of cumulonimbus cloud distribution. [ABSTRACT FROM AUTHOR]

The RHAPS (Redox-Activity And Health-Effects Of Atmospheric Primary And Secondary Aerosol) project was launched in 2019 with the major objective of identifying specific properties of the fine atmospheric aerosol from combustion sources that are responsible for toxicological effects and can be used as new metrics for health-related outdoor pollution studies. In this paper, we present the overall methodology of RHAPS and introduce the phenomenology and the first data observed. A comprehensive physico-chemical aerosol characterization has been achieved by means of high-time resolution measurements (e.g., number size distributions, refractory chemical components, elemental composition) and low-time resolution analyses (e.g., oxidative potential, toxicological assays, chemical composition). Preliminary results indicate that, at the real atmospheric conditions observed (i.e., daily PM1 from less than 4 to more than 50 μg m−3), high/low mass concentrations of PM1, as well as black carbon (BC) and water soluble Oxidative Potential (WSOP,) do not necessarily translate into high/low toxicity. Notably, these findings were observed during a variety of atmospheric conditions and aerosol properties and with different toxicological assessments. Findings suggest a higher complexity in the relations observed between atmospheric aerosol and toxicological endpoints that go beyond the currently used PM1 metrics. Finally, we provide an outlook to companion papers where data will be analyzed in more detail, with the focus on source apportionment of PM1 and the role of source emissions on aerosol toxicity, the OP as a predictive variable for PM1 toxicity, and the related role of SOA possessing redox-active capacity, exposure-response relationships for PM1, and air quality models to forecast PM1 toxicity. [ABSTRACT FROM AUTHOR]

Atmospheric visibility is an important indicator that reflects the transparency of the atmosphere and characterizes the air quality, so it is of great significance to study the long-term change in visibility. This paper is based on the global surface summary of day data (GSOD) site dataset and other relevant data, using the Mann–Kendall (MK) mutation point test, wavelet transform, and seasonal autoregressive integrated moving average (SARIMA) model forecasting. The time-frequency domain variation characteristics and related influencing factors of regional visibility in China were studied in detail, and the visibility was predicted; the results of the study showed the following: (1) the overall interannual variation of regional visibility in China has a decreasing trend, and the four-season variation has a decreasing trend, except for the rising trend in summer, with abrupt change points in both the overall interannual variation and the four-season variation. (2) There are main cycles of visibility in the Chinese region with time scales of 180 months and 18 months. Under the time scale of 180 months for the main cycle, the variation period of visibility is about 123 months, experiencing two high to low variations; under the time scale of 18 months for the main cycle, the variation period of visibility is 12 months, experiencing 21 high to low variations. (3) The development of the economy indirectly affects changes in visibility. Cities with high economies are densely populated, with concentrations of various particulate emissions and high concentrations of particulate matter, which can directly reduce visibility. (4) Two prediction models, SARIMA and long and the short-term memory (LSTM) neural network, were used to predict the visibility in China, both of which achieved good evaluation indexes, and the visibility in China may show an increasing trend in the future. [ABSTRACT FROM AUTHOR]

Aerobiological predictive model development is of increasing interest, despite the distribution and variability of data and the limitations of statistical methods making it highly challenging. The use of concentration thresholds and models, where a binary response allows one to establish the occurrence or non-occurrence of the threshold, have been proposed to reduce difficulties. In this paper, we use logistic regression (logit) and regression trees to predict the daily concentration thresholds (low, medium, high, and very high) of six airborne fungal spore taxa (Alternaria, Cladosporium, Agaricus, Ganoderma, Leptosphaeria, and Pleospora) in eight localities in Catalonia (NE Spain) using data from 1995 to 2014. The predictive potential of these models was analyzed through sensitivity and specificity. The models showed similar results regarding the relationship and influence of the meteorological parameters and fungal spores. Ascospores showed a strong relationship with precipitation and basidiospores with minimum temperature, while conidiospores did not indicate any preferences. Sensitivity (true-positive) and specificity (false-positive) presented highly satisfactory validation results for both models in all thresholds, with an average of 73%. However, seeing as logit offers greater precision when attempting to establish the exceedance of a concentration threshold and is easier to apply, it is proposed as the best predictive model. [ABSTRACT FROM AUTHOR]

The decline of sea ice in the Arctic region is a critical indicator of rapid global warming and can also influence the feedback processes in the Arctic, so the prediction of sea ice extent and thickness plays an important role in climate modeling and prediction. This paper uses machine learning methods to predict the sea ice extent, and by adjusting the methods and factors, which include the climate variables, the past sea ice extent, and the simple linear-regression-simulated sea ice extent, then we found the best combination to give the result with the highest R2 score. We noticed that with longer periods of past sea ice extent data and shorter periods of climate data, the results appeared to be better. This might be related to the difference in climate and ocean memory. The sub-region sea ice extent prediction shows that the regions with whole-year ice cover are easier to predict and that those regions with sudden weather changes and significant seasonal variability appear to have lower R2 scores in the sea ice extent prediction. [ABSTRACT FROM AUTHOR]

Particulate matter (PM) in the air can cause various health problems and diseases in humans. In particular, the smaller size of PM 2.5 enable them to penetrate deep into the lungs, causing severe health impacts. Exposure to PM 2.5 can result in respiratory, cardiovascular, and allergic diseases, and prolonged exposure has also been linked to an increased risk of cancer, including lung cancer. Therefore, forecasting the PM 2.5 concentration in the surrounding is crucial for preventing these adverse health effects. This paper proposes a method for forecasting the PM 2.5 concentration after 1 h using bidirectional long short-term memory (Bi-LSTM). The proposed method involves selecting input variables based on the feature importance calculated by random forest, classifying the data to assign weight variables to reduce bias, and forecasting the PM 2.5 concentration using Bi-LSTM. To compare the performance of the proposed method, two case studies were conducted. First, a comparison of forecasting performance according to preprocessing. Second, forecasting performance between deep learning (long short-term memory, gated recurrent unit, and Bi-LSTM) and conventional machine learning models (multi-layer perceptron, support vector machine, decision tree, and random forest). In case study 1, The proposed method shows that the performance indices (RMSE: 3.98%p, MAE: 5.87%p, RRMSE: 3.96%p, and R 2 :0.72%p) are improved because weights are given according to the input variables before the forecasting is performed. In case study 2, we show that Bi-LSTM, which considers both directions (forward and backward), can effectively forecast when compared to conventional models (RMSE: 2.70, MAE: 0.84, RRMSE: 1.97, R 2 : 0.16). Therefore, it is shown that the proposed method can effectively forecast PM 2.5 even if the data in the high-concentration section is insufficient. [ABSTRACT FROM AUTHOR]

In this paper, we propose different explicable forecasting approaches, based on inductive and evolutionary decision rules, for extreme low-visibility events prediction. Explicability of the processes given by the rules is in the core of the proposal. We propose two different methodologies: first, we apply the PRIM algorithm and evolution to obtain induced and evolved rules, and subsequently these rules and boxes of rules are used as a possible simpler alternative to ML/DL classifiers. Second, we propose to integrate the information provided by the induced/evolved rules in the ML/DL techniques, as extra inputs, in order to enrich the complex ML/DL models. Experiments in the prediction of extreme low-visibility events in Northern Spain due to orographic fog show the good performance of the proposed approaches. [ABSTRACT FROM AUTHOR]

Wind power has great potential in the fields of electricity generation, heating, et cetera, and the precise forecasting of wind speed has become the key task in an effort to improve the efficiency of wind energy development. Nowadays, many existing studies have investigated wind speed prediction, but they often simply preprocess raw data and also ignore the nonlinear features in the residual part, which should be given special treatment for more accurate forecasting. Meanwhile, the mainstream in this field is point prediction which cannot show the potential uncertainty of predicted values. Therefore, this paper develops a two-stage decomposition ensemble interval prediction model. The original wind speed series is firstly decomposed using a complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and the decomposed subseries with the highest approximate entropy is secondly decomposed through singular-spectrum analysis (SSA) to further reduce the complexity of the data. After two-stage decomposition, auto-encoder dimensionality reduction is employed to alleviate the accumulated error problem. Then, each reconstructed subsequence will generate an independent prediction result using an elastic neural network. Extreme gradient boosting (Xgboost) is utilized to integrate the separate predicted values and also carry out the error correction. Finally, the Gaussian process (GP) will generate the interval prediction result. The case study shows the best performance of the proposed models, not only in point prediction but also in interval prediction. [ABSTRACT FROM AUTHOR]

In this paper, the average monthly temperature of the Karachi region, Pakistan, has been modelled. The time period of the procured dataset is from January 1989 to December 2018. The Autoregressive Integrated Moving Average (ARIMA) modelling technique in conjunction with the Box–Jenkins approach has been applied to forecast the average monthly temperature of the study area. A total of 83.33% of the trained dataset is used for construction of the model, and the remaining 16.67% of the dataset is used for the validation of the model. The best-fitted model is identified as ARIMA (2, 1, 4), generated on the basis of minimum values of the Akaike Information Criterion (AIC) and Bayesian Information Criterion (BIC) procedures. The accuracy parameters considered are Root Mean Square Error (RMSE) and Mean Absolute Error (MAE). Both parameters show that the model is 98.152% and 98.413% accurate, respectively. In addition, the Autoregressive Conditional Heteroscedasticity-Lagrange Multiplier (ARCH-LM) test has been conducted to check the presence of heteroscedasticity in the residuals of the identified model. This test shows no heteroscedasticity present in the residual series. By means of Autocorrelation Function (ACF) and Partial Autocorrelation Function (PACF) plots, the most appropriate orders of the ARIMA model are determined and evaluated. The model has been employed to investigate the time series variables' precise impact on the scale of the regional warming scenario. Accordingly, the created model can help in determining future strategies related to weather conditions in the Karachi region. From the forecast result, it is found that the average temperature seems to show an increasing trend. Such an increasing trend can potentially upset the weather conditions and economic activities of the coastal area of Pakistan. [ABSTRACT FROM AUTHOR]

Tropical cyclones are one of the most powerful and destructive weather systems on Earth. Accurately forecasting the landing time, location and moving paths of tropical cyclones are of great significance to mitigate the huge disasters it produces. However, with the continuous accumulation of meteorological monitoring data and the application of multi-source data, traditional tropical cyclone track forecasting methods face many challenges in forecasting accuracy. Recently, deep learning methods have proven capable of learning spatial and temporal features from massive datasets. In this paper, we propose a new spatiotemporal deep learning model for tropical cyclone track forecasting, which adopts spatial location and multiple meteorological factors to forecast the tracks of tropical cyclones. The model proposes a multi-layer ConvGRU to extract the nonlinear spatial features of tropical cyclones, while Spatial and Channel Attention Mechanism (CBAM) is adopted to overcome the large-scale problem of high response isobaric surface affecting the tropical cyclones. Meanwhile, this model utilizes a Deep and Cross framework to combine the traditional CNN model with the multi-ConvGRU model. Experiments were conducted on the China Meteorological Administration Tropical Cyclone Best Track Dataset (CMA) from 2000 to 2020, and the EAR-Interim dataset provided by the European Centre for Medium-Range Weather Forecasts (ECMWF). The experimental results show that the proposed model is superior to the deep learning tropical cyclone forecasting methods. [ABSTRACT FROM AUTHOR]

A precise air pollution forecast is the basis for targeted pollution control and sustained improvements in air quality. It is desirable and crucial to select the most suitable model for air pollution forecasting (APF). To achieve this goal, this paper provides a comprehensive evaluation of performances of different models in simulating the most common air pollutants (e.g., PM2.5, NO2, SO2, and CO) in Guangzhou (23.13° N, 113.26° E), China. To simulate temporal variations of the above-mentioned air pollutant concentrations in Guangzhou in September and October 2020, we use a numerical forecasting model (i.e., the Weather Research and Forecasting model with Chemistry (WRF-Chem)) and two artificial intelligence models (i.e., the back propagation neural network (BPNN) model and the long short-term memory (LSTM) model). WRF-Chem is also used to simulate the meteorological elements (e.g., the 2 m temperature (T2), 2 m relative humidity (RH), and 10 m wind speed and direction (WS, WD)). In order to investigate the simulation accuracies of classical APF models, we simultaneously compare the simulations of the WRF-Chem, BPNN, and LSTM models to ground truth observations. Comparative assessment results show that WRF-Chem simulated air pollutant (i.e., PM2.5, NO2, SO2, and CO) concentrations have the best correlations with ground measurements (i.e., Pearson correlation coefficient R = 0.88, 0.73, 0.61, and 0.61, respectively). Furthermore, to evaluate model performance in terms of accuracy and stability, the normalized mean bias (NMB, %) and mean fractional bias (MFB, %) are adopted as the standard performance metrics (SPMs) proposed by Boylan et al. The comparison results indicate that when simulating PM2.5, WRF-Chem was more effective than the BPNN but less effective than the LSTM. While simulating concentrations of NO2, SO2, and CO, the WRF-Chem model performed better than the BPNN and LSTM models. With regards to WRF-Chem, the NMBs and MFBs for the PM2.5 simulations are, respectively, 6.49% and 0.02%, –11.96% and –0.031% for NO2, 7.93% and 0.019% for CO, and 5.04% and 0.012% for SO2. Our results suggest that WRF-Chem has superior performance and better accuracy than the NN-based prediction models, making it a promising and useful tool to accurately predict and forecast regional air pollutant concentrations on a city scale. [ABSTRACT FROM AUTHOR]

Pavement temperature is the main factor determining road icing, and accurate and timely pavement temperature prediction is of significant importance to regional traffic safety management and preventive maintenance. The prediction of pavement temperature at the micro-scale has been a challenge to be tackled. To solve this problem, a bidirectional extended short-term memory network model based on the attention mechanism (Att-BiLSTM) was proposed to improve the prediction performance by using the time series features of pavement temperature and meteorological factors. Pavement temperature data and climatic data were collected from a road weather station in Yunnan, China. The results show that the MAE, MSE, and MAPE of the proposed Att-BiLSTM model were 0.330, 0.339, and 10.1%, respectively, which were better than the other baseline models. It was shown that 93.4% of the predicted values had an error less than 1 °C, and 82.1% had an error less than 0.5 °C, indicating that the proposed Att-BiLSTM model enables significant performance improvement. In addition, this paper quantified and analyzed the effects of parameters such as the size of the sliding window, the number of hidden layer neurons, and the optimizer on the performance of the prediction model. [ABSTRACT FROM AUTHOR]

To overcome the limitations of long-term prediction of PM2.5 concentration, a multi-factor information flow causality analysis method is used to screen suitable meteorological and air pollutant-related factors and concatenate them with a PM2.5 sequence as the dataset. A modal decomposition algorithm is used as a module to be integrated into the autoformer (transformer improved with autocorrelation mechanism) model to improve it, and the modal autoformer (empirical modal decomposition combined with autoformer) is proposed. The constructed model decomposes the sequence into several components by using the modal decomposition module and uses the self-correlation mechanism and decomposition structure to decompose and extract features of different components at the time-feature level. Based on the matching method, the model is adjusted for different component features to improve the long-term prediction effect. The model is applied to three cities in Henan Province, Zhengzhou, Luoyang, and Zhumadian, as examples for experiments, and gated neural unit (GRU), informer, autoformer, and modal GRU (empirical modal decomposition combined with GRU model) are constructed for comparative verification. The results show that the modal autoformer can better cope with the complex characteristics of long-term prediction of the PM2.5 time series, has strong spatial adaptability and that its various indicators are optimal for the three cities, with R2 values being all above 0.96, where the highest is 0.987 in Zhengzhou; MAPE (Mean absolute percentage error) values all being less than 10, where the best is 7.602 in Zhumadian; and MAE (Mean absolute error) values all being less than 4. The prediction effect is stable enough, showing its feasibility and adaptability in long-term prediction. [ABSTRACT FROM AUTHOR]

It is very important to analyze the performance of the model rainstorm forecast for understanding the intensity and position deviation of the model precipitation and improving the forecast ability. This paper uses classical scoring and the MODE (Method for Object-Based Diagnostic Evaluation) method to evaluate the forecast performance of different products. The forecast and observation data used in the article mainly include CMA (China Meteorological Administration) multi-source merged precipitation analysis, the precipitation forecast of ECMWF (European Centre for Medium-Range Weather Forecasts), CMA-Meso (Mesoscale model forecast of CMA) and SCMOC (National Meteorological Center grid precipitation forecast guidance product) data. At the same time, the possible correction method of heavy rainfall area is explored by using the high and low-level circulation configuration of the ECMWF model. The main conclusions are as follows: ① MODE spatial verification shows that the number, intensity, area and location of ECMWF rainstorm precipitation objects match the observed precipitation best, which is obviously better than SCMOC and CMA-Meso precipitation forecasts. There are significantly fewer SCMOC rainstorm precipitation objects, and the area of each single precipitation object is significantly larger, which often fails to report the small area objects of convective precipitation. ② The reason for the high TS score of SCMOC is that it reduces the number of small area rainstorm objects and avoids the "double punishment" phenomenon caused by position forecast error, which leads to the failure of SCMOC in local rainstorm forecasts. ③ Analyzing the relationship between the circulation situation of the ECMWF model and the location of rainstorm forecasts by the model, it is found that the location of the rainstorm area is consistent with the upper circulation system, especially with the strong rising area of the vertical velocity of 700 hPa and the high value area of the specific humidity of 850 hPa. When the rainstorm area coincides with the upper air system but is not consistent with the ground convergence area and the high value area of velocity potential, the rainstorm location often has a large deviation. The location of the surface convergence area can be used as a reference to improve the performance of the rainstorm forecast. [ABSTRACT FROM AUTHOR]

Seasonal forecasting systems still have difficulties predicting temperature over continental regions, while their performance is better over some maritime regions. On the other hand, the land surface is a substantial source of (sub-)seasonal predictability. A crucial land surface component in focus here is the snow cover, which stores water and modulates the surface radiation balance. This paper's goal is to attribute snow cover seasonal forecasting biases and lack of skill to either initialization or parameterization errors. For this purpose, we compare the snow representation in five seasonal forecasting systems (from DWD, ECMWF, Météo-France, CMCC, and ECCC) and their performances in predicting snow and 2-m temperature over a Siberian region against ERA5 reanalysis and station data. Although all systems use similar atmospheric and land initialization approaches and data, their snow and temperature biases differ in sign and amplitude. Too-large initial snow biases persist over the forecast period, delaying and prolonging the melting phase. The simplest snow scheme (used in DWD's system) shows too-early and fast melting in spring. However, systems including multi-layer snow schemes (Météo-France and CMCC) do not necessarily perform better. Both initialization and parameterization are causes of snow biases, but, depending on the system, one can be more dominant. [ABSTRACT FROM AUTHOR]

Background: The generalized space-time autoregressive (GSTAR) model is one of the most widely used models for modeling and forecasting time series and location data. Methods: In the GSTAR model, there is an assumption that the research locations are heterogeneous. In addition, the differences between these locations are shown in the form of a weighting matrix. The novelty of this paper is that we propose the hybrid time-series model of GSTAR uses the cascade neural network and obtains the best parameters from particle swarm optimization. Results and conclusion: This hybrid model provides a high accuracy value for forecasting PM2.5, PM10, NOx, and SO2 with high accuracy forecasting, which is justified by a mean absolute percentage error (MAPE) accuracy of around 0.01%. [ABSTRACT FROM AUTHOR]

Machine learning (ML) has been utilized to predict climatic parameters, and many successes have been reported in the literature. In this paper, we scrutinize the effectiveness of five widely used ML algorithms in the monthly prediction of seasonal climatic parameters using monthly image data. Specifically, we quantify the predictive performance of these algorithms applied to five climatic parameters using various combinations of features. We compare the predictive accuracy of the resulting trained ML models to that of basic statistical estimators that are computed directly from the training data. Our results show that ML never significantly outperforms the statistical baseline, and underperforms for most feature sets. Unlike previous similar studies, we provide error bars for the relative performance of different predictors based on jackknife estimates applied to differences in predictive error magnitudes. We also show that the practice of shuffling data sequences which was employed in some previous references leads to data leakage, resulting in over-estimated performance. Ultimately, the paper demonstrates the importance of using well-grounded statistical techniques when producing and analyzing the results of ML predictive models. [ABSTRACT FROM AUTHOR]

Accurate short-term forecasting of intensive rainfall has high practical value but remains difficult to achieve. Based on deep learning and spatial–temporal sequence predictions, this paper proposes a hierarchical dynamic graph network. To fully model the correlations among data, the model uses a dynamically constructed graph convolution operator to model the spatial correlation, a recurrent structure to model the time correlation, and a hierarchical architecture built with graph pooling to extract and fuse multi-level feature spaces. Experiments on two datasets, based on the measured cumulative rainfall data at a ground station in Fujian Province, China, and the corresponding numerical weather grid product, show that this method can model various correlations among data more effectively than the baseline methods, achieving further improvements owing to reversed sequence enhancement and low-rainfall sequence removal. [ABSTRACT FROM AUTHOR]

Aviation turbulence remains one of the leading causes of weather-related aviation accidents. Therefore, turbulence prediction is a major concern of aviation forecasters. This paper describes the turbulence index ( TURB IPMA ) developed and used operationally at the Portuguese Institute of Sea and Atmosphere (IPMA), based on several diagnostics derived from ECMWF forecasts, using a new calibration approach. The forecast skill of the TURB IPMA and of individual diagnostics are evaluated using turbulence observations over the Portuguese Flight Information Regions and surrounding areas, for 12 months between February 2020 and March 2021 (excluding May and June). The forecasting skill of the predictors is discussed in terms of the Relative Operating Characteristic (ROC) curves, which is widely applied, but also in terms of novel measures such as the Symmetric Extremal Dependence Index (SEDI) and Symmetric Extreme Dependency Score (SEDS). The new measures are particularly relevant in assessing forecasts of rare events, such as moderate-or-greater turbulence. The operational index outperforms individual diagnostics (such as Ellrod) in terms of all verification measures. Furthermore, the use of a new Richardson number function was proven to be beneficial. Finally, the turbulence prediction by IPMA was comparable to that of the London WAFC for one turbulence episode. [ABSTRACT FROM AUTHOR]

The 2-m temperature is one of the important meteorological elements, and improving the accuracy of medium- and long-term forecasts of the 2-m temperature is important. The similarity forecasting method is widely used as a calibration technique in the statistical postprocessing of numerical weather prediction (NWP). In this study, the analogue ensemble averaging method is used to correct the deterministic forecast of the 2-m temperature with a forecast lead time from 180 h to 348 h using the CMA-GEPS model. The bias, mean absolute error (MAE), and root mean square error (RMSE) are used as the evaluation metrics. In comparison with NWP, the systematic error of the model for 2-m temperature is effectively reduced during each forecast period when using the analogue ensemble averaging method. In addition, the differences in forecast errors between regions are reduced, and the accuracy of 2-m temperature forecasts over complex terrain, especially in Southwest China, Northwest China, and North China, is improved using this method. In the future, there is certainly potential to apply the analogue ensemble averaging method to the bias correction of medium- and long-term forecasts of more meteorological elements. [ABSTRACT FROM AUTHOR]

The spatiotemporal forecasting of temperature is a critical issue in meteorological prediction, with significant implications for fields such as agriculture and energy. With the rapid advancement of data-driven deep learning methods, deep learning-based spatiotemporal sequence forecasting models have seen widespread application in temperature spatiotemporal forecasting. However, statistical analysis reveals that temperature evolution varies across temporal and spatial scales due to factors like terrain, leading to a lack of existing temperature prediction models that can simultaneously learn both large-scale global features and small to medium-scale local features over time. To uniformly model temperature variations across different temporal and spatial scales, we propose the Multi-Scale Large Kernel Spatiotemporal Attention Neural Network (MSLKSTNet). This model consists of three main modules: a feature encoder, a multi-scale spatiotemporal translator, and a feature decoder. The core module of this network, Multi-scale Spatiotemporal Attention (MSSTA), decomposes large kernel convolutions from multi-scale perspectives, capturing spatial feature information at different scales, and focuses on the evolution of multi-scale spatial features over time, encompassing both global smooth changes and local abrupt changes. The results demonstrate that MSLKSTNet achieves superior performance, with a 35% improvement in the MSE metric compared to SimVP. Ablation studies confirmed the significance of the MSSTA unit for spatiotemporal forecasting tasks. We apply the model to the regional ERA5-Land reanalysis temperature dataset, and the experimental results indicate that the proposed method delivers the best forecasting performance, achieving a 42% improvement in the MSE metric over the widely used ConvLSTM model for temperature prediction. This validates the effectiveness and superiority of MSLKSTNet in temperature forecasting tasks. [ABSTRACT FROM AUTHOR]

Previous studies on multi-model ensemble forecasting mainly focused on the weight allocation of each model, but did not discuss how to suppress the reduction of ensemble forecasting accuracy when adding poorer models. Based on a variant weight (VW) method and the equal weight (EW) method, this study explored this topic through theoretical and real case analyses. A theoretical proof is made, showing that this VW method can improve the forecasting accuracy of a multi-model ensemble, in the case of either the same models combination or adding an even worse model into the original multi-model ensemble, compared to the EW method. Comparative multi-model ensemble forecasting experiments against a real case between the VW and EW methods show that the forecasting accuracy of a multi-model ensemble applying the VW method is better than that of each individual model (including the model from the European Centre for Medium-Range Weather Forecasts). The 2 m temperature forecasting applying the VW method is superior to that applying the EW method for all the multi-model ensembles. Both theoretical proof and numerical experiments show that an improved forecast, better than a best model, is generally possible. [ABSTRACT FROM AUTHOR]

The advancement towards utilizing renewable energy sources is crucial for mitigating environmental issues such as air pollution and climate change. Offshore wind turbines, particularly floating offshore wind turbines (FOWTs), are developed to harness the stronger, steadier winds available over deep waters. Accurate metocean data forecasts, encompassing wind speed and wave height, are crucial for offshore wind farms' optimal placement, operation, and maintenance and contribute significantly to FOWT's efficiency, safety, and lifespan. This study examines the application of three machine learning (ML) models, including Facebook Prophet, Seasonal Autoregressive Integrated Moving Average with Exogenous Factors (SARIMAX), and long short-term memory (LSTM), to forecast wind speeds and significant wave heights, using data from a buoy situated in the Pacific Ocean. The models are evaluated based on their ability to predict 1-, 3-, and 30-day future wind speed and wave height values, with performances assessed through Mean Absolute Error (MAE) and Root Mean Squared Error (RMSE) metrics. Among the models, LSTM displayed superior performance, effectively capturing the complex temporal dependencies in the data. Incorporating exogenous variables, such as atmospheric conditions and gust speed, further refined the predictions.The study's findings highlight the potential of machine learning (ML) models to enhance the integration and reliability of renewable energy sources through accurate metocean forecasting. [ABSTRACT FROM AUTHOR]

Approaching precipitation forecast refers to the prediction of precipitation within a short time scale, which is usually regarded as a spatiotemporal sequence prediction problem based on radar echo maps. However, due to its reliance on single-image prediction, it lacks good capture of sudden severe convective events and physical constraints, which may lead to prediction ambiguities and issues such as false alarms and missed alarms. Therefore, this study dynamically combines meteorological elements from surface observations with upper-air reanalysis data to establish complex nonlinear relationships among meteorological variables based on multisource data. We design a Residual Spatiotemporal Convolutional Network (ResSTConvNet) specifically for this purpose. In this model, data fusion is achieved through the channel attention mechanism, which assigns weights to different channels. Feature extraction is conducted through simultaneous three-dimensional and two-dimensional convolution operations using a pure convolutional structure, allowing the learning of spatiotemporal feature information. Finally, feature fitting is accomplished through residual connections, enhancing the model's predictive capability. Furthermore, we evaluate the performance of our model in 0–3 h forecasting. The results show that compared with baseline methods, this network exhibits significantly better performance in predicting heavy rainfall. Moreover, as the forecast lead time increases, the spatial features of the forecast results from our network are richer than those of other baseline models, leading to more accurate predictions of precipitation intensity and coverage area. [ABSTRACT FROM AUTHOR]

The concentration series of PM2.5 (particulate matter ≤ 2.5 μm) is nonlinear, nonstationary, and noisy, making it difficult to predict accurately. This paper presents a new PM2.5 concentration prediction method based on a hybrid model of complete ensemble empirical mode decomposition with adaptive noise (CEEMDAN) and bi-directional long short-term memory (BiLSTM). The new method was applied to predict the same kind of particulate pollutant PM10 and heterogeneous gas pollutant O3, proving that the prediction method has strong generalization ability. First, CEEMDAN was used to decompose PM2.5 concentrations at different frequencies. Then, the fuzzy entropy (FE) value of each decomposed wave was calculated, and the near waves were combined by K-means clustering to generate the input sequence. Finally, the combined sequences were put into the BiLSTM model with multiple hidden layers for training. We predicted the PM2.5 concentrations of Seoul Station 116 by the hour, with values of the root mean square error (RMSE), the mean absolute error (MAE), and the symmetric mean absolute percentage error (SMAPE) as low as 2.74, 1.90, and 13.59%, respectively, and an R2 value as high as 96.34%. The "CEEMDAN-FE" decomposition-merging technology proposed in this paper can effectively reduce the instability and high volatility of the original data, overcome data noise, and significantly improve the model's performance in predicting the real-time concentrations of PM2.5. [ABSTRACT FROM AUTHOR]

The prediction of typhoon tracks in the Northwest Pacific is key to reducing human casualties and property damage. Traditional numerical forecasting models often require substantial computational resources, are high-cost, and have significant limitations in prediction speed. This research is dedicated to using deep learning methods to address the shortcomings of traditional methods. Our method (AFR-SimVP) is based on a large-kernel convolutional spatio-temporal prediction network combined with multi-feature fusion for forecasting typhoon tracks in the Northwest Pacific. In order to more effectively suppress the effect of noise in the dataset to enhance the generalization ability of the model, we use a multi-branch structure, incorporate an atmospheric reconstruction subtask, and propose a second-order smoothing loss to further improve the prediction ability of the model. More importantly, we innovatively propose a multi-time-step typhoon prediction network (HTAFR-SimVP) that does not use the traditional recurrent neural network family of models at all. Instead, through fine-to-coarse hierarchical temporal feature extraction and dynamic self-distillation, multi-time-step prediction is achieved using only a single regression network. In addition, combined with atmospheric field reconstruction, the network achieves integrated prediction for multiple tasks, which greatly enhances the model's range of applications. Experiments show that our proposed network achieves optimal performance in the 24 h typhoon track prediction task. Our regression network outperforms previous recurrent network-based typhoon prediction models in the multi-time-step prediction task and also performs well in multiple integration tasks. [ABSTRACT FROM AUTHOR]

As a significant source of anthropogenic greenhouse gas emissions, the municipal solid waste sector's greenhouse gas emission mode remains unknown, hampering effective decision-making on possible greenhouse gas emission reductions. Rapid urbanization and economic growth have resulted in massive volumes of municipal solid trash. As a result, identifying emission reduction routes for municipal solid waste treatment is critical. In this research, we investigate the potential of municipal solid waste treatment methods in lowering greenhouse gas (GHG) emissions in Shenzhen, a typical Chinese major city. The results showed that the combined treatment of 58% incineration, 2% landfill, and 40% anaerobic digestion (AD) had the lowest greenhouse gas emissions of about 5.91 million tons under all scenarios. The implementation of waste sorting and anaerobic digestion treatment of organic municipal solid waste after separate collection can reduce greenhouse gas emissions by simply increasing the incineration ratio. [ABSTRACT FROM AUTHOR]

Forecasting air quality plays a crucial role in preventing and controlling air pollution. It is particularly significant for improving preparedness for heavily polluted weather conditions and ensuring the health and safety of the population. In this study, a novel deep learning model for predicting air quality spatio-temporal variations is introduced. The model, named graph long short-term memory with multi-head attention (GLSTMMA), is designed to capture the temporal patterns and spatial relationships within multivariate time series data related to air quality. The GLSTMMA model utilizes a hybrid neural network architecture to effectively learn the complex dependencies and correlations present in the data. The extraction of spatial features related to air quality involves the utilization of a graph convolutional network (GCN) to collect air quality data based on the geographical distribution of monitoring sites. The resulting graph structure is imported into a long short-term memory (LSTM) network to establish a Graph LSTM unit, facilitating the extraction of temporal dependencies in air quality. Leveraging a Graph LSTM unit, an encoder-multiple-attention decoder framework is formulated to enable a more profound and efficient exploration of spatio-temporal correlation features within air quality time series data. The research utilizes the 2019–2021 multi-source air quality dataset of Qinghai Province for experimental assessment. The results indicate that the model effectively leverages the impact of multi-source data, resulting in optimal accuracy in predicting six air pollutants. [ABSTRACT FROM AUTHOR]

Air pollution poses a significant threat to human health and ecosystems. Forecasting the concentration of key pollutants like particulate matter can help support air quality planning and prevention measures. Deep learning methods are becoming increasingly popular for predicting air pollution and particulate matter concentration. Architectures like Convolutional Neural Networks can effectively account for the geographical features of the study domain. This work tests a Feed-Forward, a Long Short-Term Memory (LSTM), and a Convolutional Neural Network (CNN) on a polluted geographical domain in northern Italy. The best convolutional architecture was then implemented in two other quite different regions. The results show that the same CNN architecture provides remarkably accurate forecasts in all applications and that a network trained on PM10 data can accurately forecast PM2.5 concentrations up to 10 days ahead. These results suggest that the proposed CNN has high generalization capabilities and can thus be reliably used as a forecasting model for different areas. [ABSTRACT FROM AUTHOR]

Tropical cyclone rapid intensification (RI) prediction still remains a big international challenge in numerical weather prediction. Hurricane Matthew (2016) underwent extreme and non-classic RI, intensifying from a Category 1 storm to a Category 5 hurricane within 24 h under a strong vertical shear environment. However, most models failed to capture this RI, and limited or no inner core, and outflow observations were assimilated in the NWS operational HWRF Model before the onset of RI for Matthew (2016). The goals of the study are to (1) explore the best way to assimilate the High-Density Observations (HDOB, including FL and SFMR) and AMV data; (2) study the impact of assimilating these observations on the analysis of both the inner-core and outflow structures; and (3) examine the impact of assimilating these data on the prediction of RI for Matthew. The main results are as follows: (1) With proper pre-processing of the HDOB observations and by using a 4DEnVar method, the inner-core structure analysis was improved. And the RI prediction is more consistent with the best track without spin-down for the first 24 h. Assimilating CIMMS AMV observations on top of the HDOB observations further improves both the track and intensity forecasts. Specifically, both the magnitude and timing of the peak intensity are further improved. (2) Diagnostics are conducted to understand how the assimilation of these different types of observations impacts RI prediction. Without assimilating HODB and AMV data, baseline experimentover-predict the intensification rate during the first 18 h, but under-predict RI after 18 h. However, the assimilation of FL and SFMR and CIMMS AMV correctly weakens the upper-level outflow and improves the shear-relative structure of the inner-core vortex, such as reducing the low-level moisture in the downshear left quadrant. The deep convection on the downshear side is weaker than baseline for the first 18 h but keeps enhancing, later moving cyclonically to the USL quadrant, and then causes more subsidence warming, maximizing in the USL quadrant and the maximum wind increases faster. Moreover, the rapid intensification rate is much more consistent with the best track and the forecast skill of RI is improved. Therefore, 4DEnVar assimilation with proper pre-processing of the high-density observations can indeed correct the shear-relative moisture and structural distributions of both the inner core and environment for TCs imbedded in the stronger shear, which is important for shear-TC RI prediction. [ABSTRACT FROM AUTHOR]

Due to the complexity and uncertainty of meteorological systems, traditional precipitation forecasting methods have certain limitations. Therefore, based on the common characteristics of meteorological data, a precipitation forecasting model named MultiPred is proposed, with the goal of continuously predicting precipitation for 4 h in a specific region. This model combines the multimodal fusion method with recursive spatiotemporal prediction models. The training and testing process of the model roughly involves using spatial feature extraction networks and temporal feature extraction networks to generate preliminary predictions for multimodal data. Subsequently, a modal fusion layer is employed to further extract and fuse the spatial features of the preliminary predictions from the previous step, outputting the predicted precipitation values for the target area. Experimental tests and training were conducted using ERA5 multi-meteorological modal data and GPM satellite precipitation data from 2017 to 2020, covering longitudes from 110° to 122° and latitudes from 20° to 32°. The training set used data from the first three years, while the validation set and test set each comprised 50% of the data from the fourth year. The initial learning rate for the experiment was set to 1 × 10−4, and training was performed for 1000 epochs. Additionally, the training process utilized a loss function composed of Mean Absolute Error (MAE), Mean Squared Error (MSE), and Structural Similarity Index (SSIM). The model was evaluated using the Critical Success Index (CSI), Probability of Detection (POD), and the Heidke Skill Score (HSS). Experimental results demonstrate that MultiPred excels in precipitation forecasting, particularly for light precipitation events with amounts greater than or equal to 0.1 mm and less than 2 mm. It achieves optimal performance in both light and heavy precipitation forecasting tasks. [ABSTRACT FROM AUTHOR]

The PM 2.5 concentration model is the key to predict PM 2.5 concentration. During the prediction of atmospheric PM 2.5 concentration based on prediction model, the prediction model of PM 2.5 concentration cannot be usually accurately described. For the PM 2.5 concentration model in the same period, the dynamic characteristics of the model will change under the influence of many factors. Similarly, for different time periods, the corresponding models of PM 2.5 concentration may be different, and the single model cannot play the corresponding ability to predict PM 2.5 concentration. The single model leads to the decline of prediction accuracy. To improve the accuracy of PM 2.5 concentration prediction in this solution, a multiple model adaptive unscented Kalman filter (MMAUKF) method is proposed in this paper. Firstly, the PM 2.5 concentration data in three time periods of the day are taken as the research object, the nonlinear state space model frame of a support vector regression (SVR) method is established. Secondly, the frame of the SVR model in three time periods is combined with an adaptive unscented Kalman filter (AUKF) to predict PM 2.5 concentration in the next hour, respectively. Then, the predicted value of three time periods is fused into the final predicted PM 2.5 concentration by Bayesian weighting method. Finally, the proposed method is compared with the single support vector regression-adaptive unscented Kalman filter (SVR-AUKF), autoregressive model-Kalman (AR-Kalman), autoregressive model (AR) and back propagation neural network (BP). The prediction results show that the accuracy of PM 2.5 concentration prediction is improved in whole time period. [ABSTRACT FROM AUTHOR]

PM10 prediction has attracted special legislative and scientific attention due to its harmful effects on human health. Statistical techniques have the potential for high-accuracy PM10 prediction and accordingly, previous studies on statistical methods for temporal, spatial and spatio-temporal prediction of PM10 are reviewed and discussed in this paper. A review of previous studies demonstrates that Support Vector Machines, Artificial Neural Networks and hybrid techniques show promise for suitable temporal PM10 prediction. A review of the spatial predictions of PM10 shows that the LUR (Land Use Regression) approach has been successfully utilized for spatial prediction of PM10 in urban areas. Of the six introduced approaches for spatio-temporal prediction of PM10, only one approach is suitable for high-resolved prediction (Spatial resolution < 100 m; Temporal resolution ≼ 24 h). In this approach, based upon the LUR modeling method, short-term dynamic input variables are employed as explanatory variables alongside typical non-dynamic input variables in a non-linear modeling procedure. [ABSTRACT FROM AUTHOR]

Rain nowcasting is an essential part of weather monitoring. It plays a vital role in human life, ranging from advanced warning systems to scheduling open air events and tourism. A nowcasting system can be divided into three fundamental steps, i.e., storm identification, tracking and nowcasting. The main contribution of this work is to propose procedures for each step of the rain nowcasting tool and to objectively evaluate the performances of every step, focusing on two-dimension data collected from short-range X-band radars installed in different parts of Italy. This work presents the solution of previously unsolved problems in storm identification: first, the selection of suitable thresholds for storm identification; second, the isolation of false merger (loosely-connected storms); and third, the identification of a high reflectivity sub-storm within a large storm. The storm tracking step of the existing tools, such as TITAN and SCIT, use only up to two storm attributes, i.e., center of mass and area. It is possible to use more attributes for tracking. Furthermore, the contribution of each attribute in storm tracking is yet to be investigated. This paper presents a novel procedure called SALdEdA (structure, amplitude, location, eccentricity difference and a real difference) for storm tracking. This work also presents the contribution of each component of SALdEdA in storm tracking. The second order exponential smoothing strategy is used for storm nowcasting, where the growth and decay of each variable of interest is considered to be linear. We evaluated the major steps of our method. The adopted techniques for automatic threshold calculation are assessed with a 97% goodness. False merger and sub-storms within a cluster of storms are successfully handled. Furthermore, the storm tracking procedure produced good results with an accuracy of 99.34% for convective events and 100% for stratiform events. [ABSTRACT FROM AUTHOR]

In this paper, the sea surface temperature (SST) based statistical seasonal forecast model (S4CAST) is utilized to examine the spatial and temporal prediction skill of Sahel heavy and extreme daily precipitation events. As in previous studies, S4CAST points out the Mediterranean Sea and El Niño Southern Oscillation (ENSO) as the main drivers of Sahel heavy/extreme daily rainfall variability at interannual timescales (period 1982–2015). Overall, the Mediterranean Sea emerges as a seasonal short-term predictor of heavy daily rainfall (1 month in advance), while ENSO returns a longer forecast window (up to 3 months in advance). Regarding the spatial skill, the response of heavy daily rainfall to the Mediterranean SST forcing is significant over a widespread area of the Sahel. Contrastingly, with the ENSO forcing, the response is only significant over the southernmost Sahel area. These differences can be attributed to the distinct physical mechanisms mediating the analyzed SST-rainfall teleconnections. This paper provides fundamental elements to develop an operational statistical-seasonal forecasting system of Sahel heavy and extreme daily precipitation events. [ABSTRACT FROM AUTHOR]