Search

In this study, the nowcast models provided by the Python pySTEPS library were evaluated using radar derived rain rate data and the satellite product Split-Window Difference (SWD) based on GOES-16 data, focusing on central Mexico. Initially, we obtained a characterization of the rainfall that occurred in the region using the radar rain rate and the SWD. Subsequently the nowcasts were evaluated using both variables. Two nowcast models were employed from pySTEPS: Extrapolation and S-PROG. The results indicate that average SWD is below 2.5 K, 90 min before the onset of rainfall events, and, on average, the SWD is 2 K during rainfall events. The results from both nowcast models were accurate and produced similar results. The nowcasts performed better when SWD data were used as input, having an average Probability of Detection (PoD) above 70% and a False Alarm Rate (FAR) reaching 40% for the 15-min prediction. The nowcasts were less accurate using the radar rain rate as input for the 15-min forecast, where the PoD was maximum 70% and FAR reaching 40%. However, these nowcasts were more reliable during well-organized precipitation events. In this work, it was determined that the nowcast models provided by pySTEPS can provide valuable rain forecasts using GOES-16 satellite and radar data for the central Mexico region. [ABSTRACT FROM AUTHOR]

The recent development of satellite products for observing precipitation based on different technologies (microwaves, infrared, etc.) allows for near-real-time meteorological studies. The purpose of this article is to evaluate 11 satellite products (GHE, PDIR, IMERG-Early v6, IMERG-Late v6, CMORPH v0.x, CMORPH-RT v0.x, GSMaP-NRT v7, GSMaP-NRT-GC v7, GSMaP-NOW v7, GSMaP-NOW-GC v7, and DATABOURG) currently available and compare them to 2 ground-based radar networks (PANTHERE and OPERA) and the French rain-gauge network RADOME. Two case studies of intense precipitation over France (22 to 25 April 2022 and 24 to 29 June 2022) were selected. The radar estimations are closer to the RADOME observations than the satellite-based estimations, which tend to globally underestimate the precipitation amounts over the areas of interest while OPERA tends to strongly overestimate precipitation amounts during the June case study. The PANTHERE radar product and the carrier-to-noise product DATABOURG shows promising results. Near-real-time satellite products tend to have closer precipitation amounts to the reference dataset than satellite products with a shorter latency. The use of these datasets for nowcasting developments is plausible but further analyses must be conducted beforehand. [ABSTRACT FROM AUTHOR]

In this study, we applied an explainable machine learning technique based on the LightGBM method, a category of gradient boosting decision tree algorithm, to conduct a quantitative radar precipitation estimation and move to understand the underlying reasons for excellent estimations. By introducing 3D grid radar reflectivity data into the LightGBM algorithm, we constructed three LightGBM models, including 2D and 3D LightGBM models. Ten groups of experiments were carried out to compare the performances of the LightGBM models with traditional Z–R relationship methods. To further assess the performances of the LightGBM models, rainfall events with 11,483 total samples during August-September of 2022 were used for statistical analysis, and two heavy rainfall events were specifically chosen for the spatial distribution evaluation. The results from both the statistical analysis and spatial distribution demonstrate that the performance of the LightGBM 3D model with nine points is the best method for quantitative precipitation estimation in this study. Through analyzing the explainability of the LightGBM models from Shapley additive explanations (SHAP) regression values, it can be inferred that the superior performance of the LightGBM 3D model is mainly attributed to its consideration of the rain gauge station attributes, diurnal variation characteristics, and the influence of spatial offset. [ABSTRACT FROM AUTHOR]

The change in raindrop spectrum characteristics is an important factor affecting the accuracy of estimations of precipitation. The in-depth study of raindrop spectrum characteristics is of great interest for understanding precipitation process and improving quantitative radar precipitation estimation. In this paper, the raindrop size distributions at Longli (57913), Puding (57808) and Luodian (57916) stations in Guizhou were analyzed from the perspective of precipitation microphysical characteristics. The results showed that the raindrop size distribution was different among different regions. The correlation coefficients of the mass-weighted average diameter for the rain intensities at these three stations were 46.89%, 49.51%, and 47.03%, respectively, which were slightly lower than the normal correlation coefficients of the average volume diameter for the rain intensities: 67.80%, 71.28%, and 71.46%, respectively. Based on the data from the Guiyang weather radar, raindrop spectrometer, and automatic rain gauge, the dynamic Z-I relationship method and the LSTM neural network method were used to estimate precipitation. The correlation coefficients of the dynamic Z-I relationship method and the LSTM neural network method at the three stations studied were 0.8432, 0.7763, and 0.8658 and 0.8745, 0.9125, and 0.8676, respectively. Regarding the process of stratiform cloud precipitation, the correlation coefficients of the dynamic Z-I relationship method and LSTM neural network method at the three stations were 0.6933, 0.0902, and 0.1409 and 0.7114, 0.4984, and 0.4902, respectively. In the estimation of cumulative precipitation for 45 days from 1 July to 16 August 2020, the relative errors of the neural network estimation at the three stations were −4.25%, −11.35%, and −8.68% and the relative errors of the dynamic Z-I relationship estimation were −2.68%, −7.41%, and −21.23%, respectively. The final relative error of the neural network was slightly worse than that of the dynamic Z-I relationship in the cumulative precipitation estimations of Longli station and Puding station, but the overall correlation coefficients of the LSTM neural network method were better than those of the dynamic Z-I relationship method. [ABSTRACT FROM AUTHOR]

Ground based rainfall information is hardly available in most high mountain areas of the world due to the remoteness and complex topography. Thus, proper understanding of spatio-temporal rainfall dynamics still remains a challenge in those areas. Satellite-based rainfall products may help if their rainfall assessment are of high quality. In this paper, microwave-based integrated multi-satellite retrieval for the Global Precipitation Measurement (GPM) (IMERG) (MW-based IMERG) was assessed along with the random-forest-based rainfall (RF-based rainfall) and infrared-only IMERG (IR-only IMERG) products against the quality-controlled rain radar network and meteorological stations of high temporal resolution over the Pacific coast and the Andes of Ecuador. The rain area delineation and rain estimation of each product were evaluated at a spatial resolution of 11 km2 and at the time of MW overpass from IMERG. The regionally calibrated RF-based rainfall at 2 km2 and 30 min was also investigated. The validation results indicate different essential aspects: (i) the best performance is provided by MW-based IMERG in the region at the time of MW overpass; (ii) RF-based rainfall shows better accuracy rather than the IR-only IMERG rainfall product. This confirms that applying multispectral IR data in retrieval can improve the estimation of rainfall compared with single-spectrum IR retrieval algorithms. (iii) All of the products are prone to low-intensity false alarms. (iv) The downscaling of higher-resolution products leads to lower product performance, despite regional calibration. The results show that more caution is needed when developing new algorithms for satellite-based, high-spatiotemporal-resolution rainfall products. The radar data validation shows better performance than meteorological stations because gauge data cannot correctly represent spatial rainfall in complex topography under convective rainfall environments. [ABSTRACT FROM AUTHOR]

Cost-efficient single-polarized X-band radars are a feasible alternative due to their high sensitivity and resolution, which makes them well suited for complex precipitation patterns. The first horizontal scanning weather radar in Peru was installed in Piura in 2019, after the devastating impact of the 2017 coastal El Niño. To obtain a calibrated rain rate from radar reflectivity, we employ a modified empirical approach and draw a direct comparison to a well-established machine learning technique used for radar QPE. For both methods, preprocessing steps are required, such as clutter and noise elimination, atmospheric, geometric, and precipitation-induced attenuation correction, and hardware variations. For the new empirical approach, the corrected reflectivity is related to rain gauge observations, and a spatially and temporally variable parameter set is iteratively determined. The machine learning approach uses a set of features mainly derived from the radar data. The random forest (RF) algorithm employed here learns from the features and builds decision trees to obtain quantitative precipitation estimates for each bin of detected reflectivity. Both methods capture the spatial variability of rainfall quite well. Validating the empirical approach, it performed better with an overall linear regression slope of 0.65 and r of 0.82. The RF approach had limitations with the quantitative representation (slope = 0.44 and r = 0.65), but it more closely matches the reflectivity distribution, and it is independent of real-time rain-gauge data. Possibly, a weighted mean of both approaches can be used operationally on a daily basis. [ABSTRACT FROM AUTHOR]