Search

In this research, the magnesium ferrite/zinc oxide (MgFe2O4/ZnO) nanocomposite has been utilized as an effective adsorbent in the ultrasound-assisted dispersive solid-phase extraction (USA-DSPE) coupled to a spectrophotometric method for preconcentration of methylene blue (MB) and safranin O (SO) dyes. X-Ray diffraction (XRD), vibrating sample magnetometer (VSM), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FESEM) analyses were performed to characterize and confirm the properties of the synthesized MgFe2O4/ZnO nanocomposite. Box-Behnken design (BBD) based on response surface methodology (RSM) was utilized to optimize the variables. The results of this research showed that the maximum extraction efficiency was obtained at pH = 7, eluent volume of 140 µL, adsorbent amount of 1.53 mg, and ultrasonic time of 8 min. After optimization by RSM and using the Quadratic model, the extraction efficiency for MB and SO was 98.60% and 97.23%, respectively. The analysis of variance (ANOVA) showed that the data obtained from the experiment were consistent with the predicted model. Under optimal conditions, the calibration curve was linear in the range of 5–1000 µg/L (coefficient of determination of 0.9884) for MB and 10–1100 µg/L (coefficient of determination of 0.9973) for SO. The limit of detections (LOD) of the proposed method for MB and SO were determined as 1.5 µg/L and 3 µg/L, respectively. The relative standard deviations (RSD, n = 5) for MB and SO were obtained as 1.1% and 2.1%, respectively. The results of adsorbent recovery revealed that MgFe2O4/ZnO nanocomposite could be used several times without a significant adsorbent efficiency loss. Furthermore, the findings of interference studies revealed that the presence of different ions does not cause substantial interference with the extraction of dyes. The environmental water samples analysis showed that the extraction efficiency for dyes was in the range of 93.74–99.11%.

The main objective of the current assay was to fabricate a sophisticated and effective scaffold based on the nanofibrous structure in combination with the 3D structure of hydrogels for bone tissue engineering. In this scenario, we fabricated nanofibers using electrospinning and carbonized them. The processed nanofibers were added to the polymeric solution and cross-linked to embedded nanofibers into the 3D structure of hydrogel. The obtained constructs were characterized using the most relevant characterization techniques. The results showed that as-prepared nanofibers have a diameter of 185 ± 63 nm and some breakages and fusions in the nanofiber's structure are apparent. The electron microscopy showed that the obtained 3D structure has a porous architecture with interconnected pores that are beneficial for bone regeneration. The biological evaluations also showed that the fabricated 3D scaffold was hemocompatible, cytocompatible, and regenerated new bone tissue in an animal model. In conclusion, these results implied that the fabricated NFC-integrated 3D scaffold exhibited promising characteristics beneficial for bone regeneration and can be applied as the bone tissue engineering scaffold.

One of the current concerns to human health is antibiotic resistance, which promotes the use of antibiotics that are more harmful, expensive, and ineffective. In this condition, researchers are turning to innovative options to combat this alarming situation. Combining herbal medicine with nanotechnology has created a new strategy to increase the effectiveness of phytochemical compounds in overcoming antimicrobial resistance. Pistacia atlantica is one of the promising herbs with medicinal benefits, but its poor solubility in biological fluids is challenging. In this regard, we seek to evaluate the antibacterial efficacy of Pistacia atlantica extract-loaded nanovesicle. Cholesterol, Span 40, and Pluronic F127 modified nanoformulation was developed using an environmentally friendly improved heating technique, and it was evaluated for size distribution, zeta potential, morphology, entrapment efficiency (EE%), release behavior, stability, and antimicrobial performance. By using DLS, spherical nanovesicles were identified with a size distribution of 50–150 nm and a zeta potential of −43 mV. The extract's encapsulation efficiency was 72.03%. The developed loaded nanovesicles demonstrated controlled extract release in the tested 96 h and storage stability of at least 12 months at 25 °C. Also, Comparing the two samples, the encapsulated extract had greater antibacterial activity against Candida albicans, Staphylococcus aureus, and Pseudomonas plecoglossicida with MIC of 1320, 570, and 1100 µg/mL, respectively. Besides reducing the misuse of antibiotics by allowing for the controlled release of drugs made from natural sources, we expect the findings described here to help provide alternative plant-based formulations with greater stability and antibacterial activity.

In this manuscript, the sequel of agglomeration on the vibration of fiber metal laminated (FML) cylindrical shell in the micro phase using developed couple stress theory (MCST). Hamilton’s principle has been carried out for deriving the non-classical equations of motion of size-dependent thin micro cylindrical shell on the basis of Love’s first approximation theory. Mori-Tanaka and extended rule of mixture are utilized to estimate the mechanical attributes of carbon nanotubes (CNTs) and equivalent fiber, respectively. These four phases CNTs/fiber/polymer/metal laminated (CNTFPML) micro cylindrical shell is analyzed applying beam modal function model for several boundary limitations. Then, an investigation is performed to study the impacts of differing input parameters namely material length scale parameter, agglomeration, the distributions of agglomerated CNTs, the mass fraction of equivalent fiber and the volume fraction of CNTs on the frequency response of micro agglomerated CNTFPML cylindrical shell. The main output illustrated that the growth of frequencies is directly dependent to the increase of material length scale parameter for this agglomerated CNTFPML cylindrical shell so that through increasing the values of agglomeration parameters η and μ and material length scale parameter l altogether, the frequencies of this cylindrical shell grow.

In the novel SARS-CoV-2 (COVID-19) as a global emergency event, the main reason of the cardiac injury from COVID-19 is angiotensin-converting enzyme 2 (ACE2) targeting in SARS-CoV-2 infection. The inhibition of ACE2 induces an increase in the angiotensin II (Ang II) and the angiotensin II receptor type 1 (AT1R) leading to impaired cardiac function or cardiac inflammatory responses. The ethyl acetate fraction of Potentilla reptans L. root can rescue heart dysfunction, oxidative stress, cardiac arrhythmias and apoptosis. Therefore, isolated components of P. reptans evaluated to identify natural anti-SARS-CoV-2 agents via molecular docking.In silico molecular docking study were carried out using the Auto Dock software on the isolated compounds of Potentilla reptans root. The protein targets of selective ACE and others obtained from Protein Data Bank (PDB). The best binding pose between amino acid residues involved in active site of the targets and compounds was discovered via molecular docking. Furthermore, ADMET properties of the compounds were evaluated.The triterpenoids of P. reptans showed more ACE inhibitory potential than catechin in both domains. They were selective on the nACE domain, especially compound 5. Also, the compound 5 & 6 had the highest binding affinity toward active site of nACE, cACE, AT1R, ACE2, and TNF-α receptors. Meanwhile, compound 3 showed more activity to inhibit TXA2. Drug likeness and ADMET analysis showed that the compounds passed the criteria of drug likeness and Lipinski rules. The current study depicted that P. reptans root showed cardioprotective effect in COVID-19 infection and manipulation of angiotensin II-induced side effects.