Search

MnO2 has received immense consideration for supercapacitors; however, its performance in energy storage is limited by its low electroconductivity and agglomeration during the charge-discharge process. This necessitates the fabrication of flexible supercapacitor with excellent electrochemical properties for application in cable-type devices. In the current study, we have fabricated a self-standing carbonized cotton yarn (CCY) and the MnO2-based electrode by using a cotton yarn derived carbon fiber as a substrate. The electrode with hierarchical porous architecture was obtained through a redox reaction between CCY and potassium permanganate (KMnO4). Field emission scanning electron microscopy showed the deposition and uniform distribution of MnO2 nanoparticles on the surface of CCY. The electrode showed excellent capacity performance and electrochemical stability. In the electrode, the combination of MnO2 nanoparticles and CCY offered enhanced kinetics, a large surface area which resulted in high energy density (16.88 μWh/cm2) and high-power density (4770 μW/cm2). Further, the fabricated electrode showed a specific area capacity of 182.94 mF/m2 at 20 mV/s. Moreover, three flexible supercapacitors were connected in series and parallel to get higher working voltage and higher capacity, respectively, which demonstrated its potential for broad-spectrum applications in flexible devices, these results demonstrate the potential of MnO2/CCY for diverse applications in the development of cable-type devices.

Hollow Mo2C@C core-shell nanofibers (H-Mo2C@C/NFs) have been successfully synthesized via an integrated procedure including coaxial electrospinning, oil extraction and carbonization. As an anode of lithium-ion batteries, H-Mo2C@C/NFs delivers high discharge capacity of 1176.3 mA h g−1 in the first cycle at a current density of 0.1 A g−1 and exhibits good rate capability and reversibility. The capacity can maintain at 595.1 mA h g−1 even when the current density is up to 5 A g−1. In addition, at a high current density of 1 A g−1, H-Mo2C@C/NFs also displays extraordinary long-term cycling performance with a capacity of 674.4 mA h g−1. The excellent rate performance and cycling stability result from the synergistic effect of Mo2C nanoparticles and hollow structure nanofiber matrix. Coaxial electrospinning technology can be widely extended to manufacture other metal carbide/carbon composites to achieve important energy storage and other applications.

Biomass derived porous carbons are economic and attractive materials for anode electrodes in sodium-ion batteries. In this work, a novel porous carbon has been prepared through activation of longan shell, which demonstrates an interconnected hierarchical porosity comprised of macro-, meso- and micro-pores as well with a high specific surface area of 2990 m2 g−1. Benefiting from the unique pore structure and oxygen and nitrogen dual doping, a well-developed ionic and electronic conductivity is achieved. Remarkably, it exhibits an excellent cycling stability with a capacity up to 345.9 mAh g−1 at a current density of 0.1 A g−1, and maintains a capacity of 304.2 mAh g−1 even at a high current density of 5 A g−1 after 1000 cycles as anodes for sodium-ion batteries. These results indicate that the fabricated porous carbon could be a promising electrode material for sodium-ion batteries. The mechanism of such high sodium-ion storage was also discussed with the scan-rate-dependent CV curves to quantify the pseudo-capacitive contribution.

In this work, a MOF-derived Co-Fe oxide porous nanorod is introduced into the freestanding MXene film to produce a high-performance flexible electrode with excellent deformability and editability. The as-prepared composite film electrode demonstrates several advantages: MXene layer functions as a binder and conductive additive to coat Co-Fe oxide, which can effectively facilitate charge transfer and maintain the excellent flexibility of the film electrode. In the meantime, Co-Fe oxide can work as a spacer, thereby expanding the interlayer distance, improving the ion transmission path in the electrode. As a result, the optimal Co-Fe oxide/Ti3C2TX composite paper manifests a remarkable volumetric capacitance of 2467.6 F cm−3 in 1 M LiCl electrolyte. When assembled into a flexible symmetrical supercapacitor, an outstanding specific areal capacitance of 356.4 mF cm−2 can be obtained. Meanwhile, the flexible supercapacitor demonstrates excellent cycling performance with a high capacitance retention of 88.2% after 10 000 charge/discharge cycles, as well as stable electrochemical energy storage stability after 100 cycles of mechanical bending, indicating its great application potential in future flexible and portable energy storage equipment.

N-doped porous carbons (NPCs) prepared via carbonization of foam polymer materials and urea are promising anode materials of lithium-ion batteries (LIBs) for their low cost and high performance. Herein, polystyrene was mixed with Melanic Mc (5 wt%) and Azobisformamide (3 wt%) to prepared the precursors of porous carbon. NPCs with different N-doping levels were then obtained by the calcination of porous carbon/urea mixture with varied weight ratios. XPS and Raman characterizations illustrate that N-doping imposes negligible effects on the chemical states of N or C, but rather promotes the formation of disordered carbon and structural defects. BET measurement confirms that N-doping enlarges the surface area. The optimized NPCs with porous carbon/urea weight ratio of 1:5 exhibits high surface area of 508.3 m2·g−1 and the pore size is found to be around 3.66 nm. The capacities of NPCs achieve 600 mAh g−1 and 443 mAh g−1 over 200 cycles at 1 A g−1 and 5 A g−1 respectively. The excellent performance of NPC is ascribed to the enhanced surface area, defects and pores, providing abundant tunnels for lithium ion diffusion. Meanwhile, N-doping improves the electrical conductivity, which also enhances the rate performance. The facile synthetic route of NPCs as well as their excellent lithium storage performance shows great potential for the application in advanced lithium-ion batteries.

Polyacrylonitrile-based carbon fibers were functionalized with phenyl amine group via aryl diazonium reaction “on water” to improve their interfacial bonding with resin matrix. Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy were employed to characterize ordered degree, functional groups, chemical states and morphology of carbon fiber surface, respectively. The results showed that phenyl amine groups were grafted on the fiber surface successfully. Mechanical property test results indicated that the aryl diazonium reaction in this paper could improve the interfacial shear strength by 73%, while the tensile strength was down very slightly. Hence aryl diazonium reaction “on water” could be a facile green platform to functionalize carbon fibers for many interesting applications.

PAN-based carbon fibers (CF) were functionalized with generation (n) 1–3 dendritic hexamethylenetetramine (HMTA) (denoted as CF-Gn-HMTA, n = 1, 2 and 3) in an attempt to improve the interfacial properties between carbon fibers and epoxy matrix. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), dynamic contact angle analysis (DCA), interfacial shear strength (IFSS) and single fiber tensile testing were carried out to investigate the functionalization process of carbon fibers and the interfacial properties of the composites. Experimental results showed that generation (n) 1–3 dendritic hexamethylenetetramine was grafted uniformly on the fiber surface through the chemical reaction, and then it increased significantly the fiber surface polarity and roughness. The surface energy and IFSS of carbon fibers increased obviously after the graft CF-G3-HMTA, by 147.6% and 81%, respectively. Generation (n) 1–3 dendritic hexamethylenetetramine enhanced effectively the interfacial adhesion of the composites by improving resin wettability, increasing chemical bonding and mechanical interlocking, and the interfacial adhesion increased with dendritic generation number. Moreover, the grafting of generation (n) 1–3 dendritic hexamethylenetetramine on the carbon fiber surface improved the fiber tensile strength, which is beneficial to the in-plane properties of the resulting composites.