Search

[Display omitted] • OMC@NiO/Ni is synthesized via solvothermal reaction and subsequent calcination treatment. • "Trunk-leaf vein" structure endows OMC@NiO/Ni with superior electrochemical performance. • An asymmetric supercapacitor based on OMC@NiO/Ni and rGO/VO x as positive and negative electrodes respectively, is assembled. Supercapacitors are sustainable energy storage devices with the characteristics of high power density, long life span and ultrafast charge-discharge time. Herein, considering low conductivity of NiO and inspired by the "trunk-leaf vein" structure, mesoporous carbon and nickel dots are introduced into structure reacting as electron scaffold via facile hydrothermal and annealing procedures. Special hierarchical structure is obtained with oxygen modified mesoporous carbon (OMC) as core and NiO sheets as core accompanying with metallic nickel dots deposited on NiO sheets. Such "trunk-leaf vein" architecture can effectively ensure more active sites contacting with electrolyte, furthermore provide conductive scaffolds for electron transport. As expected, the OMC@NiO/Ni exhibits high specific capacitance of 651.3 F g−1 at 2 A g−1 and superior cycling life of 92.2% after 4000 cycles. Moreover, a novel negative electrode rGO/VO x is synthesized ascribe to the superior capacitance and life span. At last, an asymmetric device is assembled using OMC@NiO/Ni as positive electrode and rGO/VO x as negative electrode, which delivers maximum energy density of 44.3 Wh kg−1, high power density of 12,000 W kg−1 and excellent cycling life of 94.5% after 5000 cycles. The high performance of OMC@NiO/Ni renders it a potential material for energy storage-conversion equipments. [ABSTRACT FROM AUTHOR]

[Display omitted] • The composite was synthesized by a hydrothermal and vapor phase sulfidation method. • The hetrostruction and MXene improve the Na+ reaction kinetics. • The composite exhibits excellent rate and superior cycle stability. Molybdenum trioxide (MoO 3) is regarded as a promising material for rechargeable batteries attributed to its low cost, high theoretical capacity and eco-friendliness. Herein, N-doped carbon (NC) coated MoO 3 /MoS 2 composite decorated on MXene nanosheets (MoO 3 /MoS 2 /NC/MXene) has been synthesized by gas-phase vulcanization and coating of NC. The electrical conductivity and kinetics of ion diffusion/transport are greatly enhanced due to the vulcanization, NC coating and introduction of MXene. As a consequence, the composite exhibits high discharge capacity of 464 mAh/g at a current density of 0.1 A/g and still maintains a capacity of 202 mAh/g at a high current density of 5 A/g when used as the anode material for sodium-ion batteries. Furthermore, the electrode material still remains a high discharge capacity of 320 mAh/g with the capacity retention rate of nearly 100 % after 2000 cycles at a current density of 1 A/g. [ABSTRACT FROM AUTHOR]

Binary transition metal sulfides are considered to be promising electrode materials for high-performance supercapacitors because of their ultrahigh electron conductivity and superior electrochemical activity compared to the unitary transition metal sulfides. In this work, copper cobalt sulfides nanowire arrays on nickel foam with different element ratios and porosities are prepared by using a two-step hydrothermal method, and their electrochemical performance is explored. Benefited from the high electrical conductivity, rich active sites and optimized microstructure, the optimized copper cobalt sulfides (CuCo 2 S 4) electrode can achieve a ultrahigh specific capacitance of 2446.6 F·g−1 at 1 A·g−1 and favorable rate performance. The asymmetric supercapacitor assembled with the CuCo 2 S 4 nanowire array and activated carbon (AC) electrodes displays a high energy density of 33.4 Wh·kg−1 at a power density of 751.5 W·kg−1 can be obtained. Additionally, the assembled asymmetric cell shows a favorable capacitance retention of 78% after charging and discharging for 10,000 cycles at a high current density of 4 A·g−1. • The CuCo 2 S 4 electrode achieves an ultrahigh specific capacitance of 2446 F·g−1 at 1 A·g−1. • The CuCo 2 S 4 electrode has unique microstructure and exhibits good rate performance. • The CuCo 2 S 4 /AC-ASC displays high energy density of 33.4 Wh·kg−1 at power density of 751.5 W·kg−1. [ABSTRACT FROM AUTHOR]

A simple hydrothermal route is designed to decorate NiCo 2 S 4 nanoparticles on the surface of N-doped carbon nanotubes to form a coaxial composite (NiCo 2 S 4 @NCNT). Inherited the high electrical conductivity from the NCNT and high capacitive performance of NiCo 2 S 4 , the optimized NiCo 2 S 4 @NCNT composite could significantly reduce the contact resistance and effectively increase the transfer rate of ion and electron and thus benefit for its electrochemical performance enhancement. When employed as a battery-type supercapacitor electrode, the NiCo 2 S 4 @NCNT composite exhibits a high capacitance up to 783.5 C g −1 at 1 A g −1 and as well as rate performance (74.6% retention with the current density increases from 1 to 50 A g −1 ). Coupled with activated carbon (AC) negative electrode, the as-assembled hydride supercapacitor delivers a maximum energy density of 49.75 Wh kg −1 at a power density of 774.65 W kg −1 , as well as 88.9% capacitance retained after 3000 cycles at a current density of 10 A g −1 . These above results demonstrate the enormous potential of NiCo 2 S 4 @NCNT in the development of hybrid supercapacitors. [ABSTRACT FROM AUTHOR]

• CoSe 2 /RGO composite were prepared via a facile microwave assisted method. • The effects of RGO content on electrochemical performance were investigated. • The CoSe 2 /RGO-3 electrode delivers high capacitance of 761 F g−1 at 1 A g−1. • The CoSe 2 /RGO-3//AC exhibits high energy density of 43.1 Wh kg−1 at 800 W kg−1. The composites composed of metal selenides and carbonaceous materials have revealed enormous potential in varied applications. Herein, CoSe 2 /reduced graphene oxide (CoSe 2 /RGO) composites are prepared by a low-cost and efficient microwave assisted method. The effects of RGO proportion on crystalline structure, microstructure and energy storage capacity are explored. Benefiting from the good electrical conductivity and reasonable RGO content, the CoSe 2 /RGO sample with 35.2 wt% RGO reveals an excellent specific capacitance of 761 F g−1 as well as outstanding durability. More importantly, we construct an all solid-state hybrid supercapacitor (CoSe 2 /RGO//active carbon) to broaden the voltage window, resulting in an enhanced energy density (43.1 Wh kg−1). The hybrid device presents a favorable durability with 10% capacity drop after 10,000 cycles. In addition, the practical applicability of asymmetric device is confirmed by powering a blue light emitting diode (LED) for more than 10 mins. This work presents a simple, effective, and reasonable construct strategy to synthesize composites of selenides and RGO for charge storage application. [ABSTRACT FROM AUTHOR]

• The human hair with high elasticity capable can serve as a promising flexible supporter for the electrode. • The reduced graphene oxide nanosheets can effectively improve the electrical conductivity of the electrode. • The Ni(OH) 2 nanoribbon-intercalated rGO nanosheets shows an interconnected porous structure. • The solid-state flexible supercapacitor delivers high energy density and good cycling stability. The demands for wearable energy storage devices keep growing and novel flexible electrode materials and facile prepared methods for these devices are crucial and attractive. In this work, human hair fiber is employed as the flexible fiber-based material due to the high utilization values of low cost, controllable length and high elasticity capable. Herein, an effective and hazard-free microwave-assisted method is reported to develop superelastic reduced graphene oxide coating human hair (rGO@Hh) to achieve conductive and high-strength fibrous electrode. With the braided rGO@Hh fibers, nickel hydroxide nanoribbon-intercalated rGO nanosheets (Ni(OH) 2 /rGO@Hh) are further prepared through microwave radiation treatment, which shows an interconnected porous structure with outstanding electrochemical performances of high specific capacitance (316 F g−1 at 1 A g−1) and good cycling performance. Moreover, a solid-state fiber-based asymmetric supercapacitor (FASC) is assembled with rGO@Hh fibers and Ni(OH) 2 /rGO@Hh fibers as negative and positive electrodes, which demonstrates a high energy of 27.6 Wh kg−1 and a power density of 699 W kg−1, respectively. The FASC also can be further used for numerous electronic products, presenting its prospect for portable wearable devices with high tensile strength and excellent performances. [ABSTRACT FROM AUTHOR]