Search

Catalytic performance and NaBH 4 utilization are two crucial concerns in the electrooxidation of NaBH 4. To improve the inherent properties of regular performance and low fuel utilization of the transition metal Co and Ni, an efficient anode catalyst of ultra-thin CoNi nanosheets modified novel 3D self-supported reduced graphene oxide foam is prepared in this work. The alkaline condition borohydride oxidation reaction on the prepared catalyst is investigated in a typical three-electrode system. The prepared catalyst shows a high performance due to the large electrochemical active surface area, low activation energy (8.29 kJ·mol−1), and the small electrochemical impedance it embraced. Linear scan voltammetry recorded in a low concentration of NaBH 4 suggests that borohydride oxidation is a first-order reaction on the prepared catalyst. Based on the unique structure of the catalyst, which is useful to capture the hydrogen and perform further oxidation of hydrogen, higher utilization of NaBH 4 achieved on the catalyst. Besides, the prepared anode catalyst applied to a direct borohydride-hydrogen peroxide fuel cell (DBHPFC). The results of polarization curve and power density curves, as well as stability research, all indicate that the as-prepared catalyst is a highly efficient anode material for application in DBHPFC. Unlabelled Image • Novel 3D self-supported rGO foam skeleton was prepared by a simple template method. • The catalytic activity of CoNi-NS/rGO foam is higher than CoNi-NS/Ni foam electrode. • Self-supported rGO foam matrix improved the utilization efficiency of NaBH4. • CoNi-NS/rGO foam anode catalyst exhibited highest power density of 140 mW·cm−2. [ABSTRACT FROM AUTHOR]

[Display omitted] • Nitrogen-rich biomass carbon (N-CHC) was prepared by urea etching method. • N-CHC exhibits excellent capacity and rate performance as a K+ half-cell anode. • Large specific surface area, lots of defects and heteroatoms are key advantages. • The hybrid capacitor composed of N-CHC and AC exhibits high energy and power density. Potassium ion hybrid capacitors have the advantages of high energy density, high power density, and low cost, and are expected to replace expensive lithium ion storage devices in large-scale applications. Here, an innovative nitrogen-rich biomass carbon (N-CHC) is prepared using urea as the etchant and hemp core as the raw material, which has a high specific surface area of 1185.3 m2 g−1 and nitrogen content of 8.56%. In addition, it shows a capacity of 442.4 mAh g−1 as a potassium ion half-cell anode at 30 mA g−1. Even under the high current test of 2000 mA g−1, N-CHC also shows excellent performance (175.0 mAh g−1). Further, the good rate performance is attributed to the large-scale capacitance control by analyzing reaction process kinetics. And the constant current intermittent titration technique (GITT) results show that N-CHC has a larger K+ diffusion coefficient than unetched biomass carbon. The maximum energy density of the full carbon-based hybrid capacitor composed of N-CHC anode and activated carbon cathode is 127.36 Wh kg−1, and the maximum power density is 2371 W kg−1. [ABSTRACT FROM AUTHOR]

• NiNb 2 O 6 @NC-2 hollow nanoparticles is used as rate capability anode for LICs. • The NiNb 2 O 6 @NC-2 exhibits a high specific capacity of 435.8 mAh g−1 at 50 mA g−1. • NiNb 2 O 6 decomposes into Ni metal and Li x Nb 2 O 6 in the 1st charge/discharge process. • The NiNb 2 O 6 @NC//AC LICs has a maximum energy density of 123.9 Wh kg−1. Searching for anode materials with fast Li+ intercalation kinetics to mitigate the dynamic imbalance with the rapid capacitive cathode is the fundamental strategy to achieve high energy-power density of Li-ion capacitors (LICs). Hence, NiNb 2 O 6 hollow nanoparticles are first synthesized by hydrothermal method and then sealed with a protective N-doped carbon shell to achieve the target NiNb 2 O 6 @NC composite. As the anode of LICs, the NiNb 2 O 6 @NC sample exhibits a high capacity of 435.8 mAh g−1 at 50 mA g−1 and excellent rate performance of 47.8% capacity retention with the current density increased to 2 A g−1. The lithium storage mechanism of NiNb 2 O 6 is proposed as a combined conversion reaction and an intercalation reaction, which the NiNb 2 O 6 decomposes into Ni metal and Li x Nb 2 O 5 during the 1st discharge/charge process. The irreversible Ni would not contribute to the reversible capacity and will improve the electric conductivity for fast transport of electrons and the Li x Nb 2 O 5 will act as the host for lithium ions by means of the intercalation mechanism. Furthermore, the assembled NiNb 2 O 6 @NC//activated carbon LICs exhibit a maximum energy density of 123.9 Wh kg−1 and the capacity retention reaches 86.1% after 5000 cycles. The superior electrochemical performances indicate that the rationally-designed NiNb 2 O 6 @NC is expected to be a potential anode material for LICs. [ABSTRACT FROM AUTHOR]