Search

The excavation-unloading damage effects of western high-geostress slopes on rock were explored by testing the pre-peak confining pressure unloading sandstone reloading mechanical properties. The deformation and failure mechanisms were studied from a mesoscopic perspective using the particle discrete-element method. (1) Approaching the unloading failure, confining pressure increased the specimen bearing capacity attenuation. (2) The confining pressure unloading promoted microdefect propagation and development; the specimens increased rapidly to the damage stress value after reaching the initiation stress value. The penetration fracture zone was more evident and expansive in the model, and the distribution of the dense crack areas was more concentrated in the fracture zone and area. (3) The average interval of the tangential contact force was the largest in the direction of crack expansion and propagation. The strong force chains were shown to primarily bear external loads, whereas the weak force chains played a key auxiliary role in maintaining stability. (4) The number of cracks developing in the confining pressure unloading damage process indicated that the loading process did not cause damage to the specimens. The fracture zones further propagated and formed on the dominant fractures based on the damage caused by the confining pressure unloading disturbance. [ABSTRACT FROM AUTHOR]

A series of COMSOL numerical models were established to study the chemical compatibility of GCLs (geosynthetic clay liner). The effect of chemistry on the mesoscopic structure and the hydraulic conductivity of GCLs was investigated. The factors, including the initial mobile porosity, the swelling ratio, the pore size, and the ionic strength, were discussed as well. The mesoscopic mechanism of the physical and chemical processes of GCLs was explored by the COMSOL models. The hypothesis that the final mobile porosity and the final pore size are the key factors of the hydraulic conductivity of GCLs was proven by the simulation. Meanwhile, when the ionic strength increased from low to medium, the changes in pore size, mobile porosity, and hydraulic conductivity were obvious. However, when the ionic strength increased from medium to high, the changes of these parameters tended to be gentle, and the changes in hydraulic conductivity were not obvious. Moreover, a theoretical model considering the effect of the initial particle size, the initial mobile porosity, and the ionic strength was developed to predict the hydraulic conductivity of GCLs in a chemical solution. This theoretical model was verified by experimental data. A good agreement was obtained. [ABSTRACT FROM AUTHOR]