Search

The proposed method, based on three combined criteria—Sn—design capacity of the power line, LF, (line flow)—power flow in an electric transmission line, MVA, and the ratio of LF/Sn—allows for ranking electric transmission lines when calculations are performed in normal/pre-emergency modes. A combined set of criteria used to study critical/post-emergency N-k modes is developed. The simulations were performed on the real Baltic 330 kV electricity transmission system. The results reveal that when the power system operates in different load modes, most of the critical power lines determined by our method fall into the actual set of important/"critical" power transmission lines. This allows us to significantly reduce the number of simulated combinations and shorten the calculation time required for it. During the study of the Baltic electricity system, it was found that the developed method was accurate and efficient and suitable for the assessment of the reliability of real electricity transmission networks when planning operational and perspective work modes. The simulations results revealed the high reliability of the Baltic electricity system. The 330 kV electricity transmission network of the Baltic countries fully meets the N-2 criterion (usually, electricity transmission networks are designed to meet the N-1 criterion). [ABSTRACT FROM AUTHOR]

Featured Application: The results and ideas in this paper have a high practical significance, thus can easily be applied by grid operators and any other interested parties. Firstly, the discovered principles of voltage sags propagation can be used for the planning and implementation of a PQ monitoring system, as has successfully been carried out in Lithuania. Secondly, the created BRELL-based test scheme can be used and expanded in further researches. Thirdly, the proposed methodology, involving both reliability indexes and probabilistic analysis of the primary causes of faults in the PQ field, can be used by grid operators, while the method created for the estimation of functions (distributions) similarity can be used universally. Fourthly, in a wider context, the findings will be useful for grid planning, the framework of national energy strategies and legal documents, also as a PQ database for machine learning in anticipation of AI algorithms. Nowadays, voltage sag continues to remain a critical PQ issue in the industry. Since it is not possible to install a voltage analyzer on every node, optimal monitoring locations must be determined. However, during the PQ monitoring campaign of the Lithuanian DSO grid, the execution of this task was inhibited by the lack of knowledge and literature about the fundamentals of voltage sags propagation. Therefore, the first part of this paper investigates the propagation paths of voltage sags by using a voltage sag matrix method on the created test grid, which for the first time is BRELL-based. This paper is the first to not only investigate voltage sags propagation paths (both downward and upward) in detail, but also to investigate them complexly, encompassing all four types of short-circuits, both voltages (phase-to-phase and phase-to-ground), and interconnections with other PQ events (interruption, transient, unbalance). The result has established a generalization of voltage sags propagation mechanisms by inductive reasoning and laid the foundation for the further development of PQ theory. The second part of this paper focuses on the Lithuanian DSO grid and is one of the first to investigate voltage sags/interruptions through the prism of both relationship with reliability indexes (SAIFI and SAIDI) and primary causes. For this purpose, we created our own scientific methodology, applying known probabilistic and statistical methods along with newly proposed approaches, in particular for ACR success evaluation and estimation of functions similarity. [ABSTRACT FROM AUTHOR]

In the past few years, technical progress has determined traditional electric power system conversion to Smart Grids, and consequently empowered a worldwide renaissance in the forgotten PQ field. Since the installation of PQ monitors is currently associated with high investments and operational costs, it is inappropriate to install a monitor on each grid busbar. Hence, grid operators must establish the best cost–benefit scenario for monitors installation and achieve maximal observability with a limited number of analyzers. Firstly, this paper presents a review of the state-of-the-art of displacement strategies, and discusses them regarding the tendencies of node selection criteria, the test schemes used, and the grid size. Secondly, the relevant fundamental issues which must be solved in the future in order to eliminate restrictions in PQ monitors' allocation planning are presented and discussed. These issues concern the treatment, interpretation, and assessment of PQ events, measurement chain technical features, PQ's role in the grid planning stage, communication technologies, and other remote monitoring aspects, and integration with other Smart Grid applications. The provided insights are based on experience which has been obtained during the PQ measurement campaign in the Lithuanian DSO grid. Finally, a PQ system development strategy—both short-term and long-term perspectives—in the Lithuanian distribution grid is presented, including monitors allocation criteria. [ABSTRACT FROM AUTHOR]