Search

Featured Application: The XGBoost–GR–stacking gas outburst early warning model established in this article demonstrates high accuracy and practical performance, making it suitable for gas outburst risk warning in mining safety. To improve the accuracy of gas outburst early warning, this paper proposes a gas outburst risk warning model based on XGBoost–GR–stacking. The statistic is based on gas outburst data from 26 mines and establishes a data generation model based on XGBoost. The obtained virtual datasets are analyzed through visualization analysis and ROC curve analysis with respect to the original data. If the augmented data has an ROC area under the curve of 1, it indicates good predictive performance of the augmented data. Grey correlation analysis is used to calculate the grey correlation degrees between each indicator and the "gas emission". The indicator groups with correlation degrees greater than 0.670 are selected as the main control factor groups based on the sorting of correlation degrees. In this study, SVM, RF, XGBoost, and GBDT are selected as the original models for stacking. The original data and virtual data with correlation degrees greater than 0.670 are used as inputs for SVM, RF, XGBoost, GBDT, and stacking fusion models. The results show that the stacking fusion model has an MAE, MSE, and R2 of 0.031, 0.031, and 0.981. Comparing the actual and predicted values for each model, the stacking fusion model achieves the highest accuracy in gas outburst prediction and the best model fitting effect. [ABSTRACT FROM AUTHOR]

The coal mine in deep mining can easily form a compound dynamic disaster with the characteristics of rock burst and gas outburst. In this paper, the analytic hierarchy process (AHP) and the entropy weight method (EWM) are combined, and the fuzzy comprehensive evaluation (FCE) secondary evaluation model of compound dynamic disaster is proposed to evaluate the risk of compound dynamic disaster, which avoids the problems of the imperfect evaluation index system and strong subjectivity of index weight. Based on the statistical analysis of typical compound dynamic disaster cases in China, three first-level indicators were established, and sixteen second-level indicators were developed. The verification results show that the accuracy and weight are better than the traditional evaluation methods. Combined with geological and mining data, the compound dynamic disaster risk assessment was carried out on the second mining area of mine B, in the Pingdingshan mining area, and the result was grade II (weak risk). Corresponding prevention measures and parameters were implemented, and no compound dynamic disaster occurred during the working face excavation. [ABSTRACT FROM AUTHOR]

The surrounding rock during a coal mine excavation is prone to significant engineering disasters such as considerable deformation and rock bursts. Pressure release can improve the stress field of a deep rock mass and prevent the occurrence of dangers such as roadway collapse and coal and gas outbursts. This paper uses the ANSYS 19.0/LS-DYNA finite element software to simulate the crush area and fracture zone of a detonation charge with different diameters under in situ stress. The stability of the surrounding rock was analyzed based on the impact stress and velocity, and was verified by field tests. The research results show that the blasting load primarily affects the damaged area near the borehole, while the in situ stress affects far-field crack propagation. The crack propagates in the direction of high surrounding rock pressure. When the uncoupling index is 1.5, the impact pressure of a 60 mm diameter cartridge is eight times that of a 20 mm diameter cartridge. The impact speed can reach two times that of the 20 mm diameter cartridge. The high-energy event at the roof is transferred to the front of the working face, the distribution is no longer concentrated, and a better pressure-relief blasting effect is achieved. The research results can help guide the prevention and control measures of rock bursts and other mining disasters. [ABSTRACT FROM AUTHOR]

The coal and gas outburst and rockburst coupling disaster is becoming increasingly serious due to deep mining. To clarify the mechanism inducing the outburst–rockburst coupling disaster, a true triaxial single-sided unloading mechanical test was conducted with the aid of a true triaxial solid–thermal–gas coupling test device, an industrial computed tomography (CT) system, and an acoustic emission system. Through this test, the mechanical characteristics, meso crushing characteristics, and acoustic characteristics in the disaster formation process were obtained. Additionally, the outburst–rockburst coupling instability disaster law was verified by numerical simulation. The results demonstrated that the stress unloading degree of the coal body was negatively correlated with the initial gas pressure in the outburst–rockburst coupling disaster. The time domain parameter count and energy of acoustic emission exhibited a "bimodal" distribution pattern in the instability stage. The rockburst would occur when the peak value was in a "low-count and high-energy" state, while coal and gas outburst would occur when the peak value was in a "high-count and low-energy" state. The meso slice revealed that gas degradation promoted the development of microcracks in the coal body, and the penetration of cracks resulted in the main cracks of structural instability during rockburst. The coal and gas outburst was mainly attributed to the "cross" shear failure pattern of the coal body. These research findings may lay a foundation for the effective prevention and control of outburst–rockburst coupling disasters. [ABSTRACT FROM AUTHOR]

China's coal mines have to extend to greater depths for the exploitation of more mineral resources, and they have suffered catastrophic mining-induced disasters, such as rockbursts, water inrushes, coal and gas outbursts, and roof fall accidents. The microseismic monitoring technique is a practical tool for mine safety management, which is extensively utilized in many Chinese coal mines. Microcracks of coal/rock masses are recorded as microseismicities in the field, and the potential mining-induced instabilities can be assessed by in-depth analysis of the microseismic parameters. This study provides a state-of-the-art review of the achievements and developments of the microseismic monitoring technique in coal mines. It also presents some prospects for improving the location accuracy of microseismicity, efficient and intelligent processing of the microseismic data, comprehensive assessment of coal/rock instabilities, and development of new microseismic monitoring equipment. This study is valuable for mine safety management and may contribute to improving the deep mining production. [ABSTRACT FROM AUTHOR]

The gas contained in coal plays a crucial role in triggering coal and gas outbursts. During an outburst, a large quantity of gas originally absorbed by coal is released from pulverized coal. The role this part of the gas plays in the process of coal and gas outbursts has not been clearly elucidated yet. Therefore, investigating the changes in gas desorption rate from coal particles of different sizes could provide some meaningful insights into the outburst process and improve our understanding of the outburst mechanism. First, combining the diffusivity of coal of different particle sizes and the distribution function of broken coal, we present a gas desorption model for fragmented gas-bearing coal that can quantify gas desorption from coal particles within a certain range of size. Second, the gas desorption rate ratio is defined as the ratio of the gas desorption rate from coal being crushed to that from coal before breaking. The desorption rate ratio is mainly determined by the desorption index (γ) and the granularity distribution index (α). Within the limit range of coal particle sizes, the ratio of effective diffusion coefficient for coal particles with different sizes is directly proportional to the reciprocal of the ratio of particle sizes. Under uniform particle size conditions before and after fragmentation, the gas desorption rate ratio is the square root of the reciprocal of the effective diffusion coefficient. The gas desorption model quantitatively elucidates the accelerated desorption of adsorbed gas in coal during the continuous fragmentation process of coal during an outburst. [ABSTRACT FROM AUTHOR]

In the water-rich karst regions, high water and mud outbursts are common geological disasters in tunnel construction. To ensure the safe and smooth construction of tunnel projects, it is necessary to consider anti-water pressure, water inrush prevention and geological disasters during the design of tunnels. Based on the Yongfutun Tunnel Project, this paper studies the application and effect of radial grouting and curtain grouting, which involves those in high-water-pressure tunnels under double-layer support conditions. To obtain the effects and parameters of radial grouting and curtain grouting, the influences of different grouting ranges on the tunnel's surrounding rocks and supporting structures were analyzed and the finite difference method was adopted. The results show that the radial grouting of the surrounding rock can notably improve the initial support of the tunnel, but the impact is less obvious when the grouting range exceeds 4 m. The design of radial grouting is recommended to be 4.0 m to 4.5 m. Curtain grouting can effectively reduce the external water pressure of the tunnel lining. The external water pressure of the grouting area is 23% greater than that without curtain grouting. Curtain grouting can slow down the infiltration of external water pressure. This is beneficial to the stress of the tunnel lining structure, but the improvement in initial support force is slight. Moreover, curtain grouting improves the safety reserve of the secondary lining by strengthening the self-stability ability of the surrounding rock. Meanwhile, the double-layer primary support can effectively share the external water pressure and surrounding rock pressure. This study provides a certain reference for the lining design of high-water-pressure tunnels. [ABSTRACT FROM AUTHOR]

When rockbursts and coal and gas outbursts simultaneously occur in a coal mine, changes in gas adsorption (concentration of ambient methane) and displacement of coal and rock must occur. The co-associated minerals in coal reservoirs can affect the mechanical properties and methane adsorption capacity, which are commonly disregarded. It is important to construct compound molecular structure models of coal and rock and conduct molecular dynamic simulations to gain a microscopic understanding of underground disasters. In this work, the molecular structure models of anthracite and coking coal–rock compound models containing different contents of calcite and kaolinite were constructed, and the methane adsorption amount and mechanical properties considering temperature, pressure, and mineral contents were simulated and analysed. The results showed that the methane adsorption amount of the compound models increased rapidly, then increased moderately, and stabilized eventually with increasing adsorption pressure, and the Langmuir fitting findings were good. The saturation adsorption amount of methane in the coal models linearly decreased with increasing temperature, while the methane adsorption heat increased. The presence of minerals adsorbed a certain amount of methane, and the methane adsorption amount increased with increasing mineral contents. The mechanical properties of coal molecules changed when mineral molecules such as calcite and kaolinite were present, which had opposite contribution effects. The addition of kaolinite minerals to the coal molecular model always increased the bulk modulus and shear modulus, while the addition of calcite decreased the bulk modulus of the anthracite, causing an increase in the brittleness of the models. The results of the study further explain the adsorption behaviour and mechanical properties of methane in coal and minerals. [ABSTRACT FROM AUTHOR]

Low-rank coal accounts for over half of China's proven coal reserves. The possibility of coal and gas outbursts in low-rank coal is higher, especially in the m·agmatic thermal evolution area. The complexity of coal's molecular structure is one of the reasons for problems during the process of mining operations. Different analysis techniques, including XRD, FTIR and Raman spectroscopy, were used to obtain the molecular characteristics of magmatic thermal evolution coal samples and normal coal samples, so that a comparative study could be carried out to investigate the influence of the magmatic thermal evolution effect on the molecular structure of low-rank coal. The ranges of the aromatic interlayer spacing (d002), average stacking heights (Lc) and stacking layer number (Nave) of the thermally evolved coal samples are 3.41–3.51 Å, 22.76–27.02 Å, and 6.68–7.70, respectively. The ranges of the full width at half maximum ratio (FD1/FG) and the peak integral intensity ratio (ID1/IG) are 2.16–2.19 and 1.55–1.84, respectively. Compared with the normal coal samples, those affected by magmatic thermal evolution have smaller d002, ID1/IG, and FD1/FG values, but larger Lc values. The results indicate that the thermally evolved coal samples have more ordered structures and more developed microcrystalline structure sizes than normal coal samples. [ABSTRACT FROM AUTHOR]

A gas outburst risk level prediction method, based on the Whale Optimization Algorithm (WOA) Improved Extreme Learning Machine (ELM), is proposed to predict the coal and gas outburst hazard level more accurately. Based on this method, recommendations are given according to the gas outburst risk level with the help of the Case-Based Reasoning (CBR) method. Firstly, we analyze the accident reports of gas outburst accidents, select the gas outburst risk prediction index, and construct the gas outburst risk prediction index system by combining the gas outburst prevention and control process. The WOA-ELM model was used to predict the gas outburst risk level by selecting data from 150 accident reports from 2008 to 2021. Again, based on the coal and gas outburst risk level, CBR is used to match the cases and give corresponding suggestions for different levels of gas outburst risk conditions to help reduce the gas outburst risk. The results show that the WOA-ELM algorithm has better performance and faster convergence than the ELM algorithm, when compared in terms of accuracy and the error of gas outburst hazard prediction. The use of CBR to manage prediction results can be helpful for decision-makers. [ABSTRACT FROM AUTHOR]