Search

A novel re-entrant honeycomb metamaterial based on 3D-printing technology is proposed by introducing chiral structures into diamond honeycomb metamaterial (DHM), named chiral-diamond-combined honeycomb metamaterial (CDCHM), and has been further optimized using the assembly idea. Compared with the traditional DHM, the CDCHM has better performance in static and vibration isolation. The static and vibration properties of the DHM and CDCHM are investigated by experiments and simulations. The results show that the CDCHM has a higher load-carrying capacity than that of the DHM. In addition, the vibration isolation optimal design schemes of the DHM and CDCHM are examined by experiments and simulations. It is found that the vibration suppression of the CDCHM is also improved greatly. In particular, the optimization approach with metal pins and particle damping achieves a wider bandgap in the low-frequency region, which can strengthen the suppression of low-frequency vibrations. And the introduction of particle damping can not only design the frequency of the bandgap via the alteration of the dosage, but also enhance the damping of the main structure. This work presents a new design idea for metamaterials, which provides a reference for the collaborative design of the static and vibration properties of composite metamaterials.

Based on the concept of component assembly, a novel star polygon-coupled honeycomb metamaterial, which achieves a collaborative improvement in load-bearing capacity and vibration suppression performance, is proposed based on a common polygonal structure. The compression simulation and experiment results show that the load-bearing capacity of the proposed metamaterial is three times more than that of the initial metamaterial. Additionally, metal pins are attached and particle damping is applied to the metamaterial to regulate its bandgap properties; the influence of configuration parameters, including the size, number, position, and material of the metal pins, on bandgaps is also investigated. The results show that the bandgap of the proposed metamaterial can be conveniently and effectively regulated by adjusting the parameters and can effectively suppress vibrations in the corresponding frequency band. Particle damping can be used to continuously adjust the frequency of the bandgap and further enhance the vibration suppression capacity of the metamaterial in other frequency bands. This paper provides a reference for the design and optimization of metamaterials.

An improved re-entrant negative Poisson’s ratio metamaterial based on a combination of 3D printing and machining is proposed. The improved metamaterial exhibits a superior load-carrying and vibration isolation capacity compared to its traditional counterpart. The bandgap of the proposed metamaterial can be easily tailored through various assemblies. Additionally, particle damping is introduced to enhance the diversity of bandgap design, improve structural damping performance, and achieve better vibration isolation at low and medium frequencies. An experiment and simulation were conducted to assess the static and vibration performances of the metamaterial, and consistent results were obtained. The results indicate a 300% increase in the bearing capacity of the novel structure compared to traditional structural metamaterials. Furthermore, by increasing the density of metal assemblies, a vibration-suppressing bandgap with a lower frequency and wider bandwidth can be achieved. The introduction of particle damping significantly enhanced the vibration suppression capability of the metamaterial in the middle- and low-frequency range, effectively suppressing resonance peaks. This paper establishes a vibration design method for re-entrant metamaterials, which is experimentally validated and provides a foundation for the vibration suppression design of metamaterials.

To explore the lightweight structures with excellent vibration and acoustic properties, corrugated composite panels with different fiber reinforcements, i.e., carbon and glass fibers, were designed and fabricated using a modified vacuum-assisted resin infusion (VARI) process. The vibration and sound transmission loss (STL) of the corrugated composite panels were investigated via mode and sound insulation tests, respectively. Meanwhile, finite element models were proposed for the verification and in-depth parametric studies. For the vibration properties of the corrugated composite panels, the results indicated that the resin layer on the panel surface, despite the extremely low thickness, showed a significant effect on the low-order bend modes of the entire structure. In addition, the difference in the mode frequency between the panels consisting of different fiber types became more and more apparent with the increase of the frequency levels. For the sound insulation property of the panel, the initial frequency of the panel’s resonant sound transmission can be conveniently increased by increasing the layer thickness of surface resin, and the fraction of fiber reinforcements is the most predominant factor for the sound insulation property, which was significantly improved by increasing the thickness of the fiber cloth. This work can provide fundamental support for the comprehensive design of vibration and acoustics of the composite sandwiched panel.