Search

The work is focused on the assessment of possible methods for intensification of photocatalytic degradation of common water borne pollutants. Solar photocatalysis poses certain limitations for large scale application with several possible reactor designs which have shown an optimal performance. In the current study, a comparison between two types of pilot scale reactors was made: a flat-plate cascade reactor (FPCR) and tubular reactor with a compound parabolic collector (CPC). Apart from the reactor design, another aspect of possible intensification was a photocatalyst formulation. The efficiency of photocatalytic films that consisted of pure TiO2 nanoparticles was compared to the efficiency of films that consisted of TiO2/CNT composites. Intensification assessment was performed via detailed kinetic modelling, combining the optical properties of films, irradiation conditions and reactor mass balance. Intensification was expressed via intensification indices. Results showed the advantage of the CPC-based reactor design and an unbiased effect of sensitizing agent (CNT) in the photocatalytic film formulation.

In this study, laser sintering of TiO2 nanoparticle films on plastic substrates was conducted in order to improve the incident photon-to-electron conversion efficiency (IPCE) of flexible dye-sensitized solar cells (DSCs). Lasers with different wavelengths (355 nm and 1064 nm) were used to process the TiO2 electrodes. With an optimized processing parameter combination, the 1064 nm laser can sinter 13 μm thick TiO2 films uniformly, but the uniform sintering cannot be achieved by the 355nm ultraviolet (UV) laser, since the films possess a high absorption ratio at 355 nm. The experimental results demonstrate that the near-infrared laser sintering can enhance the electrical connection between TiO2 nanoparticles without destroying the flexible plastic substrate, reduce the transmission impedance of electrons and increase the absorption rate of incident light. Furthermore, the charge collection efficiency, fill factor, and short-circuit current have all been improved to some extent, and the solar conversion efficiency increased from 4.6% to 5.7%, with an efficiency enhancement reaching 23.9%.