Search

Microplastic (MP) water pollution is a major problem that the world is currently facing, and wastewater treatment plants (WWTPs) represent one of the main alternatives to reduce the MP release to the environment. Several studies have analysed punctual samples taken throughout the wastewater treatment line. However, there are few long-term studies on the evolution of MPs over time in WWTPs. This work analyses the performance of a WWTP sited in Southwest Europe in relation with annual occurrence and fate of MPs. Samples were monthly taken at different points of the facility (influent, secondary effluent, final effluent, and sludge) and MPs were quantified and characterised by means of stereomicroscopy and FTIR spectrophotometry. The majority of MPs found in wastewater and sludge samples were fragments and fibres. Regarding to the chemical composition, in the water samples, polyethylene (PE), polyethylene terephthalate (PET) and polypropylene (PP) stood out, whereas, in the sludge samples, the main polymers were PET, polyamide (PA) and polystyrene (PS). The MPs more easily removed during the wastewater treatment processes were those with sizes greater than 500 µm. Results showed that the MPs removal was very high during all the period analysed with removal efficiencies between 89% and 95%, so no great variations were found between months. MP concentrations in dry sludge samples ranged between 12 and 39 MPs/g, which represented around 79% of the total MPs removed during the wastewater treatment processes. It is noticeable that a trend between temperature and MPs entrapped in sewage sludge was observed, i.e., higher temperatures entailed higher percentage of retention.

Microplastics (MPs), and specifically microfibres (MPFs), are ubiquitous in water bodies, including wastewater and drinking water. In this work, a thorough literature review on the occurrence and removal of MPs, and specifically MPFs in WWTPs and DWTPs, has been carried out. When the water is treated, an average microfiber removal efficiency over 70% is achieved in WWTPs and DWTPs. These high percentages are still inefficient for avoiding the presence of a large number of microfibres in treated wastewater and also in tap water. RSF, DAF, oxidation ditch and CAS processes have been described as the most efficient treatments for eliminating MPFs from wastewater treatment. It is remarkable the wide range of the data reported on this topic; for example, treated wastewater contains between not detected and 347 MPFs/L, whereas tap water contains between not detected and 168 MPFs/L. Microfibres constitute more than half of the MPs found in treated wastewater and sewage sludge, whereas in DWTP effluents the percentage of MPFs is around 32%. Nevertheless, the relative amount of MPFs reported in tap water is notably higher (71%). Microfibres from WWTPs are discharged to the environment, being a source of MP pollution. Additionally, MPs released by DWTPs directly enter the drinking water lines, which constitute a direct route for MP human consumption, so that it has been estimated that an adult may ingest an average value of 7500 MPFs per year only via tap water. Thus, this review provides an update on the performance of WWTPs and DWTPs in removing MPs from water, which is an issue of great interest.

An adaptation of the laser floating zone technique is used to modify the surface properties of ceramics with interest for biomedical applications. This new method is based upon the surface remelting of ceramic rods by using laser radiation, and its versatility is demonstrated in the surface structuring of two different eutectic composites with potential application as bone substitutes. Firstly, directionally eutectic rods of wollastonite (W)–tricalcium phosphate (TCP) and magnesium oxide (MgO)–magnesium stabilized zirconia (MgSZ) were grown by the laser floating zone technique. In the case of W-TCP eutectics, materials with crystalline, glass–ceramic, or vitreous microstructure could be obtained as the growth rate was increased. In the other case, a material made up of magnesium oxide and magnesium stabilized zirconia phases arranged in fibrillar or lamellar geometry was obtained. At higher solidification rates, the rupture of the growth front gave rise to the organization of the phases in the form of colonies or cells. The laser zone remelting technique was used to remove defects and to refine the microstructure of the directionally solidified eutectic surfaces as well as to cover MgO–MgSZ rods with W–TCP glass in the eutectic composition. The study provides a promising technique that can tailor the surface properties and functionality of bone repair materials. The products’ properties and challenges in preparation procedures are discussed.

Cobalt-doped MgO-MgAl2O4 eutectic composites were explored for their use as selective emitters for thermophotovoltaic devices. Eutectic ceramic rods with different cobalt content were directionally solidified by using the laser floating zone technique at two processing rates to obtain microstructures with different domain sizes. Thermal emission between 1000 °C and 1500 °C and optical properties (reflectance and transmittance) at room temperature were measured in the Co-doped composites and the effect on microstructure and cobalt content was investigated. Thermal emission consisted of an intense broad band at about 1.67 µm matching with the bandgap of the InGaAs cell. The emission was ascribed to the de-excitation from the 4T1(F) multiplet to the 4A2(F) ground state of the thermally excited Co ions located in the tetrahedral sites of the MgAl2O4 phase. The selectivity of the thermal emission showed a decrease with the cobalt content due to the enhancement of other electronic transitions, which leads to keeping the cobalt content in these composites at low levels (

In this work we report on the spectroscopic properties and the near-infrared to visible upconversion of Er3+ ions in aluminosilicate glasses manufactured by directionally solidification with the laser floating zone technique. Glasses were manufactured in a controlled oxidizing atmosphere to provide them with high optical transmission in the visible spectral range. Absorption and emission spectra, and lifetimes were assessed in both the visible and the near infrared spectral range. Green upconversion emissions of the 2H11/2→4I15/2 and 4S3/2→4I15/2 transitions at 525 nm and 550 nm attributed to a two-photon process were observed under excitation at 800 nm. Mechanisms responsible for the upconversion luminescence were discussed in terms of excited state absorption and energy transfer upconversion processes. Excitation spectra of the upconverted emission suggest that energy transfer upconversion processes are responsible for the green upconversion luminescence.

Magnesium-based ceramics are involved in orthopedic applications such as bone scaffolds or implant coatings. They provide structural support to cells for bone ingrowth, but highly porous matrices cannot resist severe mechanical stress during implantation. In this study, the laser floating zone (LFZ) technique is used to prepare a dense crystalline material with composition in the CaO−SiO2−MgO−P2O5 system. This material, under physiological conditions, is able to generate a porous scaffold controlled by the dissolution of the MgO phase, meeting the mechanical advantages of a dense material and the biological features of a porous scaffold. FESEM (Field emission scanning electron microscopy), XRD (X-ray Diffraction), EDS (Energy Dispersive X-rays spectroscopy), and ICP ((Inductively Coupled Plasma) analysis were carried out in order to characterize the samples before and after immersion in simulated body fluid (SBF).