Search

In this article, an investigation into the natural radioactivity content in natural inorganic pigments was carried out, together with the assessment of the radiological health risk for the public related to external exposure to ionizing radiations, via High-Purity Germanium (HPGe) γ-ray spectrometry measurements and the calculation of several indices like the absorbed γ-dose rate (D), the annual effective dose equivalent outdoor (AEDEout) and indoor (AEDEin), and the activity concentration index (I). From the obtained results, it was possible to reasonably exclude radiological hazard effects. In addition, Pearson’s correlation, principal component analysis (PCA), and hierarchical cluster analysis (HCA) were carried out with the aim of determining correlations between natural radioactivity content and radiological indices and with the analyzed samples. As a result, five clusters of the investigated pigments were recognized at the highest level of detail based on their chemical composition and mineralogical nature.

In this paper, the evaluation of the Rn-222 radioactivity content in drinking water samples from the Calabria region, southern Italy, is reported as a case study. The Rn-222-specific activity in the analyzed groundwater samples for human use was evaluated by using the PerkinElmer Tricarb 4910 TR setup and compared with the parameter value (100 Bq L−1) reported in the reference Italian legislation, i.e., D.Lgs. 28/2016, derived from the European Directive 2013/51/Euratom. The radiological health risk for the population of the investigated area, due to the ingestion and inhalation of Rn-222 dissolved in water, was then evaluated by calculating the total annual effective dose, only in those cases where the parameter value was exceeded. The obtained results represent a main reference for the investigated area and are useful for determining any possible radiological health risk for human beings related to the ingestion of the investigated radionuclide. Moreover, they can also be used as a baseline for future investigations regarding background radioactivity levels.

We present some results, obtained using a multi-scale approach, based on the employment of different and complementary techniques, i.e., Optical Microscopy (OM), Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (SEM-EDS), X-ray diffraction (XRD), Raman and µ-Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy equipped with Attenuated Total Reflectance (ATR) analyses, Inductively Coupled Plasma–Mass Spectrometry (ICP-MS), and Thermal Ionization Mass Spectrometry (TIMS), of an integrated activity focused on the characterization of micro-fragments of original and previously restored paintings of the pictorial cycle at the San Panfilo Church in Tornimparte, sampled from specific areas of interest. The study was aimed, on one hand, at the identification of the overlapping restoration materials used during previous conservation interventions (documented and not), and, on the other hand, at understanding the degradation phenomena (current or previous) of the painted surfaces and the architectural structures. The study of stratigraphy allowed us to evaluate the number of layers and the materials (pigments, minerals, and varnishes) present in each layer. As the main result, the identification of blue, black, yellow, and red pigments (both ancient and modern) was achieved. In the case of blue pigments, original (azurite and lazurite) and retouching (Prussian blue and phthalo blue) materials were recognized, together with alteration products (malachite and atacamite). Traces of yellow ochre were found in the yellow areas, and carbon black in the blue and brown areas. In the latter, hematite and red ochre pigments were also recognized. The obtained results are crucial to support the methodological choices during the restoration intervention of the site, and help to ensure the compatibility principles of the materials on which a correct conservative approach is based.

In the present paper, an investigation on the natural and anthropic radioactivity and heavy metals content in a basalt aggregate for concrete from Sicily, Southern Italy, was performed as a case study. In particular, the evaluation of the specific activity of radium-226, thorium-232, potassium-40 and caesium-137 radionuclides was performed by using High-Purity Germanium (HPGe) γ-ray spectrometry, together with the estimation of several indexes developed to evaluate the radiological risk for the population related to radiation exposure, i.e., the alpha index (Iα), the radium equivalent activity (Raeq), the absorbed γ-dose rate (D) and the annual effective dose equivalent outdoor (AEDEout) and indoor (AEDEin). Moreover, measurements of the average heavy metals (arsenic, cadmium, copper, mercury, nickel, lead, antimony, thallium and zinc) concentrations in the analyzed sample were performed by using Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Furthermore, with the aim to investigate any possible chemical pollution, the Enrichment Factor (EF), Geo-accumulation Index (Igeo), Contamination Factor (CF) and Pollution Load Index (PLI) were assessed. Finally, the identification of the source of the aforementioned radioisotopes of natural origin was carried out by X-ray diffraction (XRD), thus identifying the major mineralogical phases present in the investigated basalt aggregate for concrete.

In this article, the assessment of the radioactivity content in bovine meat from the Calabria region, Southern Italy, was performed. For this purpose, High Purity Germanium (HPGe) gamma spectrometry measurements were carried out in order to investigate any possible radioactive contamination by natural (40K) and anthropogenic (137Cs) radionuclides. Experimental mean values were found to be in the range from (78.9 ± 10.5) Bq kg−1 to (88.2 ± 12.5) Bq kg−1 for 40K and lower than the minimum detectable activity (MDA) in all cases for 137Cs, respectively. Moreover, any possible radiological health risk was also estimated, by calculating the total annual effective dose due to the ingestion of bovine meat by adult members of the population and by comparing it with the total natural radioactivity value (external + internal) for humans. Obtained values are in the range from 10.3 µSv y−1 to 11.5 µSv y−1, several orders of magnitude lower than the value of the total exposure to natural radioactivity for human beings, i.e., 2.4 mSv y−1. It is worth noting that the used approach could be used, in principle, for the evaluation of the radiological risk due to the presence of radionuclides in a large variety of food samples of particular interest, and thus it can constitute a guideline for investigations focused on the monitoring of food quality.

Potentially toxic elements contamination represents a universal problem of major concern, due to several adverse health effects on human beings when permissible concentration levels are overcome. In this sense, the assessment of potentially risky elements content in different environmental matrices plays a key role in the safeguarding of the quality of the environment, and thus of the strictly correlated public health. In this article, measurements of the average potentially toxic elements concentrations in pyroclastic products from Mt. Etna, Eastern Sicily and Southern Italy were performed together with a comparison with the allowable levels set by Italian legislation, with the aim to evaluate the level of toxicity imposed on the ecosystem. For this purpose, Inductively-Coupled Plasma Mass Spectrometry (ICP-MS) measurements were performed to investigate any possible chemical pollution by potentially risky elements, by applying different indices such as Enrichment Factor (EF), Geo-accumulation Index (Igeo), Contamination Factor (CF) and Pollution Load Index (PLI). Finally, the multivariate statistical analysis was performed by processing potentially toxic elements content and pollution indices. It is worth noting that the used approach could be applied, in principle, for the evaluation of the chemical risk due to the presence of potentially toxic elements in a large variety of samples of particular environmental interest, and can constitute a guideline for investigations focused on the monitoring of the environmental quality.

The natural (40K) and anthropogenic (137Cs) radioactivity concentration in four different typologies of early childhood (up to two years old) foods, i.e., homogenized fruit, homogenized meat, childhood biscuits and baby pasta, produced in Italy and sold in Italian large retailers, was investigated through High Purity Germanium (HPGe) gamma spectrometry. The present study is carried out with the aim to: (i) evaluate the background levels of the investigated radionuclides in the analyzed early childhood foods, (ii) identify whether the twenty analyzed samples were appropriate for infant consumption and (iii) contribute to construct a database on the radioactivity of early childhood foods sold in Italy.

The radiological quality of drinking water is directly associated with the health of the population. Indeed, it is well known that the presence of radionuclides in drinking water constitutes a health risk for humans because the consumption of such water increases the likelihood of incurring cancer. For this reason, all the studies aimed at developing new methodologies for the qualitative and quantitative analysis of the radioisotopic composition of drinking water are absolutely desired by the international scientific community, as well as by the institutes that deal with the protection of public health. In this paper, a new methodological approach was developed for the evaluation of the 238U content in drinking water. A sample coming from Paola, Calabria region, southern Italy, was taken as a case study. The assessment was performed by using High Purity Germanium (HPGe) gamma-ray spectrometry, with the aim of quantifying the specific activity of the 234mPa radioisotope after a preconcentration procedure, and thus to assess the activity concentration of 238U, in the hypothesis of the secular radioactive equilibrium between it and its daughter. The obtained results were validated through the comparison with the 238U (µg/L) concentration as measured with Inductively Coupled Plasma-Mass Spectrometry (ICP-MS).

The present paper illustrates the results of a diagnostic investigation performed on the oil on canvas painting “The Glory of St. Barbara” (1680–1688) by Mattia Preti. The painting is located inside the St. Barbara Church in Taverna (Catanzaro, Italy), the city that gave birth to the artist. In situ, non-invasive studies, by applying X-ray fluorescence (XRF) spectroscopy, along with laboratory micro-destructive analytical investigations, by employing electron probe microanalyses (EPMA) coupled with energy-dispersive spectrometry (EDS) and micro-Raman (µ-Raman) spectroscopy, were combined to retrieve the color palette and identify the painting technique and style of the famous master. As a result of this multi-scale characterization, an extraordinary pictorial technique was revealed, enriching knowledge about one of the oldest pictorial traditions outlined by Mattia Preti, and solving doubts still existing about many of his investigated artworks. Moreover, the achieved results represent useful and essential tools to address management issues of the artwork, by providing valuable information for planning and monitoring future restoration interventions of the canvas.

A new radiological risk containment procedure, developed to manage the radiological risk in potentially contaminated areas, is presented here. This new methodological approach, systematically employed in sampling and site inspection activities in unknown areas from an environmental point of view, allowed the discovery of eight 226Ra orphan sources buried under the road surface, in a good state of conservation, in an industrial area of the Calabrian territory, southern Italy, and they are reported here as a case study. For workers performing sampling activities in areas for which information regarding the possible presence of contaminated material is missing, an in situ radiometric check is usually carried out as a potential radiological risk prevention, by measuring the levels of environmental radioactivity. Other than this, the procedure described in this article includes, as novelty, a series of progressive operations never carried out before all together for outdoor activities: the assessment of the presence (if any) of hot spots by recording radiometric anomalies, outdoor gamma spectrometry measurements in order to identify the radionuclides generating those anomalies, the sources unearthing activities, the management of the material found and the application of a risk containment protocol.

Modern footbridges are often lively structures, characterized by natural frequencies that fall in the range of pedestrian activities, such as walking, running, and jumping. Therefore, serviceability assessment under human-induced excitation is crucial both at the design stage and during the footbridge lifetime. This paper presents and validates two different FE models of an existing footbridge with very complex geometry: the Streicker Footbridge at the Princeton University Campus. It represents a benchmark in the field as a testbed for vibration serviceability assessments under pedestrian excitation. The real structure is equipped with strain and temperature sensors that are currently used to collect measurements in both static and dynamic modes for research and educational purposes in Structural Health Monitoring (SHM). Based on detailed drawings of the Streicker Footbridge, a three-dimensional beam-based model was developed to represent the complex behavior of the full-scale benchmark bridge. Subsequently, a more refined discretization of the bridge deck adopting shell elements was inserted. The bridge Finite Element models were validated against available SHM data concerning static and dynamic tests. The relevant ANSYS APDL script files along with an example of pedestrian jumping application are available upon request for further research developments on the relationship between pedestrians and the benchmark footbridge.

Flour investigation, in terms of physical and chemical pollutants and mineral content, is of great interest, in view of its high consumption for nutritional purposes. In this study, eleven types of flour (five samples for each one), coming from large retailers and employed by people for different cooking food purposes, were investigated through high-purity germanium (HPGe) gamma spectrometry, in order to estimate natural (40K) and anthropogenic (137Cs) radioisotope specific activity and thus, to assess the radiological risk due to the flour ingestion. Inductively-coupled plasma mass spectrometry (ICP-MS) and inductively-coupled plasma emission spectroscopy (ICP-OES) were also employed to evaluate any possible heavy metal contamination and the mineral composition, and to perform multivariate statistical analysis to deduce the flour authenticity. The evaluation of dose levels due to flour ingestion was performed, for the age category higher than 17 years, taking into account the average yearly consumption in Italy and assuming this need to be satisfied from a single type of flour as a precaution. All obtained results are under the allowable level set by Italian legislation (1 mSv y−1), thus excluding the risk of ionizing radiation effects on humans. As far as heavy metal contamination is concerned, Cd and Pb concentrations turned out to be lower than the threshold values, thus excluding their presence as pollutants. Finally, the multivariate statistical analysis allowed to unambiguously correlate flour samples to their botanical origin, according to their elemental concentrations.

We propose here a spectroscopic method to diagnose and differentiate inflammatory bowel diseases (IBD), such as ulcerative colitis (UC) and Crohn’s disease (CD) with pediatric onset, in a complete noninvasive way without performing any duodenal biopsy. In particular, the Raman technique was applied to proteic extract from fecal samples in order to achieve information about molecular vibrations that can potentially furnish spectral signatures of cellular modifications occurring as a consequence of specific pathologic conditions. The attention was focused on the investigation of the amide I region, quantitatively accounting the spectral changes in the secondary structures by applying deconvolution and curve-fitting. Inflammation is found to give rise to a significant increasing of the nonreducible (trivalent)/reducible (divalent) cross-linking ratio R of the protein network. This parameter revealed an excellent marker in order to distinguish IBD subjects from non-IBD ones, and, among IBD patients, to differentiate between UC and CD. The proposed methodology was validated by statistical analysis using the receiver operating characteristic (ROC) curve.

Neutron radiography (NR) was here applied to study the effects of two different commercially available consolidants on the water absorption properties in a particular type of limestone (biocalcarenite), known as Pietra d’Aspra stone, which is one of the most extensively used lithotypes in Sicilian Baroque buildings. Our attention was mainly focused on the evaluation, using a fast and nondestructive visualization of water motion through capillarity, of the effectiveness of such layers as consolidating agents in view of preserving and maintaining both old and modern structures. The biocalcarenite was treated with nanosilica (Nano Estel®) and nanolime (CaLoSil®) by brushing it until full saturation, and then artificially weathered by salt crystallization and temperature/relative humidity jumps. Liquid distribution and height of the water front were monitored as a function of time. Significant differences in the water suction behavior among all the investigated samples were highlighted, which allowed us to gain insight into the coating/substrate interaction mechanisms which regulate the fluid mobility inside the porous network of the limestone.