Search

The perovskite material has received much attention due to its excellent photoelectric properties. However, the toxicity of Pb has always affected the wide application of perovskite materials. Herein, we proposed to replace Pb ions with the same divalent ions Ba and dope them into the CsPbBr3 perovskite nanocrystals' (PNCs) lattice to reduce the content of Pb elements. In this work, we have successfully prepared a series of CsPb1−xBaxBr3 PNCs (x = 0, 0.1, 0.2, 0.3, and 0.4) and CsPbBr3 PNCs (Ba-doped concentration = x = 0, 0.05, 0.10, 0.15, and 0.20); the best among them were CsPb0.7Ba0.3Br3 PNCs and CsPbBr3 (Ba = 0.1) PNCs, respectively. Compared with CsPbBr3 PNCs, the photoluminescence (PL) intensity of CsPb0.7Ba0.3Br3 PNCs and CsPbBr3 (Ba = 0.1) PNCs has been improved to different degrees. It was worth mentioning that after the addition of a Ba element, the photoluminescent quantum yield (PLQY) of CsPb0.7Ba0.3Br3 PNCs and CsPbBr3 (Ba = 0.1) PNCs was increased to 81% and 65%, respectively. It was due to the high PLQY of CsPb0.7Ba0.3Br3 PNCs that the selected CIE color coordinate monochromatic light encompassed 119.0% of NTSC color gamut. [ABSTRACT FROM AUTHOR]

All-inorganic CsPbX3 (X = Cl, Br, I) perovskite nanocrystals (NCs) are the most promising next generation photoelectric materials owing to their excellent properties. Although embedding perovskite NCs into a glass matrix improves their stability, different applications require perovskite nanocrystal glasses (PNGs) with different properties. In this work, we controlled the network structure of the precursor glass by changing the content of ZnO (3.8–11.4 mol. %) in the raw materials, thus inhibiting the direct precipitation of CsPbCl2Br NCs in the glass (i.e., the self-crystallization process), and obtained samples with local emission and high transmittance. In addition, we incorporated rare-earth (RE) Yb3+ into a CsPbCl2Br PNG to achieve efficient ultraviolet (UV) to near-infrared quantum cutting emissions and boost the UV response of silicon photodetectors (PDs). Finally, after combining the Yb3+-doped CsPbCl2Br PNG on the Si PDs, the responsivity of the latter increased to 0.014 A/W at 320 nm, which is 14 times higher than that of the bare Si PDs. Moreover, Si PDs based on Yb3+-doped CsPbCl2Br PNG exhibited excellent photocurrent stability. [ABSTRACT FROM AUTHOR]

As a promising optoelectronic material, all-inorganic perovskite nanocrystals (NCs) have attracted much attention, but there are few studies on zero-dimensional Cs4PbBr6 perovskite NCs. Herein, the in situ growth of the CsPbBr3/Cs4PbBr6 NCs inside amorphous glass has been achieved by adjusting the ratios of Cs2CO3 and PbBr2. The effect of different proportions with raw materials on the phase, microstructure, and photoluminescence (PL) characteristics was discussed in detail. Moreover, CsPbBr3/Cs4PbBr6 NCs glass with high photoluminescence quantum yield (PLQY) of ∼58.9% was obtained by optimizing the heat treatment condition. In particular, CsPbBr3/Cs4PbBr6 NCs glass realizes low-threshold amplified spontaneous emission (ASE) at room temperature. Meanwhile, as a green light source, CsPbBr3/Cs4PbBr6 NCs glass makes white light-emitting diode (WLED) presents a wide color gamut. Importantly, CsPbBr3/Cs4PbBr6 NCs glass displays excellent water/thermal stability. All these results prove that CsPbBr3/Cs4PbBr6 NCs glass has broad application prospects in the field of lasers and backlight displays. [ABSTRACT FROM AUTHOR]

Perovskite nanomaterials have attracted significant attention in the field of nanoscale laser field, however, poor environmental stability is the biggest challenge that restricts their applications. In this study, an in situ synthesis method was used to encapsulate CsPbBr3 nanocrystals (NCs) in titanium silicalite molecular sieve (TS-1). Owing to the hollow structure and the hydrophobicity of the TS-1, the hydro and thermal stabilities of the perovskite NCs were significantly improved. Using AB glue, we prepared thin films using a one-step spin coating method, and synthesized highly compact and smooth CsPbBr3 nanocomposite thin films. Amplified spontaneous emission (ASE) was achieved with a low-threshold under two-photon excitation at room temperature, and a stable emission under continuous intense laser shots in an ambient atmosphere was maintained. The influence of the perovskite concentration and calcination temperature on the ASE threshold was also investigated. This study will significantly broaden the application of perovskite nanocrystals in practical nonlinear optical devices. [ABSTRACT FROM AUTHOR]