Search

In this paper, for the first time, to the best of our knowledge, we experimentally demonstrate the use of a curved organic light emitting diode (OLED) as a transmitter (Tx) in the non-line-of-sight (NLOS) optical camera communication (OCC) link for an indoor environment using a camera as a receiver. The proposed NLOS-OCC scheme is evaluated for the signal-to-noise ratio (SNR) and the reception success rates R r s under key photographic and communication parameters, including exposure times t e x p and gain values G v , as well as the transmission frequency f s and the distance L . The SNR analysis is performed using a binary classification procedure based on a Gaussian mixture model for the first time, to the best of our knowledge, for OLED-based NLOS-OCC links. We also derive and demonstrate that the effect of G v on the SNR with respect to L is minimal based on the pixel illumination model. The initial analysis suggests that, for a wall reflector-based NLOS-OCC link that is 2 m long, the SNR and R r s increase by 1 dB and 4% (83-87%) for f s of 600 Hz, with an increase in t e x p of 1000-1500 µs and G v of 25-45 dB.

Non-line-of-sight (NLOS) optical camera communications (OCC) exhibit greater link availability and mobility than line-of-sight links, which are more susceptible to blocking and shadowing. In this work, we propose an NLOS OCC system, where the data signal is mapped into color pulse width modulation (CPWM) symbols prior to transmission using a red-, green-, and blue light-emitting diode. A convolutional-neural-network-based receiver is used to demodulate the CPWM signal. Based on experimental results, the proposed scheme effectively mitigates the effects of diffuse reflection induced intersymbol interference, resulting in an increased data transmission rate to 7.2 kbps over a link span of more than 2 m, which is typical for indoor applications.

Wireless sensor networks (WSNs) are currently being deployed in everyday objects to collect and transmit information related to humidity, temperature, heartbeat, motion, etc. Such networks are part of the massive machine-type communication (mMTC) scenario within the fifth/sixth generation of wireless networks. In this paper, we consider the optimization and design of an optical WSN composed of multiple battery-powered sensor nodes based on light-emitting diode transmitters. Extending our previous work, we take into account both line-of-sight and diffuse-light propagation, and show that in indoor scenarios, diffuse radiation can improve link availability under shadowing/blocking and extend battery life. In order to optimize the optical wireless link parameters, we use a machine-learning approach based on a genetic algorithm to ascertain the performance limits of the system. The presented results indicate that the proposed system is a viable wireless option for WSNs within the context of mMTC.

With the increasing use of organic light emitting diodes in lights, smart phones, wearable smartwatches, and computers, visible light-based device-to-device (D2D) communications has become more and more relevant. We propose D2D communications using smart phones' display pixels and their built-in cameras. We investigate the impact of receiver orientation and user mobility on the link performance. We derive a Gaussian model for the probability density function of the delay spread and optical path loss (OPL), and show that the channel delay spread decreases for a typical furnished room compared with an empty room, whereas the former has an increased OPL. In addition, we show that for the case of a furnished room and considering user mobility, the peak OPL values are about 64 and 62 dB, with and without considering the receiver's random orientation, respectively.

In this paper, we provide a solution based on spatial frequency f sf to study the angular behavior of a flicker-free, short-range indoor multiple-input multiple-output (MIMO) optical camera communications (OCC) link. We focus on the experimental investigation of OCC's performance for the transmitters (Txs) [i.e., light-emitting diode (LED) based arrays] located at the same and different distances from the receiver (Rx) with the off-axis rotation angle θ . We have used two 8×8 distributed LED arrays and a commercial low-cost complementary metal-oxide-semiconductor (CMOS) Raspberry Pi camera with the rolling-shutter capturing mode as the Tx and Rx, respectively. The image and the respective communications link quality metrics are measured in terms of the peak signal-to-noise ratio (PSNR) and the rate of successfully received bits with respect to f sf for different camera shutter speeds (SS). A CMOS image sensor noise characterization is carried in terms of the signal-to-noise ratio (SNR) and PSNR. The proposed study provides a 100% success rate in data reception at the optimum θ of 50° at lower captured values of f sf , which is projected onto the image sensor in the form of pixels. Moreover, the effect of channel saturation over f sf is studied with respect to θ and SS and we show that, for θ exceeding the optimum value along transmission range, the f sf area of the Txs reduces to less than ∼50 % of the captured Tx units at θ of 0°, where no data can be fully recovered.

In this paper, we demonstrate experimentally that a vertical cavity surface emitting laser (VCSEL) exhibits an enhancement of nonlinear polarization dynamics, i.e., antiphase chaos synchronization and mode hopping, with optical feedback (OF). The rotating orthogonal polarization of a VCSEL is used as an external parameter to generate a chaotic signal when it is reflected back with a fixed bias current and strong OF signal. The intensity of the two linear polarization modes of the VCSEL is measured for a range of bias current, which provides detailed insights into its dynamic dependence. The results show that the antiphase chaotic synchronization is enhanced as the angle of orthogonal polarization of the OF is increased. Polarization modes are oscillated entirely in the chaotic regime in antiphase synchronization, with no time delay at the bias currents of 1.2 (low) and 1.7 mA (high). However, the synchronization quality of the two modes completely deteriorates when the bias current is increased to 1.7 mA at a polarization angle of 70°, where power mode differences are increased. This result shows that the power mode difference affects antiphase synchronization dynamics and thus destroys the mode-computation effects. In addition, polarization switching takes place at the polarization angles of 60° and about 33° at low and high bias currents, respectively. Polarization mode hopping is also observed, which is associated with improvement of the antiphase synchronization dynamics.

The ever-increasing number of vehicles on a global level signifies the need for communications between vehicles and the surrounding environment. Visible light communications (VLC) is a viable complementary technology to congested radio-frequency-based wireless systems. In order to increase the reliability of the VLC link, two novel algorithms based on (i) channel inversion (CI) and (ii) frame subtraction and CI (FSCI) schemes are proposed to successfully extract the data in a non-line-of-sight multiple-input-multiple-output spatial-division multiplexing optical camera communications system. We have adopted differential modulation and frame subtraction schemes and proposed a unique packet structure to mark the packet and the position of the footprint of transmitters (Txs) in the image frame. We show that the FSCI scheme with much simpler receiver structures can offer almost the same bit error rate performance compared with the hybrid selection/equal gain combining (HS/EGC) technique at lower transmit power (illumination) levels of <13dBm for a single Tx and improved performance at higher illumination levels of >20dBm for multiple Txs. Compared with HS/EGC, CI schemes have a higher tolerance to the spacing between Txs, where the payload threshold level can be set to a fixed value of 0.5.

Underwater optical wireless communications (UOWC) performance is affected by turbulence. However, not much research has been carried out to estimate the probability density function (PDF) of the received optical power. In this paper, we investigate the effect of turbulence on the UOWC system using a new experimental setup with a variable link span in a water pool. Different turbulence levels are created by changing the temperature and the rate of an injected water flow in the pool water to obtain the PDF. Results show that lognormal distribution closely matches the measured PDF for a range of link spans. In UOWC systems, the link span is one of the main factors influencing fluctuations of the received optical power, and it has not been thoroughly investigated. In this work, the scintillation index and turbulence-induced power loss are obtained for a range of turbulence strengths and transmission link spans. Finally, we show that there is a good agreement between the experimental and simulated results.

We propose, for the first time to the best of our knowledge, a novel non-line-of-sight 2×N indoor optical camera communication system, where N is the number of pixels in the camera with a unique packet structure and a detection methodology for extracting the data from the recorded video streams. A comprehensive theoretical model for the proposed system is presented. The proposed system is experimentally investigated, and the measured results show that higher International Standards Organization (ISO) levels and exposure times lead to a reduced transmit power level by 3 dB for every doubling of the exposure time and ISO at a bit error rate of 10 -3 . It is also shown that when the overlapping area of two interfering transmitters is larger than approximately 30% of the footprints, the data cannot be recovered.

Despite the benefits of free-space optical (FSO) communications, their full utilization is limited by the influence of atmospheric weather conditions, such as fog, turbulence, smoke, snow, etc. In urban environments, additional environmental factors such as smog and dust particles due to air pollution caused by industry and motor vehicles may affect FSO link performance, which has not been investigated in detail yet. Both smog and dust particles cause absorption and scattering of the propagating optical signal, thus resulting in high attenuation. This work investigates the joint impact of atmospheric turbulence and dust particle-imposed scattering on FSO link performance as part of the last-mile access network in urban areas. Propagation of an optical wave is at first analyzed based on the microphysic approach, and the extinction caused by small particles is determined. An experimental measurement campaign using a dedicated test chamber is carried out to assess FSO link performance operating wavelengths of 670 nm and 830 nm and under dust and turbulent conditions. The measured attenuation and the Q factor in terms of the velocity of particle flow and turbulence strength are analyzed. We show that for an airflow of 2 m/s, the Q factor is almost 3.5 higher at the wavelength of 830 nm than at 670 nm. However, for a wavelength of 670 nm, the FSO link is less affected by the increase in airflow compared to 830 nm. The Q factor reduces with turbulence. Under similar turbulence conditions, for ash particles, the Q factor is higher than that of sand particles.

Physical layer network coding (PNC) improves the throughput in wireless networks by enabling two nodes to exchange information using a minimum number of time slots. The PNC technique is proposed for two-way relay channel free space optical (TWR-FSO) communications with the aim of maximizing the utilization of network resources. The multipair TWR-FSO is considered in this paper, where a single antenna on each pair seeks to communicate via a common receiver aperture at the relay. Therefore, chip interleaving is adopted as a technique to separate the different transmitted signals at the relay node to perform PNC mapping. Accordingly, this scheme relies on the iterative multiuser technique for detection of users at the receiver. The bit error rate (BER) performance of the proposed system is examined under the combined influences of atmospheric loss, turbulence-induced channel fading, and pointing errors (PEs). By adopting the joint PNC mapping with interleaving and multiuser detection techniques, the BER results show that the proposed scheme can achieve a significant performance improvement against the degrading effects of turbulences and PEs. It is also demonstrated that a larger number of simultaneous users can be supported with this new scheme in establishing a communication link between multiple pairs of nodes in two time slots, thereby improving the channel capacity.

Joint effects of aperture averaging and beam width on the performance of free-space optical communication links, under the impairments of atmospheric loss, turbulence, and pointing errors (PEs), are investigated from an information theory perspective. The propagation of a spatially partially coherent Gaussian-beam wave through a random turbulent medium is characterized, taking into account the diverging and focusing properties of the optical beam as well as the scintillation and beam wander effects. Results show that a noticeable improvement in the average channel capacity can be achieved with an enlarged receiver aperture in the moderate-to-strong turbulence regime, even without knowledge of the channel state information. In particular, it is observed that the optimum beam width can be reduced to improve the channel capacity, albeit the presence of scintillation and PEs, given that either one or both of these adverse effects are least dominant. We show that, under strong turbulence conditions, the beam width increases linearly with the Rytov variance for a relatively smaller PE loss but changes exponentially with steeper increments for higher PE losses. Our findings conclude that the optimal beam width is dependent on the combined effects of turbulence and PEs, and this parameter should be adjusted according to the varying atmospheric channel conditions. Therefore, we demonstrate that the maximum channel capacity is best achieved through the introduction of a larger receiver aperture and a beam-width optimization technique.

The efficacy of spatial diversity in practical free-space optical communication systems is impaired by the fading correlation among the underlying subchannels. We consider in this paper the generation of correlated Gamma-Gamma random variables in view of evaluating the system outage probability and bit-error-rate under the condition of correlated fading. Considering the case of receive-diversity systems with intensity modulation and direct detection, we propose a set of criteria for setting the correlation coefficients on the small- and large-scale fading components based on scintillation theory. We verify these criteria using wave-optics simulations and further show through Monte Carlo simulations that we can effectively neglect the correlation corresponding to the small-scale turbulence in most practical systems, irrespective of the specific turbulence conditions. This has not been clarified before, to the best of our knowledge. We then present some numerical results to illustrate the effect of fading correlation on the system performance. Our conclusions can be generalized to the cases of multiple-beam and multiple-beam multiple-aperture systems.