Search

A laser-illuminated differential image motion monitor (DIMM) is presented that is able to measure the atmospheric coherence length r 0 along horizontal ground paths. This is accomplished by implementing a mono-static setup in which the transmitter and receiver are co-located and transmit to a retroreflective target. The impact of propagating along a folded path through the same volume of turbulent atmosphere is investigated in detail and the overall impact to angle-of-arrival measurements described. In addition, an outdoor test campaign was conducted to validate the findings by testing two commercial scintillometers and the laser DIMM side by side in both bi-static and mono-static configurations. Both analytical and experimental results show that under certain conditions, folded-path propagation can be treated identically to traditional single-path propagation.

Temperature-dependent diffuse reflectance measurements on Cr-doped α-alumina monoliths have been performed using supercontinuum-laser illumination and CO2-laser heating. These measurements have been interpreted using an extended Kubelka-Munk (K-M) model describing diffuse-light propagation in highly scattering and fluorescent media to assess the temperature dependence of fluorescence quantum efficiency. Analysis of experimental results has provided a qualitative understanding of the temperature-dependent conditions for model applicability and also suggests methods for using supercontinuum-laser diffuse reflectance spectroscopy for detection of unknown fluorescent dopants.

Supercontinuum-laser illumination in conjunction with CO

This study presents results for the high-temperature (up to 1550 K) optical properties of polycrystalline Cr-doped α-alumina materials. Diffuse reflectance spectra in the wavelength range of 510-840 nm are presented as a function of temperature to illustrate changes to the optical behavior of these materials including a previously unreported thermally activated splitting of the U-band absorption (A

Supercontinuum-laser illumination in conjunction with CO2-laser heating has been implemented to measure the near to short-wave infrared (970–1660 nm) diffuse reflectance of plasma-sprayed Nd2Zr2O7 as a function of temperature. Owing to the broadband nature of this experimental technique, the diffuse reflectance of plasma-sprayed Nd2Zr2O7 has been measured at many wavelengths and has been shown to decrease with increasing temperature. A physics-based model for diffuse reflectance predicated on the crystal/electronic band structure of highly scattering semiconductor materials has been constructed to interpret the results of these measurements. Baseline materials characterization has also been performed to assist in the development of crystal/electronic band structure-optical property relationships that could be useful for the design of next-generation environmental barrier coatings. This characterization has included ambient and non-ambient x-ray diffraction as well as room-temperature, integrating-sphere diffuse reflectance spectroscopy.

This study presents results for the high-temperature (up to 1550 K) optical properties of polycrystalline Cr-doped α-alumina materials. Diffuse reflectance spectra in the wavelength range of 510-840 nm are presented as a function of temperature to illustrate changes to the optical behavior of these materials including a previously unreported thermally activated splitting of the U-band absorption (A24→T24) in octahedrally coordinated Cr3+. Measurements were made using a unique laser-based approach for high-temperature solid-state spectroscopy, involving front-side supercontinuum laser illumination and back-side CO2 laser heating. This approach required development of samples that could withstand related thermal stresses, and measurements were made on plasma-sprayed, Cr-doped α-alumina monoliths. Measured spectra are interpreted, in part, using published optical spectra for ruby; agreement between results here with those obtained using more traditional methods serves to validate the measurement methods used for this work.

A laser differential image-motion monitor (DIMM) system was designed and constructed as part of a turbulence characterization suite during the DARPA free-space optical experimental network experiment (FOENEX) program. The developed link measurement system measures the atmospheric coherence length (r0), atmospheric scintillation, and power in the bucket for the 1550 nm band. DIMM measurements are made with two separate apertures coupled to a single InGaAs camera. The angle of arrival (AoA) for the wavefront at each aperture can be calculated based on focal spot movements imaged by the camera. By utilizing a single camera for the simultaneous measurement of the focal spots, the correlation of the variance in the AoA allows a straightforward computation of r0 as in traditional DIMM systems. Standard measurements of scintillation and power in the bucket are made with the same apertures by redirecting a percentage of the incoming signals to InGaAs detectors integrated with logarithmic amplifiers for high sensitivity and high dynamic range. By leveraging two, small apertures, the instrument forms a small size and weight configuration for mounting to actively tracking laser communication terminals for characterizing link performance.

This paper presents the first, to our knowledge, direct measurement of aerosol produced by an aluminized solid rocket propellant (SRP) fire on the ground. Such fires produce aluminum oxide particles small enough to loft high into the atmosphere and disperse over a wide area. These results can be applied to spacecraft launchpad accidents that expose spacecraft to such fires; during these fires, there is concern that some of the plutonium from the spacecraft power system will be carried with the aerosols. Accident-related lofting of this material would be the net result of many contributing processes that are currently being evaluated. To resolve the complexity of fire processes, a self-consistent model of the ground-level and upper-level parts of the plume was determined by merging ground-level optical measurements of the fire with lidar measurements of the aerosol plume at height during a series of SRP fire tests that simulated propellant fire accident scenarios. On the basis of the measurements and model results, the Johns Hopkins University Applied Physics Laboratory (JHU/APL) team was able to estimate the amount of aluminum oxide (alumina) lofted into the atmosphere above the fire. The quantification of this ratio is critical for a complete understanding of accident scenarios, because contaminants are transported through the plume. This paper provides an estimate for the mass of alumina lofted into the air.

A gimbal-free wide field-of-regard (FOR) optical receiver has been built in a laboratory setting for proof-of-concept testing. Multiple datasets are presented that examine the overall FOR of the system and the receiver's ability to track and collect a signal from a moving source. The design is not intended to compete with traditional free space optical communication systems, but rather offer an alternative design that minimizes the number and complexity of mechanical components required at the surface of a small mobile platform. The receiver is composed of a micro-lens array and hexagonal bundles of large core optical fibers that route the optical signal to remote detectors and electronics. Each fiber in the bundle collects power from a distinct solid angle of space and a piezo-electric transducer is used to translate the micro-lens array and optimize coupling into a given fiber core in the bundle. The micro-lens to fiber bundle design is scalable, modular, and can be replicated in an array to increase aperture size.

To develop a deeper understanding of the optical signatures of both biological aerosols and potential interferents, we made field measurements of optical cross sections and compared them to model-based predictions. We measured aerosol cross sections by conducting a hard-target calibration of a light detection and ranging system (LIDAR) based on the Frequency Agile Laser (FAL). The elastic backscatter cross sections are estimated at 19 long-wave infrared (LWIR) wavelengths spanning the range from 9.23 to 10.696 μm. The theoretical modeling of the elastic backscatter cross sections is based on the measured refractive index and size distribution of the aerosols, which are used as inputs into Mie calculations. Both model calculations and experimental measurements show good agreement and also indicate the presence of spectral features based on single particle absorption in the backscatter cross sections that can be used as a basis for discrimination for both standoff and point sensors.

In order to determine the performance of standoff sensors against agents, there is a need to develop methods to characterize the optical properties of biological warfare agents. The goal of this work is to develop a methodology that would allow the characterization of agent optical cross sections from the UV to the longwave IR. The present work demonstrates an optical measurement architecture based on lidar technology, allowing the measurement of backscatter and depolarization ratio from biological aerosols (either simulants or agents) released in a refereed, 1m3 chamber. Measured results on simulant materials are calibrated and compared to theoretical simulations of the cross sections.