Search

The influence of pulp carryover on the efficiency of the xylanase (X) treatment of industrial unbleached and oxygen-delignified eucalypt kraft pulps (A1 and A2 pulps, with kappa number (KN) values of 16 and 10, respectively), collected at the same pulp mill, was studied regarding the consumption of bleaching chemicals and pulp bleachability. Another non-oxygen-delignified eucalyptus kraft pulp of KN 13 was received after the extended cooking from a different pulp mill (pulp B). The assays were performed with both lab-washed (carryover-free) and unwashed (carryover-rich) pulps. Both lab-washed and unwashed pulps with carryover were subjected to X treatment, the former being demonstrating considerably higher ClO 2 savings than the pulps containing carryover. The savings of bleaching reagents were higher when the X stage was applied to the A1 pulp than to the A2 pulp. This advantage of A1 pulp, however, was not confirmed when using unwashed pulps. In contrast, the gains obtained from the X treatment of unwashed pulp A2 were practically as high as those observed for the lab-washed A2 pulp. Furthermore, a similar effect in X stage was recorded for unwashed pulps having close KN: oxygen-delignified A2 pulp and non-oxygen-delignified B pulp. The results suggest that pulp carryover and initial pH were the key factors relating to the effectiveness of X treatment. The application of X treatment to the A2 unwashed pulp (after the oxygen stage) not only saved 20% of the ClO 2 and 10% of the sodium hydroxide, but also improved the brightness stability of the bleached pulp without affecting its papermaking properties. KEY POINTS: • Xylanase treatment boosts kraft pulp bleaching • Pulp carryover hinders the xylanase treatment • Nearly 20% of ClO2 and 10% NaOH savings can be reached using xylanase., (© 2024. The Author(s).)

The reversible hydrolytic property of glycosyl hydrolases (GHs) as well as their acceptance of aglycones other than water has provided the abilities of GHs in synthesizing glycosides. Together with desirable physiochemical properties of glycosides and their high commercial values, research interests have been aroused to investigate the synthetic other than the hydrolytic properties of GHs. On the other hand, just like the esterification processes catalyzed by lipases, GH synthetic effectiveness is strongly obstructed by water both thermodynamically and kinetically. Medium engineering by involving organic solvents can be a viable approach to alleviate the obstacles caused by water. However, as native hydrolyases function in water-enriched environments, most GHs display poor catalytic performance in the presence of organic solvents. Some GHs from thermophiles are more tolerant to organic solvents due to their robust folded structures with strong residue interactions. Other than native sources, immobilization, protein engineering, employment of surfactant, and lyophilization have been proved to enhance the GH stability from the native state, which opens up the possibilities for GHs to be employed in unconventional media as synthases. KEY POINTS: • Unconventional media enhance the synthetic ability but destabilize GHs. • Viable approaches are discussed to improve GH stability from the native state. • GHs robust in unconventional media can be valuable industrial synthases.

The redox-sensing transcriptional repressor Rex (Rex) displayed diverse functions in different microbial species. Nowadays, only part function of rex has been verified in vitro and alcohol dehydrogenase gene (adhE) as the target of Rex has been widely reported. In this study, rex was knocked out in Thermoanaerobacterium aotearoense SCUT27 (GDMCC 60765) and the carbon metabolic distribution analysis was performed. Results showed that the ethanol yield (mol product/mol carbon) of SCUT27(Δrex) had increased by 75.00-90.91%, cell growth improved by 27.27-36.36%, and acetic acid and lactic acid decreased by 58.33-61.54% accompanied with the yield of hydrogen decreased by 46.15-58.35% within different carbon sources. The ability of sugar consumption of SCUT27(Δrex) had improved about 74.19-130.55% with the improvement of total ATP concentration and the cofactors NADH and NAD + concentrations. In addition, the specific activities of alcohol dehydrogenase of SCUT27(Δrex) with NADH and NADPH as cofactors were improved by 119.26-140.28% and 35.66-47.69%, respectively. After ldh was further knocked out in SCUT27(Δrex), SCUT27(ΔldhΔrex) showed higher ethanol production and yield when various carbon resources were used as substrates (including glucose, xylose, glucose/xylose mixture and three kinds of lignocellulosic hydrolysates). This study confirms that Rex is an important regulator for determining products distribution in SCUT27 and deletion of rex and ldh is a promising strategy for enhanced ethanol production.

α-Glucosidase, Agl2, from Xanthomonas campestris was successfully overexpressed in Escherichia coli BL21(DE3) cells and purified with Ni columns. The enzyme exhibits glycosylation abilities towards a wide range of phenolic substrates, including phenol, vanillin, and ethyl vanillin, with maltose as the glycosyl donor. The catalytic properties of the purified enzyme were further investigated. It was observed that the synthesized glycosides started to degrade with prolonged catalytic time, giving an "n"-shaped kinetic profile. To understand such catalytic behavior, the Agl2-catalyzed glycosylation process was investigated kinetically. Based on the obtained parameters, it was concluded that although the substrate conversions are thermodynamically restricted in a batch system, the glycosylation efficiency can be kinetically controlled by the glycosylation/hydrolysis selectivity. Glucose was produced by both glycosylation and hydrolysis, significantly impacting the glycosylation efficiency. This study provides a mechanistic understanding of the α-glucosidase-catalyzed glycosylation process in a water-based system. The developed kinetic model was successful in explaining and analyzing the catalytic process. It is suggested that when α-glucosidase is employed for glycosylation in a water-enriched environment, the catalytic efficiency is mainly impacted by the enzyme's glycosylation/hydrolysis selectivity and glucose content in the catalytic environment.

Pseudomonas sp. JY-Q was isolated from nicotine-rich environment and could degrade and tolerate high-content nicotine. Its specific genetic architecture comprised duplicated homologous nicotine-degrading clusters for different functional modules on the whole pathway. Its adaptive and genomic properties caused our concern whether the duplicated homologous gene clusters confer additive effects on nicotine degradation and result in strain JY-Q strong capability. After deletion of representative genes from duplicated homologous gene clusters of upstream module Nic1, midstream module Spm, and downstream module Nic2, the nicotine degradation efficiency of the wild type and mutant strains were examined. As the first genes of clusters Nic1-1 and Nic1-2, nicA2 and nox are both involved in nicotine degradation, but nox exhibited more contribution to nicotine metabolism due to the higher transcriptional amount of nox than that of nicA2. Likewise, the sub-clusters spm1 and spm2 showed additive effect on nicotine metabolism. As two hpo-like genes of clusters Nic2-1 and Nic2-2, hpo1, and hpo2 also showed additive effect on the nicotine degrading, but hpo1 provided more contribution than hpo2. The third hpo-like gene in cluster NA (nicotinic acid degrading), nicX is not necessary for 2,5-dihydroxypyridine transformation when hpo1 and hpo2 exist. A variety of transposases and integrases observed around Nic1 and Nic2 cluster genes suggests that the duplicated genes could evolve from horizontal gene transfer (HGT)-related dissemination. This study provide an insight into a novel adaptability mechanism of strains in extreme environment such as high nicotine concentration, and potential novel targets to enhance strain synthesis/degradation ability for future applications.

Vitamin B1 (VB1) is an essential coenzyme for carbohydrate metabolism and involved in energy generation in most organisms. In this study, we found that insufficient biosynthesis of VB1 in Clostridium acetobutylicum ATCC 824 is a major limiting factor for efficient acetone-butanol-ethanol (ABE) fermentation. In order to improve the fermentation performance of C. acetobutylicum ATCC 824, the VB1 biosynthesis pathway was strengthened by overexpressing the thiC, thiG, and thiE genes. The engineered strain 824(thiCGE) showed enhanced VB1 and energy synthesis, resulting in better growth, faster sugar consumption, higher solvents production, and lower acids formation than the wild-type strain in both VB1 free and normal P2 medium (1 mg/L). Compared with the wild-type strain, 824(thiCGE) produced 13.0 ± 0.1% or 12.7 ± 1.2% more butanol in VB1 free P2 medium when glucose or xylose was used as the substrate, respectively. When mixed sugar (glucose:xylose = 2:1) was used as the substrate in VB1 free P2 medium, the xylose consumption rate and butanol titer of 824(thiCGE) were 45.8 ± 1.9% and 20.4 ± 0.3% higher than those of the wild-type strain. All these results demonstrated that this metabolic engineering strategy could provide a new and effective way to improve the cellular performance of solventogenic clostridia. In addition, it may have some potential application value in ABE fermentation using simple medium and/or lignocellulosic biomass.

The aim of this work was to study the solid waste (manure) produced by catfish as a potential feedstock for the production of lactic acid (LA) via fermentation. The solid waste contains high levels of both carbohydrates and nutrients that are sufficient for LA bacteria. Simultaneous saccharification and co-fermentation (SSCF) was applied using enzyme and Lactobacillus pentosus, and different loadings of enzyme and solid waste were tested. Results showed LA concentrations of 35.7 g/L were obtained at 15% solids content of catfish waste. Because of the high nutrient content in the fish waste, it could also be used as supplementary substrate for nitrogen and carbon sources with other lignocellulosic materials. A combined feedstock of catfish waste and paper mill sludge was tested, increasing the final LA concentration to 43.1 g/L at 12% solids loading. The catfish waste was shown to be a potential feedstock to provide both carbon and nutrients for LA production, suggesting its use as a sole substrate or in combination with other lignocellulosic materials.

Butyric acid fermentation by Clostridium couples with the synthesis of acetic acid. But the presence of acetic acid reduces butyric acid yield and increases separation and purification costs of butyric acid. Hence, enhancing the butyrate/acetate ratio is important for economical butyric acid production. This study indicated that enhancing the acetyl-CoA to butyrate flux by overexpression of both the butyryl-CoA/acetate CoA transferase (cat1) and crotonase (crt) genes in C. tyrobutyricum could significantly reduce acetic acid concentration. Fed-batch fermentation of ATCC 25755/cat1 + crt resulted in increased butyrate/acetate ratio of 15.76 g/g, which was 2.24-fold higher than that of the wild-type strain. Furthermore, in order to simultaneously increase the butyrate/acetate ratio, butyric acid concentration and productivity, the recombinant strain ATCC 25755/ppcc (co-expression of 6-phosphofructokinase (pfkA) gene, pyruvate kinase (pykA) gene, cat1, and crt) was constructed. Consequently, ATCC 25755/ppcc produced more butyric acid (46.8 vs. 35.0 g/L) with a higher productivity (0.83 vs. 0.49 g/L·h) and butyrate/acetate ratio (13.22 vs. 7.22 g/g) as compared with the wild-type strain in batch fermentation using high glucose concentration (120 g/L). This study demonstrates that enhancing the acetyl-CoA to butyrate flux is an effective way to reduce acetic acid production and increase butyrate/acetate ratio.

Oleanolic (OA) and ursolic acid (UA) are plant secondary metabolites with diverse pharmacological properties. To reach reasonable productivities with plant cell suspension cultures, elicitation is a widely used strategy. Within the presented work, the effects of different elicitors on growth and production of OA and UA in a Salvia fruticosa cell suspension culture were examined. Beside commonly used elicitors like jasmonic acid (JA) and yeast extract, the influence of medium filtrates of the endophytic fungi Aspergillus niger and Trichoderma virens was investigated. The best eliciting effects were achieved with JA and fungal medium filtrates. Both increased the triterpene content by approximately 70 %. Since JA showed significant growth inhibition, the volumetric triterpene yield did not increase. But, adding fungal filtrates increased the volumetric triterpene yield by approximately 70 % to 32.6 mgOA l(-1) and 65.9 mgUA l(-1) for T. virens compared to the control with 19.4 mgOA l(-1) and 33.3 mgUA l(-1). An elicitation strategy combining fungal medium filtrate of T. virens with sucrose feeding significantly enhanced cell dry weight concentration to 22.2 g l(-1) as well as triterpene content by approximately 140 %. In total, this led to an approximately 500 % increase of volumetric triterpene yield referring to the control with final values of 112.9 mgOA l(-1) and 210.4 mgUA l(-1). Despite the doubled cultivation duration, productivities of 6.7 mgOA l(-1) day(-1) and 12.4 mgUA l(-1) day(-1) were reached. These results demonstrate methods by which increased productivities of triterpenes can be achieved to attain yields competing with intact plants.

The development of bacterial cellulose (BC) fibrils biosynthesized by Gluconacetobacter xylinus was investigated using atomic force microscopy (AFM). After various incubation times at 30 °C, both the length of BC fibrils and their average diameters increased significantly. After the first 2-h incubation, not only single BC microfibrils with an average diameter of 5.8 ± 0.7 nm were biosynthesized but single microfibrils also began to bind with each other forming bundles. After longer incubation times of 6 h, 16 h, and 48 h, only BC bundles and ribbons or even only ribbons were detectable. The development of BC fibrils and the formation of BC bundles/ribbons along with the biosynthesis time were illustrated using AFM. Furthermore, single BC fibrils were twisted in a right-handed manner. The twisting of BC fibrils possibly promoted the formation of bigger ribbons.

Although economically efficient biomass conversion depends on the utilization of the complete cell wall (biorefinery concept), including polysaccharides and lignin, current biofuels research concentrate mostly on cellulose conversion, while lignin is viewed as a side-product that is used primarily as a thermal resource. Microbiological conversion of lignin is almost exclusive to fungi, usually resulting in increased cell mass and lignolytic enzymes. Some bacteria can also degrade lignin-related compounds using the β-ketoadipate pathway; for example, Rhodococcus opacus DSM 1069 can degrade coniferyl alcohol and grow on it as sole carbon source. Moreover, this strain belongs to the actinomycetes group that is also known for oleaginous species with lipid accumulation over 20%. Present work shows that R. opacus DSM 1069 and PD630 strains under nitrogen limiting conditions can convert lignin model compounds into triacylglycerols, also known as neutral lipids. 4-Hydroxybenzoic and vanillic acid lignin model compounds were used as sole carbon sources, and after brief adaptation periods, the cells not only began growing but accumulated lipids to the level of oleaginicity. These lipids were extracted for transesterification and analysis of fatty acid methyl esters showed good composition for biodiesel applications with no aromatics. Furthermore, the two strains showed distinct substrate metabolism and product profiles.

Biocatalytic acylation of 1-β-D-arabinofuranosylcytosine (ara-C) was developed using whole cell of Aspergillus oryzae as a novel catalyst. (13)C nuclear magnetic resonance (NMR) analysis indicated that the whole-cell biocatalyst had more specific activity toward the 3'-hydroxyl group than 5'-hydroxyl group among the available hydroxyl groups in sugar moiety of ara-C. Except for glucose and maltose, 11 carbon sources supplemented to basal media, including Spans, Tweens, olive oil and oleic acid, exhibited notable enhancement effects on both the cell growth and the acylation reactions. It was suggested that the carbon sources containing controlled-release oleic acid were the important substrates for the production of fungal cell-bound lipase with specific activity, partially due to a gradual induction effect of their released oleic acid on the cell-bound lipase production. Despite the low initial reaction rate and substrate conversion, the addition of 2.0 g/l Span 80 resulted in a higher 3'-regioselectivity of the cells than 81%. By using Tween 85 at its optimum concentration of 5.0 g/l, however, the highest initial rates (3.2 mmol/l h) and substrate conversion (76%) of the whole-cell catalyzed acylation of ara-C can be achieved. It was also found that the 3'-regioselectivity of the cells showed observable increase by extending the culture time. And the activity of cell-bound lipase drastically increased in the early stage of cell growth and then declined in the late culture stage, whatever the culture media used. Our results thus indicated that A. oryzae whole cell was a promising green tool for biosynthesis of nucleoside esters with potential bioactivities.

Diminishing fossil fuel resources as well as growing environmental and energy security concerns, in parallel with growing demands on raw materials and energy, have intensified global efforts to utilize wood biopolymers as a renewable resource to produce biofuels and biomaterials. Wood is one of the most abundant biopolymer composites on earth that can be converted into biofuels as well as used as a platform to produce bio-based materials. The major biopolymers in wood are cellulose, hemicelluloses, and lignin which account for >90% of dry weight. These polymers are generally associated with each other in wood cell walls resulting in an intricate and dynamic cell wall structure. This mini-review provides an overview of major wood biopolymers, their structure, and recent developments in their utilization to develop biofuels. Advances in genetic modifications to overcome the recalcitrance of woody biomass for biofuels are discussed and point to a promising future.

The purpose of this study was to determine the effect of enrichment procedure on the performance and microbial diversity of an air-cathode microbial fuel cell (MFC) which was explored for simultaneous azo dye decolorization and electricity generation. Two different enrichment procedures in which glucose and Congo red were added into the MFCs sequentially (EP1) or simultaneously (EP2) were tested by operating parallel MFCs independently for more than 6 months. The power density, electrode potential, Congo red decolorization, biofilm morphology, and bacterial diversity of the MFCs under the two enrichment procedures were compared and investigated. The results showed that the enrichment procedures have a negligible effect on the dye decolorization, but significantly affected the electricity generation. More than 90% decolorization at dye concentration of 300 mg/L was achieved within 170 h for the two tested enrichment procedures. However, the MFC with EP2 achieved a maximum power density of 192 mW/m(2), which was 75% higher than that of the MFC with EP1 (110 mW/m(2)). The depressed surfaces of the bacteria in the MFC with EP1 indicated the allergic response caused by the subsequent addition of Congo red. 16S rRNA sequencing analysis demonstrated a phylogenetic diversity in the communities of the anode biofilm and showed clear differences between the anode-attached populations in the MFCs with a different enrichment procedure. This study suggests that the enrichment procedure is important for the MFC explored for simultaneous dye decolorization and electricity generation.

In this paper, highly regioselective enzymatic acylations of 1-beta-D-arabinofuranosylcytosine (ara-C) with vinyl stearate (VS) in binary organic solvents were explored for the preparation of 5'-O-stearate of ara-C with potential antitumor activity. Twelve kinds of hydrolases were tested for the regioselective acylation reaction and the immobilized Candida antarctica lipase B (Novozym 435) showed the highest regioselectivity (>99.9%) towards the 5'-OH of ara-C. A comparative study showed that the lipase had much higher catalytic activity in the binary mixture of hexane and pyridine than in other tested co-solvent systems. To better understand lipase-mediated acylation conducted in the best binary organic solvent system, the effects of hydrophobic solvent content, molar ratio of VS to ara-C, initial water activity, and reaction temperature on the acylation reaction were studied. It was found that the most suitable hexane content, VS-ara-C molar ratio, initial water activity, and reaction temperature were shown to be 25% (v/v), 20:1, 0.07, and 50 degrees C, respectively. Under these reaction conditions, the initial reaction rate, the maximum substrate conversion, and regioselectivity were as high as 86.0 mmol.L(-1)h(-1), 96.6%, and >99.9%, respectively. The product of Novozym 435-catalyzed acylation was characterized by Carbon-13((13)C) NMR and confirmed to be 5'-O-stearate of ara-C.

A family I cellulose-binding domain (CBD) and a serine- and threonine-rich linker peptide were cloned from the fungi Aspergillus japonicus and Aspergillus aculeatus. A glutathione S-transferase (GST) fusion protein comprising GST and a peptide linker with the CBD fused to its C-terminus, was expressed in Escherichia coli. The renatured GST-CBD recovered from inclusion bodies had a molecular mass of 36.5 kDa which agrees with the 29 kDa of the GST plus the calculated 7.5 kDa of the linker with the CBD. The isolated GST-CBD protein adsorbed to both bacterial microcrystalline cellulose and carboxymethyl cellulose. Deletion of the linker peptide caused a decrease in cellulose adsorbance and a higher sensitivity to protease digestion.