Search

It is becoming a development direction to study green forming process in mechanical. The processing technology of machining deep hole in relative thin sheet is a kind of green mechanical processing technology in this paper. The process uses the friction between driller and workpiece and plasticity of workpiece to form hole. The new technological process not only saves material, but also saves man-hours, and the workpiece has a good piece of assembly. In this paper, the forming process of deep hole on thin sheet was simulated, and some effect factors of forming hole were studied, such as the stress, temperature and shape of forming area, etc. The forming simulation is proved to be feasible by the test in this paper. The study results are useful to improve the machining parameters, and laid a foundation for further research on forming deep holes process on thin sheet metal by friction heat.

The simultaneous removal of SO2 and NO was investigated with the activated carbon from sewage sludge (referred as ACS) modified by chitosan (referred as CS).The effects of CS loading and operating conditions on the simultaneous removal of SO2 and NO were analyzed. The results indicate that compared with the ACS, impregnating CS results in significant increase in SO2 or NO removal. Relative humidity enhances SO2 adsorption capacities, but not for NO. The SO2 adsorption capacities of the CS / ACS show no obvious decrease at small amount of NO in the feed. However, higher amounts of NO reduce the SO2 adsorption capacities. The opposite phenomenon appears for NO when a small amount of SO2. So a competitive sorption consists between NO and SO2. Simultaneous adsorptions for NO and SO2 is due to more active sites from CS.

Bayesian method was introduced and leaded into the vehicle fault data processing. The parameter estimation and the selection of the optimal distribution model based on Bayesian method were studied, and an example was given. The references are provided for the application of Bayesian method in the large complicated systems, such as vehicle equipments.

This paper reviews shearography and its applications for testing of aircraft composite structures and honeycomb-based specimen. Shearography is a laser-based interferometry in conjunction with the digital imaging processing technique for full-field measurement of surface deformation. It reveals defects in an object by looking for defect-induced deformation anomalies. It does not require special vibration isolation, and with the development of a small and mobile measuring device (portable inspection system), it can be employed easily in field/factory environments.