Search

Screw rotor is a vital factor affecting the working efficiency of twin screw air compressor. Therefore, a type of twin screw air compressor in coal mine production process is taken as the research object. Firstly, the working principle and process of female and male rotor was introduced and analyzed. Then, according to the principle of parameter selection of the female and male rotor, the relevant design parameters of the female and male rotor are given. Finally, the vector equation and the tooth surface equation of the segmented line are deduced and established respectively for the end face profile and end face tooth surface of the rotor, the area and volume of the tooth are also calculated. The equation of the tooth surface is set up by rotation of rotor’s tooth direction, the inter-tooth area is composed of multi-section smooth curve and the top arc connected to form a circle, which can be obtained by means of analytical method. In order to better meet the requirements of the machining process, it is necessary to coordinate the female and male rotor profile on the coordinate axis when the end face of the rotor is non-symmetrical. This paper provides an important reference for selecting parameters of the rotor of the female and male and calculation of rotor profile.

Based on the test of abnormal exterior joints of Steel Reinforced Concrete (SRC) column and Reinforced Concrete (RC) beam, the paper analyzed the influence on crack resistance behavior by ABAQUS, of the eccentricity of column section, the steel ratio of the joints zone, the concrete strength and the axial compression ratio and so on. The study indicates that the anti-crack capacity of the joints mainly depends on “the minor joint zone”. Based on the computing unit of minor joint core zone, the calculating formula of anti-crack capacity of the joints is deduced.

The paper presents an test and computational results of finite element studies on the behavior and capacity of abnormal exterior joints of Steel Reinforced Concrete (SRC) column and Reinforced Concrete (RC) beam. The critical parameters influencing Anti-Shear Capacity are analyzed by ABAQUS, such as the eccentricity of column section, the steel ratio of the joint core zone, the concrete strength and the axial compression ratio and so on. As a result, the Anti-Shear capacity of the joints mainly depends on “the minor joint zone”. The calculating formula of Anti-Shear capacity of the joints, with the computing unit of minor joint core zone, is deduces.

It is inevitable requirement of modern engineering rapid design for outdoor double intelligence cabinet.Taking VB as the tool,rapid parameter module of geometric parameters and boundary conditions of double intelligent cabinet was designed，the exhaust air of fan as adjustable object,then Fluent software for numerical simulation of temperature was called quickly ,using VB to display Fluent calculation results,the rapid parameter module can timely show the significant influence of exhaust air to the inside temperature.It has important guiding significance to practical engineering.

Chinese garden art originates from Shang and Zhou Dynasties,drives to maturity in Song Dynasty nurtured by the renovation and development of Wei, Jin, Sui, Tang, Northern and Southern Dynasties. Affected by the situation of valuing literary talent above martial arts, Song Dynasty garden art made a great progress in the aspect of thinking, architecture, plants, rockery and layout of waters, the interests and artistic of paintings and poems became the most notable characteristic of gardens built in Song dynasty. Its space principle and aesthetics taste are totally different from the western gardens, which have a lot of features worthy to be learned and used in modern garden and urban designing of China.

Characteristics of the subway project is complex, concealed, lot of potential risks. Aiming these features, in order to reduce the risk of the project and improve the rationality and accuracy of subway risk assessment, the main risk factors in the subway are analyzed and identified by methods of expert investigation and checklists, and the risk index system is established, based on research of the subway construction risk mechanism. Then the membership of each evaluation factor is determined by the expert experience method, and the weight of each risk factor is determined through the method of analytic hierarchy process (AHP). Eventually, the subway engineering risk assessment model is established based on the fuzzy comprehensive evaluation method. Finally, the project example verifies the rationality of the risk assessment model.

Compare and analysis the transient identification in Nuclear Power Plant fault diagnosis method. According to how does these methods for nuclear power plant systems HTR effect, Further proposed to a problem that towards existing transient recognition of methods to verification effectiveness. Preliminary analysis of the three kinds of validation strategy, after a comparative demonstration, it is formed the preliminary research on the utility analysis framework. Utility to verify the framework for the Nuclear Power Plant fault diagnosis methods carry out intensive research provides a theoretical basis.

Large-scale grid-connected photovoltaic generators will cause out-of-limit of voltage deviation. The model of voltage drop caused by loads and voltage rise caused by PV generators are established under different loads or PV distribution modes along the line, and the maximum allowable capacity of PV power injected into the grid without causing over-voltage is calculated, assuming the bus voltage deviation reaching the upper limit. The maximum PV penetration level of typical distribution lines is derived under the condition that PV generators is of the same distribution mode with loads, and the voltage margin at the head end of the line without causing over-voltage is proposed. The results show that over-headlines can carry much more PV power than cables, and over-voltage will be avoided by controlling the PV power according to the connected bus voltage, and suitably lowering the bus voltage will allow more PV to connect into the grid.

The variation and dynamics of fat, fatty acid value and dissolution rate of protein of soybean under four storage temperatures conditions were studied. Dynamical model between the value of fatty acid and storage time, storage temperature was build according to the first-order kinetic equation which could predict and control the quality changes of soybeans during storage. The results showed that fat content of soybean and solubility ratio of protein were decreased with the extension of storage but the fatty acid value was increased. The shelf life was predicted according to the change of value of fatty acid during storage. Shelf life prediction model of any temperature between 5~35°C was established used Arrhenius equation and Q10 model and the error rate is less than 10%.

This article expounds the latest developments of key technology about carrier aggregation of LTE-A, and introduces cross carrier scheduling. Then it mainly studies the control signaling, reconfiguration message sent from upper layers defined by 3GPP protocol, and Physical Downlink Control Channel (PDCCH) blind decoding method which supports cross carrier scheduling. Finally, with correct simulation results, it shows that the method meets the requirement of 3GPP, and provides a theoretical basis for realizing detection of PDCCH in LTE-A system.

The paper uses the microbubble flotation device made by ourselves to clean the water in the Dianchi Lake, the microbubble is produced by electrolysis, the testing and results analysis showed that shortening the distance of electrodes and adding a little amount of electrolyte can effectively reduce energy consumption. Excessive pursuit of the treatment effect is not conducive for reducing energy consumption. An optimization of the current density and processing time is important. It provides good valuable reference for microbubble flotation water treatment.

In order to study the swirl flow characteristics in the solid fuel ramjet chamber, a new type of annular vane swirler with NACA airfoil is designed. The cold swirl flow field in the chamber is numerically simulated with different camber and t attack angle, while the swirl number , swirl flow field structure, total pressure recovery coefficient were studied. According to numerical simulation result, the main factors in swirl number are camber and angle of attack, the greater angle of attack, the greater the camber ,the stronger swirl will be. Results show that the total pressure loss is mainly concentrated in the inlet section, the total pressure loss cause by vane swirler is small. Radial velocity gradient exists in swirling flow, and increases with the swirl number. With the influence of centrifugal force and combustion chamber structure, the radial velocity gradient increases.

The BaF2: Ce3+, Yb3+ nanoparticles doped with different concentration were prepared by a hydrothermal method. The structure,morphology and photoluminescence properties were studied. In BaF2: Ce3+, Yb3+ nanoparticles, a strong near infrared emissionat 900 – 1050 nm matching to energy of Si band gap of Si-based solar cells was observed under the excitation of 5d level of Ce3+. As a downconversion luminescent convertor, the kinds of materials have potential to be applied in front of Si-based solar cells to reduce thermalization loss and enhance conversion efficiency of solar cells.

This paper is based on the research of the coal water slurry rheological property and stability. The influence of the concentration, additives and temperature on the rheological properties of the slurry has also been studied. The apparent viscosity increases with increasing concentration of coal water slurry, and decreases with increasing temperature. An introduction of additives can greatly improve the rheological properties of coal water slurry. The stability of coal water slurry increases with the increase of concentration, and the stability decreases with the increase of temperature. A proper amount of additives can improve its stability.

An antibacterial agent (ZPU) was prepared by surface modification of nanoZnO with aliphatic aqueous polyurethane (WPU) and polyacrylates sodium of lower molecular weight (LPAA). Then two kinds of cotton fabrics were dipped in ZPU and finally finished by paking-baking process. ZPU and the finished cotton fabrics were characterized by SEM, TEM and DLS. The antimicrobial properties of the cotton fabrics were investigated. The results indicated that ZnO retained nanosize with little aggregation on the fabric surface. The finished cotton fabrics showed obviously antibacterial activity againstS. aureusandE. coliwith the 24 h antibacterial rate of 99%.

A new gel type slow-release solid chlorine dioxide was prepared by mixing two gels together, which were Super Absorbent Polymer (SAP) absorbing sodium chlorite solution and solid acid solution, respectively. The optimal formula was determined by single factor experiment, and the effect of the temperature on chlorine dioxide release rate was investigated. Using tartaric acid as the solid acid, the release rate peak value of chlorine dioxide is 1.61 mg/h, and the release rate become slower of 1.09 mg/h at 72 h and 0.6 mg/h at 144 h, which shows a smooth and sustaining release process. When the volume of water is 25 mL, the optimal formula is SAP:3.5g, sodium chlorine:1.5g, anhydrous sodium sulfate:1.5g, tartaric acid:2g. The release process became more intense when the temperature became higher. The results indicated that this gel type slow-release solid chlorine dioxide should be suitable for eliminating formaldehyde and stink in the environment.

The optical functionalized YVO4: Eu3+/MCM-41 mesoporous composites were prepared by hydrothermal method. The structure, morphology, luminescence properties and fluorescence dynamics were studied systemically. The compared studies of the luminescence properties of YVO4: Eu3+/MCM-41 with YVO4: Eu3+ nanocrystal were performed. The results show that the YVO4: Eu3+/MCM-41 retains high ordered mesoporous structure of MCM-41. In YVO4: Eu3+/MCM-41, the intrinsic excitation bands of Eu3+ disappears and the lifetimes of Eu3+ become short. The luminescent efficiency of YVO4: Eu3+/MCM-41 is higher than ones of the YVO4: Eu3+ nanocrystal.

To make sure the feasibility of the three-point arc interpolation in any space after the MATLAB simulation, we applied it in FPGA (Field Programmable Gate Array, FPGA), finished the PCB board design, and used the arc interpolation controller to control the robot mechanical in this article. By analyzing the actual path, we found the results match the design requirements. The space controller guarantees the real-time and accuracy requirements of arc interpolation, and will have excellent practical value.

BMH is a new type of inorganic antibacterial agent. However, there is few study about BMH application in plastic film. So, in this study, BMH/PE films prepared by rolled was investigated in antimicrobial, mechanical and optical properties with different BMH contents. The results showed that the antibacterial properties increased with the BMH content, and the antibacterial films had strong antibacterial function when the adding amount of BMH was equal or greater than 2%. The mechanical properties firstly increased with the BMH content and then rapidly decreased. The optical properties decreased with BMH content. Taking all properties of the film into account in the study, the antimicrobial film contained 1% BMH was best.

The design solution presented in this article is a pressure data acquisition system which is based on the piezoresistive pressure sensor and MSP430F249 microcontroller. It can be simulated on the Protues7. FlexiForce-A201 sensor can be seen as a variable resistance in the circuit. Using the signal conditioning circuit and on chip components ADC12 and DAC12 to realize the 8 channels of analog signals and transformation and the A/D conversion accuracy is 12-bit. The results of transformation can be both stored in the M45PE16 flash and real-time displayed on the LCD1602. This system used the on-chip peripherals and powered by button cell. This solution can realize the independence of system and data source by joining up various sensors. It is simple, low-power and universal.

This paper analyzes and studies the definition of the voltage transformer secondary load, examines the practical purposes of the measured values of the voltage transformer secondary load, and presents a variety of testing methods to analyze and compare the differences. This paper gives the test methods of the voltage transformer secondary load when the connection of the voltage transformer is the Y / Y in a three-phase three-wire power supply system, filling the blank of this type of test method in the industry. When other units within the industry carry out such work, the conclusions of this paper are available for reference, and the conclusions of this paper can be referred when drafting relevant regulations in the future.

MgxZn1-xO films with hexagonal structure are prepared by radio frequency (rf) magnetron sputtering on Si substrate. The refractive indices and absorption coefficients of these films in the wavelength range from 300 to 800nm are determined by using ellipsometry at room temperature. The results show that the refractive index increases as the wavelength decreases in the transparent region (400-800nm). It reaches its maximum value around 340nm and 331nm, which is close to the fundamental absorption edge. Then the refractive index decreases as the wavelength gets shorter. The value of the refractive index is also a function of the Mg content. The higher the Mg content is in the film, the smaller the refractive index of the film is in the wavelength range from 330nm to 850nm. The band gap energy of the MgxZn1-xO film is obtained by analyzing its absorption spectrum. An increase in the Mg content causes the fundamental absorption edge to shift toward shorter wavelength. In addition, UV and strong blue emission have been observed when the MgxZn1-xO film is excited with light wave of 260nm at room temperature, and the emission mechanism is discussed.

This paper presents selected similar days of short-term power load forecasting model based on fuzzy clustering, the method first meteorological factors subdivided into temperature, barometric pressure, wind speed, rain, etc., and then type the week, date, type of day together constitute similar factors, fuzzy coefficient feature mapping table through fuzzy rules, not only to achieve quantitative impact factors and facilitate real-time to add a new rule. On this basis, the use of fuzzy clustering method for classification, based on the level of clustering similar day is selected to reduce the number of samples to accelerate the selected speed. The model takes into account the full impact of weather and other factors on load forecasting, further weakening the load of randomness. Simulation results show that the method has higher prediction accuracy.

A particle swarm algorithm (PSO) based on boundary buffering-natural evolution was proposed for solving constrained optimization problems. By buffering the particles that cross boundaries, the diversity of populations was intensified; to accelerate the convergence speed and avoid local optimum of PSO, natural evolution was introduced. In other words, particle hybridization and mutation strategies were applied; and by combining the modified feasible rules, the constrained optimization problems were solved. The simulation results proved that the method was effective in solving this kind of problems.

In optometry, simplified models are usually used to analyze refractive property of optometry system on the assumption that lenses are thin and close enough to each other. However, in fact those lenses do have stated center thickness and lens space between them. The simplified models are not suitable for accurate analysis and system design. In this paper, first, accurate mathematic model for refractive property of single spherical and cylindrical lens is established. Next, accurate model is established for complex optometry system with different kinds of lenses combination. Then, influence factors such as lens structural parameter, lens space and lens position are analyzed for refractive property. Results show that correct lens position is very important for complex optometry system. Parallel light should pass lower power lens first and then higher power lens. When lens power and lens space gets bigger the influence of lens space will be more significant on refractive property. For uncertainty component, uncertainty from front and back surface radii are the biggest, secondary is the refractive index and lens space, and uncertainty from lens thickness is the least.

In order to improve the authenticity of human-computer interaction in the virtual scene, the data glove is used. Aimed at this sensor input device for the characteristic of multiple-joints, the collection and calibration method of original data are discussed. By analyzing the movement characteristics of human hand, mapping from human hand to virtual hand is accomplished. By embedding OSG in MFC, with the intersect vector method and map projection method, invoking the 3D ship engine room and interactive effect of people roaming in the scene are reached. And at last, by using the data glove, the interventional manipulation of virtual objects in the virtual scene is implemented.

Finite element analysis could be used as a supplementary means to investigate mechanical behavior. ABAQUS software is conducted to analyze steel reinforced concrete (SRC) columns. Firstly, in order to validate the rationality of the analytical model, finite element models of test specimens are established to simulate the test process. By comparing the analytical results with experimental ones, it is found that the results from finite element analysis coincide well with that from test. So ABAQUS software could be used as a supplementary means to simulate SRC column mechanical behavior . Further the ductility and ultimate capacity of SRC columns are studied with the changes of steel bone ratio and the axial compressive ratio.

Pinch valve is an important flow adjusting device in the operating system of polymer materials with characteristics of high viscosity and high solid content, and its service life limits its application and popularization. In this study, for the special application environment and requirements of clevis pinch valve in the operating system, the dual-parameter Mooney-Rivlin constitutive model of rubber and Linear Elastic model of clevis were used. The stress and strain distributions of the rubber hose, while completely closed, were obtained by means of FEM (Finite Element Method) analysis. Parameters of hose thickness and cone length of the rubber hose were optimized, and the structure-improved pinch valve was obtained as well. The strain energy release rate and fatigue life were analyzed for the improved rubber hose at the most dangerous cell.

A series of air knife flow rate were conducted by a hot dipping process simulator in laboratory to study its effect on coating weight and thickness. The research results show that, when the experimental steel were immersed for 3.5s in a Zn-0.24%Al zinc bath, with atmosphere of N2-10%H2 and dew point-60°C in the whole simulation, air knife flow rate (FR) was a key factor for coating surface quality. When FR was precisely controlled by the simulator from 200~500 l/min, the coating weight and thickness decreased significantly from 159.68 to 56.19 g/m2 and 17.45 to 7.84 μm. In which the decreasing line was more obvious when FR increased from 300 to 400 l/min, that the coating thickness had a dramatic decreasing from 18.08 to 11.07μm.

Nonlinear numerical analysis for prefabricated shell wall structure is processed on this paper with the finite element software of ABAQUS. Nonlinear numerical analysis for prefabricated shell wall with vertical joint is processed firstly and numerical analysis results are found to be reasonable when compared with experimental results. Then the influence of factors such as shear strength of joint and axial compression ratio are conparatively analyzed. The results show that shear strength of joint has a greater influence on the bearing capacity and hysteretic performance of the structure and axial compression ratio also has a greater influence on the bearing capacity but less on the hysteretic performance.

The active and reactive power decoupling control of photovoltaic system is analyzed in this paper. The DC-DC and DC-AC two level photovoltaic inverter model are built on the RTDS. A new type LVRT control strategy about photovoltaic system is proposed. In the symmetrical grid drop fault case, photovoltaic system output reactive power to support the grid voltage recovering and save reactive power equipment. The feasibility and effectiveness of the control strategy is verified by simulation and experiment on the RTDS.

A method for online identifying and processing single variable outliers was proposed based on a three-sliding window-Bayesian method. Generally, the method utilized the characteristic that the flow rate and temperature in metallurgical production do not change suddenly. Based on this characteristic, the research accurately identified outliers and variation of normal working points by analyzing the change of Bayesian posterior probability and conditional probability of the detection data in the three sliding windows.

Wenzel-Kramers-Brillouin (WKB) method being an approximation method in quantum mechanics has been applied widely. For the potential problems WKB approximation method is taken as an effective technology. With the help of the WKB approximation method the quantum conditions of bound States particle being in three different typical one dimension (1D) potential well models are derived in this paper. In addition, the idea of the WKB approximation method and the procedures dealing with the potential problems are demonstrated clearly, which are very helpful for understanding the quantum conditions of 1D potential well models deeply and mastering the WKB approximation method to solve some related problems in quantum mechanics.

Puts forward a kind of new harmonic study bases on photovoltaic merged into the distribution network through real-time simulation method: Build a model and control model in RTDS real time simulation system, by adding LCL filter, optimizing of filter parameters, analyzing harmonics of the data. At last analyzes the experimental results by using harmonic analysis module in MATLAB.

This paper investigated the anti-penetration performance of different sandwich structures plate using numerical simulation method. Finite elements models of the bullet and sandwich plate were established. The penetration performance of sandwich plate by bullet was simulated by software of LS-DYNA and dynamic response of the bullet during the penetration process was got. The results show that the anti-penetration performance is different because of the different cores in the plate. Besides, the density of the aluminum foam core has a direct effect on the performance. This paper could provide some reference for the designing of sandwich structures.

In order to study “three zones” of goaf spontaneous combustion with U+L ventilation mode working face. Numerical simulation is used to simulate the distribution law of “three zones” of goaf spontaneous combustion in case of different distance between crossheading and working face, and different air quantity. Research suggests that the “three-zones” of spontaneous combustion has great influence with different distances and different supplied air volume.

Services composing have played an important role in the industry and academia in recent years. Based on the relevant theory and experience of the shortest path problem in a DAG, we propose the method of dijkstra algorithm implementing services composing way selection. Then we provide the pseudo code description of the algorithm implementing the optimal path selecting process and test the correctness of algorithm through the contrast experiment to offer a feasible solution for services composing way selection.

Zinc oxalate dihydrate as the precursor of anometer zinc oxide (nano-ZnO) was prepared by direct precipitation method. The zinc oxalate dihydrate was dispersed in a silver nitrate solution, and then the resulting solution was filtered and dried under 120°C. The silver doping nano-Zinc oxide (nano-SDZO) was obtained by decrepitating the zinc oxalate dihydrate cake under 500°C. The microstructure of nano-ZnO and nano-SDZO were characterized by TEM, and the chemical reaction in the heat burst process was described. The nano-ZnO particles were 50-60 nm in diameter, and the particle size of nano-SDZO in the range of 20-100 nm. Antibacterial activity of the nano-ZnO and nano-SDZO were compared. The results show that all of the ZnO samples inhibited the growth of S. aureus and E. coli, and nano-SDZO showed a relatively higher inhibition rate than other samples. Two possible mechanisms were proposed to explain the inhibition of bacteria.

According to the relevant evaluation indexes in Zhejiang Province, this numerical research uses the PHOENICS software to analyze and evaluate the indoor wind environment of a public building, which declare the identification of green architecture design .The research was written in the form of a report, hoping to provide a reference for the peer.

No sand cushion vacuum preloading method is one of the construction technology for treating the ultra soft soil formed with hydraulic fill at present. The practice is ahead of the scientific research work, as the effect detection technology of the surface-layer improvement is still in the stage of exploration. In this paper, the cone penetration test (CPT) is used to detect the effect of the surface-layer improvement of the ultra soft soil based on one case in Zhejiang province in China. The result shows that the cone tip resistance is at the range of 0.08 ~ 0.40MPa and the thickness varies about 1.5 to 2.2 m of the treated ultra soft soil. The cone tip resistance along the depth has two kinds of curve shape and four zones.

Due to the demand of the architectural features and production processes, so that the structure can’t be constructed according to specification requirements to set corresponding expansion joints. This leads to the structure to form a super-long concrete structure. Such structures have large force and deformation under the action of temperature, and even cause cracking of the structure, which seriously impacts on the safe and proper use of structure. Further, if the structure is longer than the specification maximum spacing of joints, just relying on the qualitative construction measures to deal with the impact of the temperature effect on the structure can’t meet the requirements of structural design. Meanwhile, now the quantitative calculation of temperature effect isn’t unified at home and abroad，the adverse effect of the structural temperature effect is an urgent problem. In this paper, regarded the actual electrolytic aluminum plant long concrete structure as the research object, and used finite element analysis program to study the quantitative analysis to explore the laws of temperature stress and deformation size of the long concrete structure. It provides a reference for the construction and seamless design of future similar structure.

Oxidized alkaline loofah sponge (OAL) was given by treating alkaline loofah sponge (AL) with H2O2, four classic adsorption kinetics models which were Lagergren’s pseudo-first-order, Pseudo-second-order equation, the Elovich equation and Intraparticle diffusion were applied to study how the different oxidation degrees of loofah sponge impacted on the values of fitting goodness of the above models and to determine which kind of model was the best fit of the adsorption process and adsorption mechanism. The results showed that Pseudo-second-order equation’s fitting degree was proposed to be best and adsorption mechanism was chemical adsorption by ionic bonding, at the same time, as hydrogen bonds increased, water molecules formed a barrier to impede MB diffusing into the micro-structure.

In a Mobile Ad-Hoc Network (MANET), the optimal placement and movement of relay UAVs and the performance of the relay network are all closely related to the propagation and coverage area of the relay signals. In this paper, on the basis of the geometric model of the relay link and relay signal coverage area, synthetically considering the impact of the propagation path loss, the multipath fading and the shadow fading, we study the coverage area of the relay signals by applying a statistical model based on the coverage of outage probability. The simulation results show that the channel fading has big effects on the radius of coverage area, and the radius of coverage area will increase rapidly with the increase of the outage probability. The results provides valuable recommendations for the placement, the movement strategy and network performance evaluation in the MANET.

Through a highway asphalt pavement condition survey and analysis of the main causes of disease, through material selection and grading design, the design of the treatment structure, class structure using the drainage layer, exclude the internal structure of the water surface; focused on solving the asphalt pavement water damage issues, effectively extending the life of the highway.

The regional settlement has close relationship with the environment of specific terrain, and formed integrated and vivid human settlement landscape system through human’s social living and practice. Taking the analysis view of studying space structure of landscape form, this paper is trying to find out a new study clue for traditional settlement configuration in specific region – the element of landscape space structure - the meta structure as the object, and aim to provide a practical theory and method for regional traditional settlement study.

Healthcare scenarios are human-machine systems which involve diverse linked products. Based on analysis of key elements of healthcare scenario under overall digitalization, the paper proposes a new definition of modern healthcare scenario from a system perspective and summarizes three dimensions of interactive relations in modern healthcare scenarios. According to data from field interview and case study, the paper thoroughly discusses forms and implementations of the interactive relations in healthcare scenarios from three aspects, i.e. information interaction, human-machine interaction and space interaction. We think the in-depth study of interactive relations in modern healthcare scenario can aid in the requirement elicitation process of medical product design and intra-hospital communication technology development.

In consideration of the importance of the prosthetic finger having the motion law of human finger. We first establish the relationship between spring stiffness and joint angles of the prosthetic finger through the analysis of the prosthetic finger kinematic. Then collect the joint angles of human index finger during natural bending by using the CyberGloveII-22 data glove. Based on this, an anthropomorphic optimization method is proposed in order to let the prosthetic dinger have the motion law of human index finger. The method in this paper can also be used to plan the trajectory of the finger.

The two-point non-uniformity correction based on Least mean square (LMS) algorithm which was proposed by Suxia Xing need one FPGA processor, one DSP processor and four SRAM chips. This will increase the cost and volume of the whole infrared system. In the LMS algorithm, this paper improves the estimation of the ideal signal, so that it can reduce the influence of blind elements and improve the effect of non-uniformity correction. Besides, this paper realizes the two-point non-uniformity correction based on LMS algorithm with only one FPGA processor and two SRAM chips in the final, this will reduce the volume, weight, cost of the whole infrared system. Comparing with the two-point non-uniformity correction based on one FPGA processor, this paper did not need blackbody with uniform radiation in system. Above all, the method of this paper is useful and practical.

According to the fact that the nonlinear magnetic control welding signal is not smooth, this paper proposes a signal extraction and an analytical method of the system based on Hilbert-Huang transform magnetic control arc seam tracking sensor. First, the magnetic control to track the signal motivated by cycle is decomposed into several intrinsic mode functions from high frequency to low frequency component by using the empirical mode decomposition. On the basis of the Hilbert marginal spectrum of each component, distribution of time-frequency transform to each component can effectively restrain cross terms and extract the real-time signal dynamic law reflecting magnetic control seam tracking. This method used in a certain experimental platform for magnetic control arc welding seam tracking sensor platform signal analysis, has produced a good effect and extracted the seam tracking signal, which can offer more valuable information and help to further reveal the frequency and spectrum characteristics of various interference sources in the weld automatic tracking system. Furthermore, It also provides a theoretical basis for establishing the welding signals with excitation source as well as a new nonlinear model.

Recently the fast-growing business of the Internet are Online Social networking services, Online Social networking sites also become the most popular sites. In order to establish future social network which is optimized, and to eventually exploit the user base for commercial purposes, in-depth understanding the social characteristic of these networks is important. In this paper, we present a large-scale measurement study and analysis on the social structure of YouKu. Our results validate the power-law, small-world and clustering coefficient properties, present the correlation and difference among four centrality properties. Finally we discuss the utilization of these structural properties for the commercial purposes.