Search

As the rapid development of network, the requirement of network measurement becomes various and the results of network measurement are applied in many fields including anomaly detection, accounting, network management etc. But the measurement resources are limit and the measurement tools or algorithms are not flexible. So how to support the diversity of network measurement requirements must be studied. With reference to the SDM, this paper proposes a novel hierarchical measurement structure including three layers and provides the network measurement reconfiguration model (NMRM).The NMRM decouples the measurement requirement from the measurement resources and supplies an ability of reconfiguration of network measurement by composing the measurement resources according to some measurement requirement dynamically. The NMRM can support flexible, dynamic and concurrent measurement in the network.

This paper analyzed the corrosion environment of Missan oilfields and investigated the oilfield country tubular goods used in other similar oilfields. Summarized the effect of partial pressure ratio of H2S/CO2 and Cl-to the corrosion behavior of OCTG. This paper concluded the service condition, test results and anti-corrosion mechanism of carbon steel, low-chrome steel, modified martensitic stainless steel and nickel alloy. Finally arrived at conclusion that the nickel alloy can meet the requirement of Missan oilfields, some literature reported that the modified martensitic stainless steel can apply in H2S/CO2 environment. In the condition that be easy to replace the tubular, carbon steel and low-chrome steel tubular can meet the requirement with corrosion inhibitor.

An adaptive fuzzy proportional-integral-derivative (PID) force control strategy for a prosthetic hand is presented. The classical PID controller is also applied on the prosthetic hand as comparison. The parameters of PID controller are firstly tuned by Cut and Try method. Then a fuzzy logic system is used to adjust those parameters on line. Real-time force control experiments are realized on LabVIEW and PXI (PCI eXtensions for Instrumentation) real-time (RT) platforms. A rigid object and a compliant object are grasped by the prosthesis respectively to test the performance of controllers. Experimental results indicate that the adaptive fuzzy PID force controller is more effective than PID controller.

In order to improve the performance of muti-digital rights protection, a multiple watermarking algorithm based on Discrete Cosine Transform (DCT) and spread-spectrum technique is proposed. First, the host image is divided into subblock and each block is manipulated by DCT. Second, two watermarks are encrypted by Arnold scrambling. Third, the watermarks are modulated by by utilizing two kinds of strategies, and then are embedded in middle frequency coefficients of DCT domain. Experimental results show that the proposed algorithm is efficient to resist traditional signal processing attacks and has better security and robustness, higher capacity.

The capability-oriented requirements elicitation is an emerging research topic of requirements engineering, especially for complex system such as the C4ISR system. One of the problems is that the capability requirements are usually articulated in natural languages and need to be formally specified to support enterprise architecture analysis. The paper proposes a framework for modeling the domain requirements of C4ISR capabilities and suggests an extended UML modeling technique. As the modeling framework accords with the standard DoD Architecture Framework, the proposed method may populate C4ISR architectural analysis.

In order to enhance the accuracy of gait recognition, a new gait feature extraction algorithm is proposed. Firstly, the gait images are preprocessed to extract moving objects, including background modeling, moving object extracting and morphological processing. Secondly, an equidistant slicing curve model based on system of polar coordinate is designed to slice the moving object, and the slicing vector is used to describe the spatial feature; Thirdly, the slicing vector is converted into frequency signal by Fourier transform to extract the frequency feature. Finally, the above two features are fused and used for the classification. The experimental results show that proposed algorithm provides higher correct classification rate than the algorithms using single feature, and meets the requirements of the real-time.

We established a calculation model for retaining structures with double-row piles by using the midas GTS finite-element software, considering the interaction between pile and soil and adopting the contact element method, on the basis of a practical engineering application. We then determined a reasonable elastic modulus of reinforced soil bodies, thereby enabling the study of the influences of the reinforcement depth and width in the interpile soil on the internal force and displacement of the retaining structure with double-row piles. We present suggestions for reinforcement depth and width. The study results provide valuable reference for engineering design, construction, and cost control.

Hydroforming is one of the forming technique which paves the way for the easy production of light weight and high strength automotive and aerospace components. The different approaches presented by the various authors in the field of hydroforming and its applications are reviewed in this paper. The authors have used Finite Element Analysis using different simulation tools like Abaqus, Ansys, LS-Dyna and Autoform 3D that help to minimize the failure cost of materials and dies. This paper deals with those disparate approaches, discussing exhaustively the process and application of hydroforming, providing sufficient data to make readers identify the burgeoning areas of research.

This paper presents an attempt to develop an approach to predict the optimal process parameters for the Hole punching process on sheet metal. The Taguchi method is used to define the experimental procedure by its orthogonal array. The multiple responses of the Hole punching process, hole diameter and hole offset are optimised by the Grey Relational Analysis procedure. The statistical analysis of variance reveals the significant parameters which affect the process by analyzing the input parameters with the grey relational grade. The Non linear model obtained by this analysis is further processed by a Meta heuristic algorithm to obtain the optimality.

This paper presents a novel method to reduce the inrush currents produced by interconnecting induction generators. The method is based on the sequential energization of the contactors and a grounding resistor connected at the neutral point of a wye-connected stator. Analytical developments are presented, which permit to determine the optimum value of the neutral resistor directly. Theoretical and simulation analysis show that the proposed method can be almost as effective as the traditional three series resistor method. The proposed method requires only one resistor and one bypass contactor and is therefore more cost-effective than the traditional methods.

With the purpose to stimulate the technical development and to seek the new growth points in economy, governments of different countries attach great importance to the technical programming of the new generation, giving priority to the internet of things. It is also stated in the twelfth five-year-plan outline for national economic and social development of the People's Republic of China that the national infrastructure should develop with the safety of broadband blending to push the application of the internet of things.