Search

This research presents an experimental study related to the shear behavior of simply supported reinforced concrete beams reinforced with Glass Fiber Reinforced Polymer (GFRP) bars. Four concrete beams reinforced with GFRP bars and four control concrete beams reinforced with steel bars were tested until failure. In order to realize the occurrence of shear failure, all tested beams were designed with longitudinal reinforcement only and without shear reinforcement. The test variables used in this study were the concrete strength, f'c, and longitudinal reinforcement ratio, ρ. The crack patterns, location of the diagonal crack and angle of the diagonal crack were also observed during the test. The shear design equations obtained from the codes and references were used to evaluate the data obtained from the test. Finally, based on the data obtained from experimental and theoretical analysis, comments and recommendation on the shear strength equations were suggested.

To investigate the influence of shear span ratio for the shear behavior of reinforced concrete beam with HRBF500 high strength rebars as stirrups, an experiment was carried out, which included 8 simply supported beams with HRBF500 rebars as stirrups. Under concentrated loads, the crack, deflection, strain of rebars, bearing capacity and failure mode are observed under different shear span ratios. Some comparisons are made between test results and calculated outcome. It shows that the shear span ratio has very important influent on the shear behavior of reinforced concrete beam with HRBF500 high strength bars as stirrups. Formula in code for design of concrete structures can be used to calculate its shear capacity with enough safety.

According to tests of 8 T concrete beams with HRB500 steel bars as stirrup, the shear behavior of beams was researched under uniform load, and the influencing factors of diagonal crack width were analyzed, such as the different concrete strength, stirrup spacing and the welded wire fabric. Experimental results show that concrete beams with HRB500 steel bars as stirrup show similar behavior to the beams with conventional stirrup, and the stirrups yield can be achieved which meets the requirement of shear behavior in structure. In addition, the welded wire fabric can be used as one of the new kinds of reinforcement to control diagonal crack width.