Search

The contribution deals with the possibilities of the use of existing commercially available vectorization programs for recognition drawing entities in raster graphics format obtained by scanning of the engineering drawing. Drawing entities as a line (solid, dashed, dot-dashed etc.), dimension, hatch, various symbols, text, etc., have specific semantic for the designer defined by standards. Expert knows to interpret this graphic language and he knows to create a mental model of the real object. To be able interpret digital content of the engineering drawing obtained by scanning by the form of 3D computer model often requires to perform many intelligent operations. In the first step it is necessary to obtain such vector representation of the scanned drawing to be able to identify the original drawing entities. Suitability of using the contemporary commercial vectorizing programs for engineering drawings was verified on the test sample of the drawing entities and the results are published in the paper.

Most of the scientific research engines utilize the same way to rank scientific research papers (SRP), this way is highly depend on the citation network. The retrieved results of these engines for any keyword contain old papers with the highest citation value. In this paper, we proposed a new and easy to implement ranking algorithm for scientific research papers known as Paper Time Ranking Algorithm (PTRA). PTRA is a new ranking algorithm that depends on three factors to rank its results; paper age, citation index and publication venue. To construct and prove our ranking algorithm we created a web crawler that crawl different scientific search papers databases in the world to collect the information that PTRA needs. Unfortunately, some of this information was missing, such as, the impact factor of the journals. To collect this information, we created another crawler that search the Internet for these journals impact factors. However, to prove our ranking algorithm results, we have compared PTRA with Google scholar ranking algorithm. We used Google scholar, since it has more than 50 million papers and its own system can gather and collect papers in a faster way. Our comparison results show that, citation index has the highest impact on Google scholars ranking algorithm results. Unlike PTRA that gains the paper age a higher impact on the ranked results. However, PTRA depends on the citation index and publication venue to rank the results but with less impact than the paper age.

Recently, with rapid development of computer/network technology and algorithms for composing test paper, cyber-based online examination system is a practically valuable hot research concern. In the paper, the mathematical model is created for solving problems with the online test paper composition system. Through comparative analysis of merits and shortcomings of various coding schemes, and to overcome the shortcoming that traditional genetic algorithms easily fall into premature convergence, it utilizes the adaptive adjustment method of dynamic parameters and elitist strategy to improve to develop the online test paper forming scheme based on adaptive genetic algorithm. For the selection of each parameter, simulation test is conducted to obtain the solution approximate to the best one.

Nowadays, the computer is increasingly popular, and college examination is developing in the direction of traditional examination means to automation and intelligence ones gradually, all these make it inevitable to construct question bank for courses, and to generate test paper using computers. This paper uses the Delphi technique, to make improvements to existing components, combining with VBA programming, and use of SQL Server to implement the question bank management and test paper auto-generation system, which could generate test paper in Word Document. A large number of tests show that the software is running stably and system features are functioning correctly on Windows 2000/XP/2003 platform with Office XP/2003 environment.

IIndoor photo has been widely used in products of shopping malls publicity, light box advertising, wedding photography, posters, engineering and landscape effect picture, digital photo album, art photo, antiquing canvas and window advertising. PP synthetic paper which was the most common indoor photo materials was selected as the research object, and it was printed by the photo printing machine. A series of experiments were carried out according to its printability. The main parameters of PP synthetic paper such as solid density, dot gain and relative contrast were tested, which provided a theoretical and practical basis for digitization of indoor photo.

The detection of elements in top part of research paper is very important, because these elements are often used as the search items by user. This paper provides a mixed method for auto detection of top part from research paper. The papers feature of keyword, layout and content similarity are mixed to accurately find the area of top part and recognize the elements in top part. Experiments show the advantage of our method over existing methods, and future work is also described in the paper.

According to the problem that the flexibility and efficiency are not high of the current test paper generating system, applying data mining to figure out the inter and intra connection among all the knowledge points of CET-4, mining association rules, and picking out as more potential weaknesses of knowledge points as it can, then selecting items corresponding to the weaknesses and generating a user-level specific suitable test paper. Experiments show that the new test paper generating algorithm (TPGA) based on association rules response intelligently and quickly to different user levels, and provide an essential improvement in test paper generating process for users own good to enhance their exercise results.

Paper tension is the most important control parameter in roll material production that directly impacts the printing quality of the web offset. Based on the closed-loop paper tension control theory, by conducting a research into the simulation of paper tension control system with MATLAB/SIMULINK, presented the closed-loop control diagram about the paper tension control system. Under different control parameter, the value of the overshoot, respond speed and residual of the system varies. As a result, the quantitative research on the simulation of the system offers a valid means in improving the control accuracy.

As a important part of teaching, Traditional paper analysis algorithm is complicated and not comprehensive enough. This paper according to the indicators of education measurement and improves the traditional calculation models, the system assesses the perfect calculation model, The teacher also can get the true and fast reaction to students' knowledge and the quality of the paper. This method thereby provides a convincing basis for the improvement on the future teaching and increase the effectiveness in teaching

This paper analyzes the bag-making process and control requirements of paper and yarn compounding bag-making machine (PYCBMM). The overall control scheme is established. Configuration software WinCC Flexible 2008, Siemens touch panel MP377, Siemens PLC S7-200, Siemens frequency converter MM440, rotary encoder, color sensor, and other elements are synthetically applied to design the PYCBMM control system. During 12 months commissioning operation, the control system is stable, reliable, and easy to operate. All the technical indices outperform the design requirements.

This document explains and demonstrates how to prepare your camera-ready manuscript for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. The text area for your manuscript must be 17 cm wide and 25 cm high (6.7 and 9.8 inches, resp.). Do not place any text outside this area. Use good quality, white paper of approximately 21 x 29 cm or 8 x 11 inches (please do not change the document setting from A4 to letter). Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

The three-dimensional roaming system of landscape design and development in this paper based on the analysis of virtual reality technology and landscape characteristics. the system is to achieve a multi-view, multi-scenes tour. Further proposed of virtools technology significance in the garden is put forward and specific applications of virtual reality technology in landscape design are put forward.

With the rapid development of China's socialist economy, and information technology updating very quickly, while the masses begin to concern the sports, then their demanding for sports information is also increasing. Therefore, this paper based on the micro-blog effecting on the sports information dissemination as a starting point to think about the role of micro-blog on sports information, and offer some practical reference for China's sports information workers.

Most of the product design on the market is variant design or adaptive design, which need to reuse existing product design knowledge. A key aspect of reusing existing CAD model is correctly define and understand the design intents behind of existing CAD model, and this paper introduces a CAD model annotation system based on design intent. Design intents contained all design information of entire life cycle from modeling, analysis to manufacturing are marked onto the CAD model using PMI module in UG to improve the readability of the CAD model. Second, given the problems such as management difficulties, no filter and retrieval functions, this paper proposes an annotation manager system based on UG redevelopment by filtration, retrieval, grouping and other functions to reduce clutter on the 3D annotations and be convenient for users to view needed all kinds of annotations. Finally, design information is represented both internally within the 3D model and externally on a XML file.

Hinterland of a port is an economic support area of a port. Basically the economy of a hinterland comes from industries in it. The need of goods creates the distribution of goods. Port users in East Java consider using nearest port from his company. This paper is intended to know hinterland area every port in East Java. This paper used set covering model to know hinterland area of each port. The objective function of this model is Minimize total inland transportation cost. The factors that are considered are the service of the ports, distance, mode of transport, and transportation time. The result of this paper shows the Hinterland area of Tanjung Perak port which used General cargo packaging is Surabaya, Container commodities are Bojonegoro, Gresik, Kediri, Lumajang, Mojokerto, Pasuruan, Probolinggo, Sidoarjo and Malanng, Dry Bulk commodities are Gresik, Kediri, Mojokerto, Sidoarjo, Tuban. Probolinggo port has hinterland are General cargo commodities are Madiun and Probolinggo. And Hinterland of Tanjung Wangi port which used container packaging areBondowoso and Banyuwangi.

An increasing number of companies establish energy management systems for continuous improvement in their energy efficiency and for this intensify monitoring their current energy consumption. These data can be used to gain further information about the production and to find potentials to increase its energy efficiency. In the procurement process of machinery and equipment or in the planning phase of production systems and building services, information about energy demand is rarely available, though it would be valuable for an early inclusion of energy efficiency in these processes. Therefore this paper discusses different forecast methods for energy consumption of machinery and evaluates in particular their universal applicability, effort and accuracy by analyzing them through the example of a packaging machine. In addition this paper proposes a further usage of energy-related data of machinery, which can be automatically acquired by monitoring systems for prognosticating their energy consumption as well as a possible distribution approach of this information. Therefore an own forecast method is presented, which shall process the energy-related data combined with information about dominant parameters of the product, the usage of the machine and the environmental conditions. For the distribution concept it was taken into account that the generated and shared information has to be abstracted in a way that no critical secrets of the company are revealed.

The analysis and implementation of this paper is applied to a real game boxing machine. The contents of this game boxing machine are consists of three parts that are the UNITY, programming and hardware development. Therefore, in order to have RPG role-play boxing game inside of real game boxing machine, this paper firstly analyzes user requirement and then implement the combined-use in the traditional large boxing machines that will let the players to face the need considering how to fight the contents of RPG role-play boxing game. Moreover, in order to save more time to make 3D animations, motion capture equipment is used called MOCAP to generate characteristics, hero, monsters, and beautiful girls. All body movements of characteristics inside of game boxing machine captured by MOCAP are tied to the body of the head, limbs and torso. Furthermore, those body movements will PhaseSpace to our servers via the Internet passing out after the signal processing MotionBuilder software for recording and output operation. The output file can be transformed into the skeleton and action graphic model and using MAYA software can also do the same way. All procedures in this RPG role-play boxing game design have been successfully interacted both machine side and play side with fun and game new life, and to integrate the actual situation of the game for the future.

The present paper describes the activities carried out at Chieti-Pescara University after the 2009 L'Aquila Earthquake. The activities are multidisciplinary and have involved both engineers (structural and industrial) and architects (urban planner and specialist in historical buildings). The goal was to obtain a comprehensive approach to old towns reconstruction. This activity is particularly important to minimize the earthquake consequences.Two peculiar aspects of the work are selected among other ones and presented within this paper. The first one is: how reliable are speedy in-situ surveys, in order to evaluate post-earthquake damages and building occupancy? Considering that both people safety and reconstruction funding depend on this judgment, it is important to check the procedure reliability. The second aspect is the analysis of an old urban center, viewed as a system of fragile components. System components are both material (e.g. a particular building) and immaterial (e.g. availability of the road system), and have been selected to maximize inhabitants safety, above all in terms of first aid to injured people and in terms of efficiency of strategic structures and infrastructures. These considerations are being slowly introduced in the Seismic Italian Code.

The basic notion underlying urban underground development is that underground space is a non-renewable resource, therefore planning its use must be done in a sustainable, environmentally-responsible manner with due account taken of economic, functional, social, and legal aspects. This paper addresses issues related to the planning, siting, design, construction, operation and maintenance of underground structures in the city of Moscow. The mechanism of the interaction between an underground structure and the surrounding rock masses is described. It is shown that underground engineering can be significantly enhanced through the use of expert systems. The paper also discusses the need for changes to the legal framework for the use of urban underground space.

The paper deals with selected approaches which unite several correlation analysis principles. Field data very often has various forms and contents. The comparison of different approaches will help to determine more precisely which correlation analysis is better for assessing input and output data. In this paper we introduce several correlation principles which can help to select the most suitable correlation approach. We present a traditional correlation analysis and compare it with Pearson and Spearman correlation coefficients. The value of our article lies in comparing several different approaches of the correlation analysis in which the oil field data from diesel combustion engine are used

Creation of the intelligent system for highly structured domain is possible with determining the whole system of concepts included in the ontology of this area. Presentation by means of formal ontology model provides a uniquely interpreted terms. Based on the model of ontology the intelligent system will integrate their knowledge and information components of all sections of the data area. The paper considers the unification of nanomaterials subdomain with other subdomains that are need to be used for intelligent system for nanotechnology. The paper also proposes mathematical ontology model of one of the component - that is ontology model of foams and emulsions class.

This paper presents the design and construction of a haptic device. This device aims to generate a tactile feedback to the user. The feedback is generated when the user has contact with virtual limits (through a graphical interfaces or electronic cards). These limits could be due to speeding or recklessness from the pilot under conditions of low visibility or turbulence. The paper begin with the design of the lever-shaped cam which has two Degree of Freedom (DOF). It proceeds with the kinematic analysis to obtain the work area. As of workspace is possible to determine the contact point with the geometry of the virtual object. In this event the user will have a tactile feedback, a force or vibration. This force must be minimal, to prevent injury to the user.

Nowadays the world of manufacturing and production has been encountered with a constantly changing behavior’s of customers. Moreover in the global market, a company can survive if it has the efficient capabilities for rapid product development.These capabilities are known to be important and they mainly affect on the market penetration and cost reduction. One way to enhance such capabilities is to integrate the essential activities of a manufacturing with the help of information technology. In recent years, the researchers have proposed integration of the computer-aided design (CAD), computer-aided manufacture (CAM) and computer-aided process planning (CAPP) as the main phases of product development lifecycle. These phases play an important role in the manufacturing environment and their integration will result in high-class production with minimum lead time. This paper focuses on the die design and process planning activities to produce the molds seamlessly . It studies the recent works on integration solutions and proposes an integration framework for glass bottle manufacturing companies.The paper considers the integration of the part design, macro process planning and the mold design activities. Moreover, the solution has used the ISO 10303 (STEP standard-International Standard for the Exchange of Product data). The novel aspects of the framework have been discussed through a case study. The case study highlights the integration of glass bottle design, process planning and bottle mold design to show the capabilities of the proposed framework.

The paper presents a method developed and used by the CCHAPT researchers for the graphic plotting of the index tests results for hydraulic turbines, the comparison of the efficiency curves resulted from testing to those obtained by the model transposition [1] i.e. the determination and comparison of the existing combinatory cam with that obtained from tests.The method presented in the paper was born from the need for processing and presenting the results of index tests within the shortest delay and eliminating the errors that might occur in the results plotting.

The paper deals with quadrocopter stability in vertical axis. At first, dynamic model of quadrocopter is introduced. In the paper are derived relations for control error in steady state for PD and PID controller. Based on dynamic model the PID controller is designed by optimizing method. Using designed controller the quadrocopter stability in vertical axis was simulated in software Matlab. In the conclusion the results of the simulation are shown.

The paper deals with stepper motor control using microcontroller ATmega8-16PU. In the paper are mentioned two ways of control, namely full-step mode and half-step mode control. At first, bipolar stepper motor is introduced. Next, there is created measuring stand consisting of bipolar stepper motor with one step angle 1.8° and encoder with 360 CPR. During the experiment were measured angular velocities by I/O measuring card MF624 cooperating with Matlab/Simulink. The results show differences between used two stepping modes of motor.

The paper deals with a description of the creation of CAD model (file format .IGES) based on polygon mesh (file format .STL) obtained by 3D scanning. On the basis of the imported polygon mesh into Reverse Engineering software, it is possible to create surface (or solid) CAD model. For CAD model created from a polygon mesh, a model of screw propeller was chosen. The paper also presents a color deviation map acquired by comparison between a polygon mesh and a CAD model. The 3D digitizing was performed by 3D scanner GOM ATOS II SO TripleScan; GOM ATOS Professional v7.5 SR2 software was used for processing of the scanned data and Delcam PowerSHAPE 2015 CAD software was used for reverse modeling.

This paper presents a case study both for individual process improvements and also for the improvement of the overall manufacturing flow, within an SME, using specialized simulation software called SigmaFlow Modeler. The improvements are done based on simulation results (accurate knowledge), meaning that by analyzing the process distribution charts, one can dispose measures for solving problems or even preventing potential failures. It has to be noted that by eliminating those bottlenecks the overall performance of the process will increase and the manufacturing flow will also be enhanced. The paper will also present an actual process simulation for the most complex process from the manufacturing cycle, i.e. the milling process, and a short analysis, focusing on possible improvements, will be performed on it. Moreover, further improvements will be done by closely reviewing and identifying every input and output and by introducing them into a cause-and-effect matrix, the importance of each input can be mathematically calculated and action can be taken for the critical ones in order to improve the process.

This paper is aimed at developing the system assisting an orthotics specialist during correction process of orthoses structure. Orthotics is a specialty within medical field increasingly progressing in terms of variety of offered services, equipment and materials used. Further mentioned in this paper is the usage of optical scanning, depending on making series of photos in split second and then assembling then into 3D model, thus eliminating drawbacks of the classical methods based on the plaster cast preparation. The objective of such computer aided design is evaluation of the influence of prostheses shape modifications on their features.

This paper presents the design and analysis of new proposed topology micro-electro-mechanical system (MEMS) inductor. This new symmetric MEMS inductor is designed to reduce the total length of the conductor strip and hence reduce the resistance of the metal tracks. This results significant increases in the quality (Q) factor of the inductor. In this paper, the MEMS inductor is designed using CoventorWare®, which is powerful software for MEMS computer aided design (CAD), modeling and simulation. Results indicate that new symmetric inductor topology has thehighest Q-factor and it hasbeenimproved bytwo times compared to circular inductor. The analysis revealed that area of the symmetric inductor has reduced by37.5% compared to the circular inductor. Result has proved that the reduction of length of the conductor strip has reduced the resistance of the metal tracks and results in a high Q-factor inductor.

The effectiveness of egress paths from a building could be attributed to good signage or intuitive Architecture but we know it is also influenced by human behaviour in fire. The extent to which human behaviour plays a role in the effectiveness of egress routes is not yet fully understood.The aim of this paper is to investigate human behaviour in a relatively simple study of exit choice. The study is conducted in a virtual environment by examining the effectiveness of additional floor-based chevron arrows when compared with conventional exit signage on the same escape routes.Fifty nine participants were asked to interact with the software to escape from a fire in the created virtual environment. Thirty two of the participants used a model with conventional exit signs only. Twenty seven of the participants used the model with exit signs and chevrons on the floor. After completing the virtual egress exercise the participants were given a questionnaire to help understand their behaviour during the task. This allowed the authors to compare results of the post experiment questionnaire with the video output of the test.This research is novel in that involves the use of already existing technologies for new purposes; in this case, commercial computer games engines, generally used for entertainment purposes. As technology reaches new levels it is inevitable that there will be overlap in functionality.This paper describes the experiments, analyses the information gleaned from the research and provides some conclusions for consideration by others in this field. By assessing exit choice behaviour and evacuation time it is possible to compare the effectiveness of the additional floor based signage as a fire protection measure provided above and beyond normal code requirements.

In this paper, we present a new knowledge push technology for complex mechatronic products design based on ontology and variable precision rough set (VPRS). Ontology can explicitly represent knowledge semantics and let designers exchange knowledge about design and the product development process; while using the knowledge reduction method based on the VPRS method, the design knowledge repository is simplified and design rules also be distilled from the reduct design knowledge repository. On the basis of the above approach, multiple designers can efficiently share design knowledge and can obtain appropriate design knowledge during all design processes. Finally, a case is employed to validate the proposed method of this paper.

The following paper presents an IT tool for aiding assessment of a safety culture level in an organization in a form of an application, providing fast and easy way to analyze data obtained from questionnaires. Traditional data analysis often turns out to be time-consuming and labor-intensive. To make the process faster, more detailed and to find all the possible links among all the available data there is a need for an IT tool. The presented application has been developed with publicly available and completely free tools and technologies. It is a complete piece of software, fully flexible which can be modified or equipped with new functions (modules). The presented solution eliminates the time consuming process of “copying” data from paper questionnaires, and allows to get information about the safety culture level right after adding a questionnaire to a questionnaire database. The presented tool can function as a mobile questionnaire which can be used in any place with Internet access and to fill it in only a browser is required.

The paper is dedicated to analyze the modern expert systems to assess the technical condition of power stations and substations high-voltage equipment. The main problems of modern expert systems and their possible solutions are determined. As the structure and their basic construction principles are considered. Also this paper proposes an algorithm for the expert system model using fuzzy inference on the basis of technical diagnostics and tests. As a case study of assessment of power transformers state based on dissolved gas analysis in the oil is presented.

The inverted pendulum system is a challenging control problem in the control theory, which continually moves away from a stable state. The paper presents the design of a Proportional-Integral-Derivative (PID) controller for a single-input multi-output (SIMO) inverted pendulum system and using the Bees Algorithm (BA) to obtain optimal gains for PID controllers. The Bees Algorithm optimizes the gains so that the controller can move the cart to a desired position with the minimum amount of the change in the pendulum’s angle from the vertically upright position during the movement. The tuning aim is to minimize the control responses of the cart’s position and the pendulum’s angle in time domain. MATLAB/Simulink simulation has been performed to demonstrate that the effects on the system performance of PID controllers with optimal gains. The obtained results show that the tuning method by using the Bees Algorithm produced PID controllers successfully within the controller design criteria. Following a description of the inverted pendulum system and the Bees Algorithm, the paper gives the obtained simulation results for the system demonstrating the efficiency of the design.

This paper presents a new approach for designing the Power System Stabilizer. As in power system network, low frequency oscillation always occurs for a long period of time that will decrease the power transfer capability. Power System Stabilizer known as PSS is being installed as one of the control devices in a generating unit. The conventional PSS (CPSS) is the most commonly used in power system, which uses lead-lag compensation. The lack in CPSS has drawn an interest of designing the new approach of PSS to outperform the conventional one. Thus, Bees Algorithm (BA) which is known as one of the numerous intelligent optimization methods is proposed in this paper. It is appears to aid the system stability by optimizing the PSS parameters tuning. The PSS with the BA approach is labelled as BA-PSS and being tested on single machine infinite bus system (SMIB) in Matlab/Simulink environment. BA-PSS performance is compared with CPSS as to validate the ability of the proposed method to achieve great performance in power system stability enhancement. Different type of mechanical input is being injected into the system and the result shows that BA-PSS is capable to optimize the parameters tuning of PSS. BA-PSS also improved the unstable or poorly stable modes as the system achieve the stability with lower overshoot and less time settling. The superior response of BA-PSS controller proved the ability of BA approach in which is capable to solve the lack in CPSS with better performance in enhancing the system stability.

The function of the fan is to reduce heat in the radiator where hot cooling liquid is circulated. The radiator fan blades are made up of various materials nowadays and the legacy material used is steel. This paper presents the static analysis of the radiator fan and at the outcome we analyze the failure of the entire blade taking into design consideration. The analysis of the radiator fan is executed to different types of materials to check and evaluate the material and process conditions which withstand the dynamic and structural loads. In the paper design of the blade is done through reverse engineering. The static analysis is done using ANSYS where the 3D solid model of the radiator fan is considered for structural analysis. The various loads and properties and applied through the entire length of the radiator fan. The analysis leads us to proposal of suitable material to withstand all the loads. The Fiber Reinforced Plastic (FRP) material is tested and considered.

Power delivered to consumer from utilities is susceptible to power quality problems. The most common power quality problems are voltage sag. Modern equipment nowadays are prone to problems associated with voltage sag. Such problems can be apprehended by several mitigation methods. This paper will discuss voltage sag mitigation method by eliminating the injection transformer in ordinary Dynamic Voltage Restorer (DVR) and applying Single Phase Matrix Converter (SPMC) in a single phase DVR topologies. The objective of this paper is to investigate the potential mitigation method without the injection transformer in the DVR topology. DVR circuit will be constructed and simulated using MATLAB/SIMULINK software. It is hoped that the result of this work will provide a simpler mitigation technique where existing DVR topology can be constructed with less component that provides unnecessary losses in the DVR itself.IndexTerms—Injection Transformer, DVR, SPMC, MATLAB/SIMULINK.

In this paper, a solution for the automatic control of a chemical exchange process carbon dioxide (CO2) – carbamate for the 13C isotope enrichment, is presented. The main original achievement from the paper is the inclusion of the previously mentioned non-linear technological process in a control structure. The design of the automatic control structure of the 13C isotope concentration is based on the Internal Model Control (IMC) strategy. The implementation details of all the elements from the structure of the proposed control system, in MATLAB/SIMULINK, are presented. Also, some relevant simulations of the automatic control structure are presented.

ISO 14649 standard, commonly recognized as STEP-NC is a data model interface for computer numerical controllers. STEP-NC goes much further that G codes and has a more comprehensive data model that overcomes the lack of process information in ISO 6983 files (G codes programming). The STEP compliant approach brings the possibility to integrate the machine controller to the overall enterprise information network, with the intention of having bi-directional data flow. This will provide the novel capability for upstream feedback of information from the numerical controller to the design and process areas in the process planning and manufacturing. This paper presents the key concepts of the proposed STEP Convertor of the STEP-CNC Mapping System. The objective of the main system is to take a generic STEP file as the input to drive a CNC machine tool. The main system is broken down into two main sub-systems, STEP Convertor and STEP-NC Translator. This paper will focus solely on the information structure and conceptualization of the STEP Convertor.

In this paper, a mechanical design oriented Python program development system was created to assist engineers to manage their programming assets more efficiently. This cloud-based platform includes a content management system and Python-in-browser IDE (Integrated Development Environment). The motivation of this research is to allow mechanical designers to store their programs and design data locally and remotely in synchronous. This paper introduces the basic concept of the platform, architecture, installation and utilization, and the advantages that can be achieved by using this platform. This platform is released under the GPL V3 license.

This paper proposes a storage-independent model for SPARQL-to-SQL translation algorithm based on relational view. During the development of Web ontology researches, the study for translation from SPARQL to SQL still remain issue. Previous researches focus on efficient and complete translation from SPARQL queries into equivalent SQL queries. However, these translation algorithms depend on specific structure of storages. When we modify the structure of storage, the translation algorithm also should be modified suitable changed structure of storage. This motivates us to study the issue of a model for independent use upon storage structures of an algorithm, which can then be guaranteed independency between translation algorithms and storages by generating relational view, and it improves application and usability of a translation algorithm. In addition, this paper show experiment result about accuracy and no data loss rate of query results on several storages.

This paper shows the steps of structural synthesis and analysis, kinematic synthesis and analysis and CAD constructive design of a reconfigurable modular anthropomorphic gripper with three fingers. Modularity refers to the fact that the gripper variants can be obtained with only two modules, namely a platform and a finger. Reconfigurability refers to the fact that the main variants of the gripper can be obtained by changing the relative position of the fingers. It is demonstrated that the three-finger gripper has four main configurations that provide important functionality even reported to the functionality of a three-finger gripper with continuous reconfigurability. To verify correct operation, functional CAD simulation is performed, and for dynamic operation simulation, we turn to the advanced software ADAMS. An important advantage of this type of gripper, compared to those with continuous reconfigurability, is much lower price at a relatively good functionality for current robotic gripping operations. The paper makes possible subsequent turn to prototype, testing the gripper operation, as it is mounted on an industrial robot, and optimization of its operation by equipping it with contact sensors. The simulation of the gripper operation in virtual environment and data transmission to the real gripper is a solution of interest that will be studied in future research.

Mobile wireless communication is the fastest growing segment of the communication industry. However, it is faced with the challenge of providing reliable high-speed communications due to channel impediments which change over time in unpredictable ways. To analyze the reliability and performance of real communication system, the Rayleigh fading channel is generally applied to simulate the real wireless communication. In this paper, we analyze and implement a flat Rayleigh fading channel based on the inverse discrete Fourier transform (IDFT). The simulation results of level crossing rate (LCR) and average fade duration (AFD) are shown in this paper.

This paper proposed a spelling error detection and correction using the linguistic features and knowledge resource. The linguistic features mainly come from language model that describes the probability of a sentence. In practice, the formal document with typos is defective and fall short of the specifications, since typos and error hidden in printed document are frequent, rework will cause the waste of paper and ink. This paper proposed an approach that addresses the spelling errors and before printing. In this method, the linguistic features are used in this research to compare and increase a new feature additionally that is a function of Internet search based on knowledge bases. Combining these research manners, this paper expect to achieve the goals of confirming, improving the detection rate of typos, and reducing the waste of resources. Experimental results shows, the proposed method is practicable and efficient for users to detect the typos in the printed documents.

An intrusion is a series of relevant actions that occur to a victim in some sequence through the Internet. In this paper, a serial episode mining is first applied to find all possible sophisticated Internet attacks, and then an episode pruning skill is applied to cut unnecessary ones to reduce administrator’s further effort. Input data, log files from a honeypot system, is regarded as a sequence of events, where each event has an associated time of occurrence. The method proposed in this paper can be used to detect abnormal Internet episodes including unknown attacks. Some experiments had been conducted to show the effectiveness of the proposed method.

In present, manufacturing organizations in some countries will have to submitinformation to both internal and external to the organization, called circular mail to report newswithin the organization or external relations. Administrative officer is responsibility about to senda circular mail for each organization and will be responsible for receiving letters in paper form orpublication or media message. Then the administrative officer will be read and extracted the letterand send a message in the form of emails to receivers as indicated on the letter. In mailings sendsuch potential attacks from disgruntled individuals; such as a change of email messages duringtransmission or identity thieves use a fake email address to send officials to the other party. If anattack occurs, the organization will make a loss. In terms of stability credibility and security in theuse of corporate email. This paper presents a model and how to send an email or letter online ina format that is more stable and secure by the applied technology of public key cryptography andhash function to encrypt the message to provide stability and security in the mail's circulars online.

This paper deals with issue of properties specification for software verifications and translation between formal languages. Through this paper, the unique framework of property specifications including most kinds of formal specifications logics, automatic methods are shown by a property specifications guided system and PVSL(The Pattern based Visual property Specification Language).Additionally, a properties to specify and structures, Interconnection of them are also described by property charts. In this study, the pattern based visual property specification language (PVSL) is defined and property specifications method is also designed by convenience specifications of required property.Required properties can be described by its charts and analyzes its meaning and structures as using patterns diagrams and property and-or tree. On the other hands, it also guarantees stability and limitation of utilizations of patterns using much stronger specifying Dwyer`s meaning based property classification. The PVSL and property charts use hierarchical state machine notation to take advantage of knowledge a person who is one of practitioners has as much as possible, and for Nu-SMV, CW-CNC. They can be adapted to describe property charts and analyze into examples of CTL(Computation Tree Logic) and Modal Mu-Calculus logic that have been already used.Keywords: Patterns, Property specifications, model checking, Software verification

In this paper, several data mining techniques were discussed and analyzed in order to achieve the objective of human daily activities recognition based on a continuous sensing data set. The data mining techniques of decision tree, Naïve Bayes and Neural Network were successfully applied to the data set. The paper also proposed an idea of combining the Neural Network with the Decision Tree, the result shows that it works much better than the typical Neural Network and the typical Decision Tree model.

In view of the inefficiency and the poor flexibility of the recent intelligent lighting control system, this paper proposes a new control method starting from sensor, controller and LED driver circuit, meanwhile connecting with the Internet of things technologies. The most striking feature of this control is that it is refactored in the aspect of the whole system, which can reach the purposes of scene control, timing control, multi-zone control and remote control, etc. This paper also elaborates the hardware circuit design and the working principle of the control system and the method to realize the remote control. The system can operate simply, control efficiently, transmit reliably, manage easily.