Search

Biped robot with heterogeneous legs (BRHL) is a new pattern humanoid robot. This paper first introduces the conception, research purpose and configuration of HRHL. Then coordinated dynamics model and magneto-rheological (MR) damper model are given. In the end, this paper discusses the control model of BRHL and gives combined control simulation. The result indicates that intelligent bionic leg controlled by MR damper can track artificial leg’s gait well.

This paper discusses and analyzes the development process of economic type mechanical engraving machine, including the system overall layout, structure scheme, the movement mode of numerical control system, mechanical system design process and the design process of the control system and the "mechanical engraving" the choice of interpolation algorithm, analysis and implementation process. Compared to the same function of the CNC engraving machine, has certain advantages in terms of price, to fill the gaps in the domestic and foreign enterprises, to meet the market demand.

In this paper, the multilayer frame structure containing sheet crack was researched. Based on wavelet analysis theory, the finite element method was applied to analyze the dynamic characteristics of structural damage. Established a method about the identification of containing sheet crack frame structure by modulus maxima of wavelet coefficients to determine the location of the crack, it verifies the validity of the method through calculation analysis of damage identification to a two layers of a cross frame structure containing sheet crack. The conclusions of this paper can be used for frame structure damage diagnosis application reference.

This paper designs a multi parameter real-time water quality on-line monitoring system for aquaculture water. This system achieves the online monitoring among temperature, turbidity, DO (dissolved oxygen), pH and electrical conductivity. The crosstalk, produced by the simultaneous measurement with DO and pH sensors, will affect accuracy and stability of monitoring results. This paper analyzes the source of crosstalk, describes a circuit model of causing crosstalk, and designs an isolated circuit between powers and signals as well. The experimental results show that, the real-time monitoring of DO and pH has the characteristics of speediness, high precision, small error and low noise.

Oculomotor plant and saccade generator are the basics of the saccadic system. The purpose of this paper is mainly focused on mathematical models of horizontal eye movement system. In this respect, it is presented a model for the mechanics of horizontal eye movement. The oculomotor system is presented incorporates known physiological dynamics and musculotendon complex geometry. Developing muscle strength can be described by a two-component version of the model Hill and consists of a passive and active contractile component. The active component includes force-velocity and force-length characteristics of the muscle. Passive component accounts for elastic and viscous effects. Couple neuronal activation dynamics controls that is appropriate for judder from muscle mechanics.

This paper briefly introduces the design, construction and wave attenuation effect test of a kind of floating breakwater sheltering deep water aquaculture. This novel floating breakwater structure is composed of 28 standard modules and corresponding anchoring systems, and each standard module comprises a catamaran raft and a wave-attenuating and oscillation-inhibiting device, with a length of 30 m, a width of 7 m, a depth of 2 m and a draft of 1.1 m. Each catamaran raft employs a box-shaped multi-ribbed beam-and-slab structure, and was constructed using high-performance concrete and ferrocement materials and internally filled with polystyrene foam plastics. Each wave-attenuating and oscillation-inhibiting device uses a detachable split box-shaped structure and was pre-fabricated using high-performance concrete, with a length of 2 m, a width of 1.638 m and a height of 2 m. Each standard module is anchored using 6 anchor chains, each of which has an on-floor length of about 25 m. After construction, this floating breakwater system was tested for wave attenuation effect, and the data analysis results show that the floating breakwater system has a wave attenuation effect of up to 50 %.

The location and the overall arrangement of the charging stations is an important problem with the development of electric vehicles. It is related to the charging needs, city planning, service level of charging station, geographic location and competitive ability and so on. A distribution model of EV charging station is introduced in the paper. In order to describe the model preferably, this paper introduces the attractive factor of charging stations and the area-different factor. The model can give the charging station rational positions by analyzing the data of the traffic flow and the electric-consuming-rate of cars on the road. A case study is given to illustrate the applying the model.

This paper presents a analytical method to calculate the minimum clamping force to prevent slippage between the workpiece and spherical-tipped fixture elements during milling process. After the contact deformation between the workpiece and spherical-tipped fixture element is determined, the relationships between the workpiece displacement and the contact deformations are obtained. Based on the static equilibrium equations, these equations are combined and linear equations are obtained to calculate the tangential contact forces between the workpiece and spherical-tipped fixture element. According to the maximum tangential contact force, the minimum clamping force to prevent slippage between the workpiece and spherical-tipped fixture elements is calculated. At last, this method is illustrated with a simulation example.

Focus on equipment maintenance support informationization basic requirements, this paper introduced certain ordnance equipment maintenance support system based on B/S structure , carried on preliminary discussion on design of equipment integrated support system, gave a preliminary analysis and research on design ideas, system structure and function, auxiliary module.

On the basis of human factors analysis of driver error accidents, this paper establishes the accident-causing index system due to driver errors and puts forward the use of trapezoidal fuzzy hierarchy - the grey correlation analysis method to analyze the accident-causing index model due to driver errors. Then this paper uses related data and proposed analysis method to obtain the weights order of accident-causing factors. The results reveal the main cause of accidents due to driver errors, and provide the reference for further research to prevent the traffic accidents.

Microsoft office Excel is an important part of the Microsoft Office suite of software that can be processed, statistical analysis of various data, with its quick style and rich functionality has been generally welcomed, but with the database networking and sharing trends deepening, Excel application bottlenecks in stand-alone mode began to appear, and the network is the computer information technology in today's inevitable end, I imagine combining ADO technology developed by Delphi Excel data server in order to break this limitation, changes in non-network applications Excel mode.Excel Data Server is a set of services and client program, the server deployed on the server, the client is retrieved by the query language SQL, Excel data file can perform various operations and customer interface directly to form a Web-based application systems, customer service not only to support the application at both ends of the LAN, you can also support the application on the Internet. In this paper, Delphi7.0 support, using ADO and RemObjects SDK tools to develop an Excel data server. RemObjects referred to RO. RO version a lot, but it is recommended to use RemObjects Data Abstract 6.0.43.801, Delphi's experience in the development of it appear to be more stable, server-side and client-side data connections and programming efficiency, data manipulation more convenient.

Coal gangue is a byproduct of mining process, filling the gangue in the road embankment can reduce the pollution caused by the gangue accumulation. Because the formation and type of rock is different, the performance of gangue is different. In this paper, the main types of gangue of Handan & Xingtai coal mining area was taken laboratory test, the mechanical properties and chemical properties of different gangues were compared to determine the feasibility of gangue filling in the road embankment, and the performance law of coal gangue.

This paper presents a numerical procedure for modelling the thermal performance of ventilated hollow core slabs (VHCS). A turbulence model suitable for this purpose is identified first by considering a smooth horizontal pipe subjected to turbulent mixed convention conditions typical of VHCSs. Comparison of the fully-developed dimensionless velocity (u+) and temperature (T+) profiles as well as the Nusselt numbers (Nu) predicted by five different turbulence models against empirical expressions available in the literature shows that the Standard and Realisable k-ε models provide the best overall predictions of u+, T+ and Nu. Since the Standard k-ε model gives slightly better estimates of the Nu values, it is adopted to model the thermal performance of a VHCS geometry for which experimental thermal responses are reported in the literature. The numerical predictions of local temperatures within the VHCS agree well with the experimental measurements, and hence the Standard k-ε model is recommended here for the modeling of VHCSs.

By analyzing the oilfield wireless monitoring system, the paper puts forward an oilfield monitoring system framework based on ZigBee wireless sensor networks on basic of studying ZigBee standard communication protocol. Software and hardware of data acquisition and transmission are designed in this system. The fast network and wireless transmission are realized.

This paper proposes an auto-focus method that is based on Ostu segment. The method uses the variance of the two classes of the segment results as the guidance of the auto-focus system. This guidance function responses to wide range of object distance range, it has a strong anti jamming ability and it provides a wide range of the guidance value. The result shows that this method can work well and the time it takes to focus is unconcerned to the position when the focus process starts and it responses to a wide range of object distance.

In this paper, a wavelet-based pipeline inspection method was illustrated experimentally. Piezoelectric ceramic (PZT5), as sensors, was used to generate and receive the guided wave signal. To be specific, a piezoelectric ring was an excitation sensor in order to generate L(0,2) mode guided wave and 16 evenly distributed piezoelectric patches in pipe circle were the reception sensors. A transverse artificial notch in the pipe wall could be detected successfully by the guided wave. For reducing the noise from the testing signal, a wavelet-based denoise technique was proposed Based on the denoised signal, both location and size of the defect could be identified. The result shows that the crack size identification was in good agreement with the theoretical prediction.

Reverse engineering is an important tool to generate CAD models. This paper describes an integrated approach for modeling parts from point cloud to surfaces or solids based on features and constraints. The approach allows designers to integrate reverse engineering and feature-based CAD system in the reconstruction of parts. This approach has two advantages over current practice and the reconstructed models produced by this method are feature-based and constraints satisfaction, which provides a higher level description of part geometry rather than the tedious low-level editing of geometric descriptions as in reverse engineering. This method also facilitates modification and innovative design to the reconstructed parts, which would be extremely difficult or impossible to accomplish if current reverse engineering method is applied. In addition, it is a more convenient and practical way for designers. To illustrate the validation of this integrated modeling approach, a more complicated example is illustrated based on the approach.

Based on the analysis of 30 provinces ( except Tibet) in China , this paper used the environmental staffs' number, completed industrial pollution abatement investment amount, waste treatment facilities’ number, the three wastes’ comprehensive utilization output value, and harmless waste treatment capacity as input and output index. The paper evaluated the 30 provinces’ environmental management efficiency (except Tibet) in 2008 and 2009 by Data Envelopment Analysis, then analyzed the time series data of the 30 provinces from 2003 to 2009 by Malmquist index. Study finds that overall Chinese environmental management efficiency’s TFP index is 0.942 in 2009, and decreasing year by year. Besides, it shows that technology is dominant factor of restricting Chinese environmental management efficiency, So, we should increase the investment in science and technology as to improve the efficiency. In addition, the environmental management scale’ expansion and structure optimization are also necessary methods of improving the efficiency.

Considering the contacts between solid and fluid are subjected to dynamic lodes, the influence of vibration characteristic of structure which is coupled with solid and fluid are applied to calculation. In this paper, the calculation formula of structure vibration between solid mass and fluid is derived and the finite element method (FEM) is adopted for discrete of pump station structure and fluid, considering the effect of fluid flow to solid structure, the natural frequency of pump station is acquired. The result shows the method is correct and reasonable.

This paper presents a novel photovoltaic (PV) model for a commercial PV module, which is augmented with an energy balance equation to simultaneously describe cell temperature and PV electricity output characteristics. Having the thermal and electrical characteristics of commercial PV module available from the manufacturer datasheet, the proposed PV model is implemented on the Simulink environment and verified under the standard test condition (STC) and nominal operating cell temperature (NOCT) condition. The NOCT verification with a commercial PV module datasheet is first addressed. Through experimental measurement of a commercial PV module in real operation from June 1 to August 31, 2011, the proposed model demonstrates the good estimation performance of both cell temperatures and output electricity characteristics. Comparing with ones of the other methods, the predicted output characteristics of the proposed model have a better agreement with the measured ones of an operating PV module.

Highway bridges played an important role in lifeline systems. Their seismic damage status made a direct influence on the implement plan of the earthquake relief work and the life and property security of the people. Therefore, accurate assessment and prediction for the seismic damage of highway bridges were of vital significance, based on which reasonable earthquake fortification could be implemented. This paper summarized and classified the existing seismic damage assessment methods for highway bridges, including certain index evaluation methods based on statistical results, vulnerability index evaluation methods based on probability theory and vulnerability index evaluation methods based on aggregation model. Then the capacity-spectrum method which could be used for calculating the fragility curve and the seismic assessment model of highway bridges used in HAZUS were specially explained. At last, the proposal for the development of seismic assessment systems related with highway bridges in China was put forward. Considering HAZUS’s good performance in seismic assessment, a similar assessment system should be built in China as soon as possible. The first step should be classifying highway bridges in China based on their current situation and obtaining their seismic assessment model parameters roughly, which tend to be safe. The second step should be carrying out sufficient experiments and numerical analysis and revising the model parameters obtained in the first step.

The Propeller Boss Cap Fins (PBCF) is often used to ordinary propeller, a good energy-saving effect being obtained. In order to study the energy-saving mechanism of ducted propeller with PBCF, in this paper, the FLUENT has been taken to simulate the distribution of thrust coefficient, torque coefficient, blade pressure and velocity vector of hub surface at different advance coefficients. By contrasting the results of numerical simulation of hydrodynamic performance of ducted propeller between with fins and without fins, we know that at the low advance coefficient, the ducted propeller with fins will increase the thrust coefficient and decrease the torque coefficient; rising the open water propeller efficiency, improving the efficiency under the premise of the efficiency increase by duct. The existence of fins has changed velocity distribution of water around the hub and made the water that flowed around the propeller hub with propeller rotation direction flow to propeller tail along the fins not gather in the cub, so it weakened the hub vortex.

The function of large sports facilities is complex as the space center of people assembling and the comprehensive displaying of city image and vitality, the importance is undoubted for the design of large sports facilities in fire prevention and safe evacuation. This paper puts forward the design process of fire prevention and evacuation and the method for reasonable division of fire partition. According to the special requirements of large space evacuation, the new idea of safety exit borrowing and setting the inner ring road is introduced, the design of building fire protection and smoke control area to open space is studied as the main characteristics of the large sports facilities.

The firing accuracy of trajectory correction rocket improves significantly after conducting trajectory correction. A trajectory correction rocket repetitious damage effectiveness model was proposed in this paper based on the original rocket damage effectiveness model, difference of repetitious damage effectiveness caused by the improvement of a certain type trajectory correction rocket was researched. Research conclusions have reference value for the determination of trajectory correction rocket accuracy index design, the actual operational use and operational effectiveness evaluation.

Optical ring networks have been widely implemented as the major metro network architectures. However, as the network coverage expands, the system performance of the single ring structure degrades significantly. In this paper, we propose an interconnected ring topology to enhance the network throughput and efficiency. The carried out simulation results have revealed the superiority of employing such an interconnected architecture. We also discuss the increased complexities and fairness issues induced by such design.

The paper presents the general structure and the feedback control method of a compact type of driving simulator, having a mobile suspended seat actuated by pneumatic muscles. The completed simulator is intended to be used as an advertising demonstrator for the university and also for various research projects. In order to better observe the viability and behavior of the proposed feedback structure, a scaled model is constructed using similar pneumatic muscle actuation of a 3+1 DOF suspended mass. For analysis purposes, multi-step pressure and tri-state muscle contraction control is employed. The feedback data is exchanged between the software simulator and the motion control PLC by using a custom software application.

The thick wall pipes have been widely used in the field of petrochemical industry, nuclear power, weapons and special equipment. In this paper, the propagation characteristics of circumferential Lamb wave in thick wall pipe and the interaction law with radial cracks were studied. A large number of simulation were carried out by using the commercial finite element software ABAQUS. The propagation characteristics of circumferential Lamb wave in thick wall pipe were analyzed. The research results show that the propagation process of Lamb wave in thick wall pipes are totally different from with that in the thin wall pipes, the energy distribution in the wall thickness direction are changing constantly. It is hard to evaluate the depth of smaller defects. The influence of various factors on acoustic field distribution should be considered synthetically in the practical inspection, such as the size of crystal, the angle of wedge, the excited signal. So detection sensitivity of the small defects can be improved.

Based on the analysis of the development, defects and motion of present hydraulic system vibrating table, it is divided into several single disciplinary system modes which are organic related in this paper. Establishing unified digital model in integrated simulation environment through analyzing the function of these models, which will guide the design of digital vibration table system.

Cooperative innovation is an important way to improve an enterprise’s independent innovation ability. In this paper, an efficiency evaluation index system of cooperative innovation is set up for China’s manufacturing firstly, then a Data Envelopment Analysis (DEA) clustering model is proposed to classify the cooperative innovation efficiency of each manufacturing industries by pure technical efficiency and scale efficiency separately, finally an empirical study on China’s 28 manufacturing industries is done. Results show that most of China’s manufacturing industries have lower cooperative innovation efficiencies, the lower utilization of science and technology funds at internal payment and industry-university-institute external cooperative payment, and the insufficiency of patent application are the reasons for the lower efficiency in cooperative innovation. Lastly, some suggestions are presented to enterprises, cooperative members and the government for increasing cooperative innovation efficiencies of China’s manufacturing industries.

Simulated annealing algorithm is a mathematic model, which imitates the physical process of annealing. And optical thin film is widely used in many industry, To perform the functions for which they were designed, the films must have proper thickness, roughness and other characteristics. In the paper, the simulated annealing algorithm is used to determine the film optical constant It uses the transmission data through thin film over a range of wavelengths to calculate the thickness. According to the experimental results, the solution found by simulated annealing algorithm is unique and correct.

Tibetan-Chinese named entity extraction is the foundation of cross language information processing, and provides a basis for machine translation and cross language information retrieval research. In this paper, we use the multi-language links of Wikipedia to obtain Tibetan-Chinese comparable corpus, and combine sentence length, word matching and entity boundary words together to get parallel sentence. Then we extract Tibetan-Chinese named entity from the comparable corpus in three ways: (1) Extracting Natural labeling information. (2) Acquiring the links of Tibetan entries and Chinese entries. (3) Using sequence intersection method, which includes the sentence representation, Chinese named entity recognition and corresponding Tibetan sentences intersection. Finally, the results show the extraction method based on comparable corpus is effective.

The subsea connector for manifolds is working in bad conditions. The water environment is harsh. And the inner pressure of the jumper which is connected by the subsea connector is high. In this paper, a new design of metal gasket for the connector is proposed. The metal gasket develops a surface contact with the upper and lower hubs. Under the effect of internal pressure, the seal ring will expand outward to ensure good seal performance. The design has a simple structure, and is easy to manufacture and disassemble .This paper uses the finite element analysis to investigate the gasket’s performance in different working conditions, and provides reference for real tests and the engineering application.

Parameterized model of combine harvester frame is created using the DM module of ANSYS Workbench in this paper. Analysis on the strength and stiffness of the frame is implemented to estimate its safety and economy. According to the analysis result, optimization is made to save material appropriately. Modal analysis of the frame is proceeded to study its natural frequency and compare it with external excitation frequency.

The locality sensitive k-means clustering method has been presented recently. Although this approach can improve the clustering accuracies, it often gains the unstable clustering results because some random samples are employed for the initial centers. In this paper, an initialization method based on the core clusters is used for the locality sensitive k-means clustering. The core clusters can be formed by constructing the σ-neighborhood graph and their centers are regarded as the initial centers of the locality sensitive k-means clustering. To investigate the effectiveness of our approach, several experiments are done on three datasets. Experimental results show that our proposed method can improve the clustering performance compared to the previous locality sensitive k-means clustering.

In this paper, vehicle systems and track-tunnel system are regarded as an interactional, mutual coupling overall system and the interaction between wheel and rail is regarded as the “ligament” of these two subsystems. The vehicle vibration model and vibration equation are established by considering the body vertical vibration, a suspension of vertical vibration and wheelset vertical vibration. By the displacement compatibility condition of the vehicle and track, integrating the vehicle equations and discretized track-tunnel vibration equation, the dynamic coupling model and the equations that reflect the vehicle-track systematicness is constituted. It provides a reference for the further research of the dynamic analysis of vehicle-tunnel coupled system.

Microcontroller Arduino Mega and ATmega is a computer chip that needed and developed to control system or process. Microcontroller Arduino Mega and ATmega can be used to temperature control systems [1][2][3], the room lighting control, security control, the hazard warning [4], scheduling, monitoring water flow and dams actuator door and etc. Most studies on the microcontroller is focused on the functional capability of a microcontroller to read or measure the object. In addition to aspects of good function, microcontroller must have a high sensitivity in order to avoid delay or in-accuracies in the sensor reading measured object such as temperature. Microcontrollers has some advantages and disadvantages of the process accuracy depends on the processor and the ability microcontroller. In this paper focuses on the measurement errors that occur on microcontroller Arduino Mega and ATmega 8535 with a temperature sensor LM 35 and hygrometer digitizes dt05 for the application process cooling and heating sea water controls. The volume of sea water is measured is 3 to 35 litters with a temperature set point 28°C of lower temperatures above 25°C and 31°C. The results show that the maximum error obtained by using microcontroller Arduino Mega is 1,32°C or 13,2 mV and ATmega 8535 is 0,2°C or 2 mV. Also the microcontroller Arduino Mega is more suitable for control temperature measurement in the process of heating and cooling sea water.

This paper completed a reinforced test of eight aging damaged old wooden beams of CFRP, studied the different layers of the CFRP reinforced rectangular failure pattern of the old wooden beams, the bending bearing capacity, load-deflection curve. The results show that reinforced aging old wooden beam repaired with CFRP not only improve the flexural bearing capacity and its failure mode changed from brittle tensile damage to compression of ductile damage.

This paper establishes the shape function of high-pier with non-ideal boundary conditions in the top and uses the energy method to calculate its critical load. Then its effective length factor is achieved by using Euler's formula. Further, the FEM and energy method are respect used to calculate the effective length factor of the engineering example and comparative analysis is carried on. Results show that: The non-ideal boundary conditions have great influence on the effective length factor and should be considered in the calculation. The result from the formula of energy method is nearly the same as the one from the FEM which demonstrates this method is of good accuracy to calculate the effective length factor of high-pier. In addition, it is also of great convenience in the design of high-piers.

Development of cracks is the most common cause of premature deterioration in structures. For the design of reinforced concrete structures, crack width is one of the most important factors to be considered. It also affects the serviceability of reinforced concrete members. This paper presents the experimental study on crack width evaluation of R.C beams and comparison with various international codes. Following international codes: Eurocode2 1992-1 (2009), Egyptian Code ECP203-2007, ACI Code 318-95, 318-05, BS 8110-1997/IS: 456-2000 was used to calculate the crack width for comparison purpose.

The real salt cores from drill-site was regarded as the prototype in this experiment. They are used to simulate solution mining process of salt caverns. In this paper the mathematical model of solution mining wasset up.Experimental parameters are obtained by similarity ratio. Afternumerous experiments on the artificial salt rock model,the results show that thecontrol experimental parametersand the references design are effective.This researchhas some guidance on field engineering of solution mining construction.

This paper presents the effect of surface roughness on soft elastohydrodynamic lubrication in circular contact with non-Newtonian lubricant. The time independent modified Reynolds equation, elastic equation and lubricant viscosity equation were formulated for compressible fluid. Perturbation method, Newton-Raphson method, finite different method and full adaptive multigrid method were implemented to obtain the film pressure, film thickness profiles and friction coefficient in the contact region at various the amplitude of surface roughness, surface speed of sphere, modulus of elasticity and radius of sphere. The simulation results showed that the film thickness in contact region depended on the profile of surface roughness. The minimum film thickness decreased but maximum film pressure and friction coefficient increase when the amplitude of surface roughness and modulus of elasticity increased. For increasing surface speeds, the minimum film thickness and friction coefficient increase but maximum film pressure decreases. When radius of sphere increases, the minimum film thickness increases but maximum film pressure and friction coefficient decrease.

Image is the unity structure and texture, structure reflects to the contours and the boundaries between different regions in the image, and the texture is a reflection of the details within an area in the image, therefore the optimal restoration effect can not be achieved if structure or texture is considered separately during the process of image restoration. In order to solve the problems above, the corresponding solution proposed in this paper is as follows: first, the structural characteristics of the image to be repaired are obtained by using pulse coupled neural network; then both the textural features and the structural features are taken into consideration simultaneously when it comes to the priority of the image restoration as well as the calculation of the optimal sample block. It can be seen from the experimental results that the algorithm described herein can effectively improve the quality of image restoration.

In the cement production process, cement quality is the most important indicator. One way to measure the quality of the cement is the cement particle size. Only the cement particle size is symmetrical and the specific surface area could reach the national standard that this kind of cement is qualified products. In actual production, the specific surface area is tested in laboratory through experiment. This process takes a long time, and the instantaneous value of specific surface area can not be got. This paper, auxiliary variables coming from the practical production site are used to get an instantaneous value through fuzzy control algorithm and other rules. VC++ 6.0 is used to program this algorithm. After a long period of actual operation, this method is proved to be effective, the instantaneous specific surface area is got and the precision is acceptable. This could guide the operator to change parameters of the equipment timely. This could be widely used and is easy to spread.

New U (moment) implements the optimum water section of rectangular slot structure, besides all advantages of the traditional U and T-shaped slot in the canal seepage, also has advantages of reducing covers area of higher performance and price ratio. The kind of canal seepage control structure is upgrading products of the traditional U and T-shaped slot. In this paper, through design research on new U (moment) slot structure, giving U (moment) slot structure size, it can provide technical support for the product development of new type U (moment).

Audio and video technology, multimedia technology and computer network technology are used in the stage video surveillance and scheduling system based on IP network, which is modern stage surveillance system.The stage video surveillance and scheduling system plays a decisive role in performance, so the performance of the key equipments must be apprehended.In this paper, the components of the system are briefly introduced;then analyze needed of the pivotal equipments in detail: network video, streaming media server and the IP SAN performance.

Most common types of bucket wheels were analyzed by finite elements method in this paper. Also, relevant diagnostics parameters are defined for various constructions (stress concentration, deformation energy, distribution of potential and kinetic energy for main oscillation shapes). This approach enabled identification of weak spots and selection of such types of bucket wheel which are most suitable for specific working conditions on open cast mine.

IP traceback can be used to confirm locations of attackers, stop on-going attacks, and take legal actions against attackers, and then impede attackers. This paper describes the background where IP traceback problem generates, and presents what the functions of IP traceback are. Furthermore, this paper classifies existing IP traceback methods and analyzes advantages and disadvantages of each method. In addition, future researches on IP traceback are proposed. This paper is of valuable reference for network researchers and engineers to be engaged in the further study on IP traceback.

It is difficult to obtain fine weld seam of underwater welding because of the water environment, this paper used arc sensor to obtain electrical information of the under water wet welding process, and BP neural network was used to model the process, experiment results showed the model could predict the process precisely, this laid the foundation for further controlling the welding quality automatically.

The traction motor installed on the high-speed train is powered by inverter. A large number of harmonics may appear when motor is operating. Then the motor speed generate oscillation and finally the dynamic characteristic is affected in vehicle system. In this paper, relied on the electromagnetism of traction motor, the mechanism about emerging harmonic torque is analyzed. In addition, based on the equivalent circuit, the method of calculating the parameters in harmonic circuit is proposed. Two mathematical formulas are also proposed to obtain the fundamental electromagnetic torque and the harmonic electromagnetic torque on traction motor. The time domain and frequency domain distributions of the torques are gained and analyzed. Finally a calculation example of traction motor harmonic torque was analyzed and calculated, and prepared for further study of harmonic torque impacting on vehicle system dynamic performance.

This paper puts forward the suitable conditions of high sulphur fuel oil in China wire mesh particle trap counter blowing regeneration technology. The regeneration process is characterized by the filter body is separated from particle combustion, solve the problem of broken filter body and burning-out, at the same time remove the not burning material in the trap. By filtering body regeneration experiment made the counter blowing regeneration scheme, design and optimization of the diesel exhaust particulate trap wire mesh filter body and counter blowing regeneration system. Finally by engine bench test, test the diesel exhaust particulate after-treatment device influence on power performance and fuel economy of diesel engine, the jet pressure, jet time and scavenging time on back and collection efficiency effect.