Search

A bidirectional (Bi) DC/DC converter is one of the key components in a hybrid energy storage system for electric vehicles and plug-in electric vehicles. Based on the detailed analysis of the losses in the converter, this paper firstly develops a model to theoretically calculate the efficiency of the converter. Then, the influences of temperature, switching frequency, duty cycle and material of switching device on the converter’s efficiency are experimentally investigated. The analysis of the experimental results has shown that (1) The efficiency at the switching frequency of 15 kHz is about 2% higher than that of 25 kHz. (2) The efficiency at 25 °C is similar to that at 85 °C for the MOSFET SiC while the efficiency at 25 °C is 2% higher than that at 85 °C for the IGBT Si for both buck and boost modes. (3) In buck mode, when the duty cycles are decreasing from 66.7%, 50% to 33.33%, the peak efficiencies are also decreasing from 97.6%, 94.5% to 90.3%, respectively. In boost mode, when the duty cycle is increasing from 33.33%, 50% to 75%, the peak efficiency is decreasing from 96.9%, 96.5% to 92.4%, respectively. (4) The developed model can calculate the converter’s efficiency accurately [ABSTRACT FROM AUTHOR]

Due to the strong nonlinearity and complex time-variant property of batteries, the existing state of charge (SOC) estimation approaches based on a single equivalent circuit model (ECM) cannot provide the accurate SOC for the entire discharging period. This paper aims to present a novel SOC estimation approach based on a multiple ECMs fusion method for improving the practical application performance. In the proposed approach, three battery ECMs, namely the Thevenin model, the double polarization model and the 3rd order RC model, are selected to describe the dynamic voltage of lithium-ion batteries and the genetic algorithm is then used to determine the model parameters. The linear matrix inequality-based H-infinity technique is employed to estimate the SOC from the three models and the Bayes theorem-based probability method is employed to determine the optimal weights for synthesizing the SOCs estimated from the three models. Two types of lithium-ion batteries are used to verify the feasibility and robustness of the proposed approach. The results indicate that the proposed approach can improve the accuracy and reliability of the SOC estimation against uncertain battery materials and inaccurate initial states. [ABSTRACT FROM AUTHOR]