Search

Abstract: Buildings’ thermal-energetic assessment and the relative proposal of new technical solutions applied to both summer and winter analyses has a strategic role in increasing the year-round performance of buildings. Buildings’ dynamic analysis is by now a well-established procedure to study effective building energy performance given real climate considerations. Then in this work, a concise and effective methodology for analyzing buildings’ thermal performance in a dynamic environment is proposed and applied to different case studies, consisting of single-family residential buildings’ prototypes. This procedure is aimed to define different performance levels by proper non-dimensional indexes named thermal deviation indexes (TDI). These indexes values could express in a concise way buildings’ thermal behavior, different optimization strategies impact, sensitivity analysis results. Buildings’ prototypes representing the case studies are three free-floating houses where the architectural shape role and the sensitivity of different envelope features are analyzed, also supported by experimental results regarding envelope properties measured on existing residential buildings in Italy. The three prototypes are respectively designed to optimize summer or winter energy performance or to represent the typical Italian house before and after energy efficiency regulation is implemented. To better define the important envelope parameters necessary to calibrate the numerical models, experimental activities are conducted. In particular, thermal insulation level and roof reflectance, characterized by means of spectrophotometrical measurements, are measured both in the case of an old traditional Italian building and in the case of a modern building. The results of the dynamic analysis are expressed in terms of TDI values, to define buildings’ thermal performance with respect to the variation of all the considered architectural and envelope’s properties (i.e. architectural layout, mass and insulation, roof reflectance, Solar Heat Gain Coefficients of windows’ glasses, weather data) within a specific climatic context. For validating the proposed method, the obtained TDI results are compared with those obtained from existing procedures. In particular, the TDI values are correlated to an adaptive comfort indicator, for verifying how much the TDI could be effective for evaluating free-running buildings thermal performance during both summer and winter. [Copyright &y& Elsevier]

• Aging problem for a wall package with vacuum insulation panels is studied. • Measures of heat flux and temperatures for 5 years are compared. • Experimental and analytical elaborations are combined for finding the aging trend. • The aging curve is implemented in a case study by means of dynamic simulation tool. • Energy consumptions, environmental indices and cost savings are discussed. The lack of data on the aging rate, under real operating conditions, is one of the most critical aspects for the diffusion of vacuum insulation panels in the building sector. This problem is analyzed in this paper by means of an integrated experimental-numerical approach. The panels under investigation are characterized by micro-porous silica pressed powder core with an aluminum barrier layer, for a total thickness of 10 mm. These are the insulation layer of a wall made of autoclaved aerated concrete blocks (total thickness of 21 cm) placed in a test room located in Benevento (south Italy). The experimental analysis is focused on the monitoring of heat flux and temperatures in order to evaluate the performance by means of the comparison with the same wall without insulation and for the indirect determination of the aging after five years (2015–2020). Results indicate an increment of thermal conductivity of 10.6%. Moreover, basing on experimental data, a semi-empirical linear function is appropriate to approximate the aging trend. A numerical case study, that implement the obtained aging trend, shows that the increment of thermal conductivity of vacuum insulation panels brings a reduction of the expected energy saving of 3% after 15 years. This result is true for several European cities with heating dominated climates. [ABSTRACT FROM AUTHOR]