Search

Electric-Steam Integrated Energy Systems (ES-IES) have garnered considerable attention in industrial applications due to their high energy utilization efficiency and energy density. Nonetheless, the limited thermal storage capacity of the steam system impacts the stability of ES-IES, posing a challenge for its implementation in scenarios with a high proportion of renewable energy sources. To address this limitation, this study demonstrates how the integration of a Steam Accumulator (SA) can enhance the stability of ES-IES through a dynamic simulation-based approach. Firstly, a novel method for simulating the steam system is introduced. This method utilizes a resolution-adaptive strategy based on the central implicit difference format to balance simulation accuracy and speed. Furthermore, a simulation framework for ES-IES is delineated, detailing the solution order of subsystems and system coupling interface parameter interaction method. Meanwhile, a comprehensive model and solution for the SA are proposed, aligning well with the aforementioned ES-IES simulation methods in terms of accuracy and complexity. Finally, case study demonstrated that equipping SA in ES-IES can effectively reduce its fault-recovery time by 57.9%, highlighting the efficacy of SA in promoting system stability and security. • A steam accumulator dynamic model and solution. • A novel steam system dynamic simulation approach. • An ES-IES simulation framework. • Fault-state ES-IES operation stability improvement. [ABSTRACT FROM AUTHOR]

As a result of the increased penetration of intermittent renewable energy sources, Combined Heat and Power (CHP) units are being looked upon as one of the sources that might provide for the ever growing need for electrical flexibility. However, CHP units are often considered as must-run units on the grid for their main purpose is generally to cover the heat demand of an adjoining District Heating Network (DHN). This paper demonstrates how a CHP–DHN system may be used as a frequency reserve without excessively compromising the lifetime of the CHP, using either a specific storage tank or the DHN's thermal inertia in order to compensate for the resulting heat imbalance. In the latter case, it is shown that a buffer tank, although smaller than a specific Thermal Energy Storage (TES), is required due to restrictions for acceptable DHN temperature gradients. In both approaches, the size of the tank has been mapped out considering frequency reserve's duration and capacity. The results show that a simplistic static model of the DHN is sufficient for the design of a specific TES, while a detailed dynamic simulation is required when the DHN is used as storage, to prevent overestimating the flexibility of the CHP–DHN system. This research could be used to assess the potential for improving CHP–DHN systems flexibility, using them as frequency reserves, and to design the required storage or buffer tanks. • A control strategy to use a CHP-DHN system as a frequency reserve is proposed. • Dedicated storage tanks and/or DHN thermal inertia are used. • The DHN can be used as heat storage, but a buffer tank is required. • A detailed dynamic DHN model is needed to determine the DHN flexibility. • The flexibility of the CHP–DHN system was determined for 370 MW CHP. [ABSTRACT FROM AUTHOR]