Search

Well-defined Pd/Ga-nanoparticles were prepared and used as a precursor for the methanol active component in a bifunctional syngas-to-dimethyl ether catalyst. In situ X-ray absorption spectroscopy experiments were employed both to unravel the initial formation of the active catalyst phase in reductive H 2 atmosphere and to further monitor changes of the nanoparticles under conditions of dimethyl ether synthesis at a pressure up to 20 bar (250 °C). The catalytic studies were conducted using simulated biomass-derived, CO-rich syngas in a continuous-flow reactor, with the bifunctional catalyst offering the two types of active sites, i.e. for methanol synthesis (Pd/Ga nanoparticles) and its subsequent dehydration (γ-Al 2 O 3 ), in close proximity. As compared to the conventional Cu/Zn-based reference catalyst prepared via a similar procedure, the Pd/Ga-based catalyst showed a promising activity together with a notable stability with time on stream and a high temperature tolerance (up to 300 °C). A kinetic model which considers the individual reactions involved in direct DME synthesis based on power law equations was used to fit the experimental data, and the apparent activation energies were compared to the Cu/Zn-based catalyst.

Hybrid catalysts were prepared using well-defined, colloidal Cu/Zn-based nanoparticles as building units. The nanoparticles were immobilized on acidic supports (i.e., γ-Al2O3, HZSM-5, and HY) to yield a series of bifunctional catalysts with a close proximity of active sites for both methanol synthesis and its further conversion to dimethyl ether (DME) or hydrocarbons (HCs). By this model kit principle, a high comparability of the bifunctional catalysts was ensured. The catalysts were characterized in depth regarding their structure and catalytic performance in the conversion of CO-rich synthesis gas. In situ XAS studies demonstrated the formation of the active phase under reducing conditions. The present study revealed important material parameters to control activity and selectivity of the bifunctional catalysts either towards DME or liquefied petroleum gas (LPG) products in the direct conversion of simulated biomass-derived synthesis gas. In particular, Cu loading, pore structure and Si:Al ratio were investigated.