Search

Seven cellulase preparations from Penicillium and Trichoderma spp. were evaluated for their ability to hydrolyze the cellulose fraction of hardwoods (yellow poplar and red maple) pretreated by organosolv extraction, as well as model cellulosic substrates such as filter paper. There was no significant correlation among hydrolytic performance on pretreated hardwood, based on glucose release, and filter paper activity. However, performance on pretreated hardwood showed significant correlations to the levels of endogenous beta-glucosidase and xylanase activities in the cellulase preparation. Accordingly, differences in performance were reduced or eliminated following supplementation with a crude beta-glucosidase preparation containing both activities. These results complement a previous investigation using softwoods pretreated by either organosolv extraction or steam explosion. Cellulase preparations that performed best on hardwood also showed superior performance on the softwood substrates.

Economic barriers preventing commercialization of lignocellulose-to-ethanol bioconversion processes include the high cost of hydrolytic enzymes. One strategy for cost reduction is to improve the specific activities of cellulases by genetic engineering. However, screening for improved activity typically uses "ideal" cellulosic substrates, and results are not necessarily applicable to more realistic substrates such as pretreated hardwoods and softwoods. For lignocellulosic substrates, nonproductive binding and inactivation of enzymes by the lignin component appear to be important factors limiting catalytic efficiency. A better understanding of these factors could allow engineering of cellulases with improved activity based on reduced enzyme-lignin interaction ("weak lignin-binding cellulases"). To prove this concept, we have shown that naturally occurring cellulases with similar catalytic activity on a model cellulosic substrate can differ significantly in their affinities for lignin. Moreover, although cellulose-binding domains (CBDs) are hydrophobic and probably participate in lignin binding, we show that cellulases lacking CBDs also have a high affinity for lignin, indicating the presence of lignin-binding sites on the catalytic domain.

A batch reactor was employed to steam explode corn fiber at various degrees of severity to evaluate the potential of using this feedstock as part of an enzymatically mediated cellulose-to-ethanol process. Severity was controlled by altering temperature (150–230°C), residence time (1–9 min), and SO2 concentration (0–6% [w/w] dry matter). The effects of varying the different parameters were assessed by response surface modeling. The results indicated that maximum sugar yields (hemicellulose-derived water soluble, and cellulose-derived following enzymatic hydrolysis) were recovered from corn fiber pretreated at 190°C for 5 minutes after exposure to 3% SO2. Sequential SO2-catalyzed steam explosion and enzymatic hydrolysis resulted in a conversion efficiency of 81% of the combined original hemicellulose and cellulose in the corn fiber to monomeric sugars. An additional posthydrolysis step performed on water soluble hemicellulose stream increased the concentration of sugars available for fermentation by 10%, resulting in the high conversion efficiency of 91%. Saccharomyces cerevisiae was able to ferment the resultant corn fiber hydrolysates, perhydrolysate, and liquid fraction from the posthydrolysis steps to 89, 94, and 85% of theoretical ethanol conversion, respectively. It was apparent that all of the parameters investigated during the steam explosion pretreatment had a significant effect on sugar recovery, inhibitory formation, enzymatic conversion efficiency, and fermentation capacity of the yeast.

Softwoods are generally considered to be one of the most difficult lignocellulosic feedstocks to hydrolyze to sugars for fermentation, primarily owing to the nature and amount of lignin. If the inhibitory effect of lignin can be significantly reduced, softwoods may become a more useful feedstock for the bioconversion processes. Moreover, strategies developed to reduce problems with softwood lignin may also provide a means to enhance the processing of other lignocellulosic substrates. The Forest Products Biotechnology Group at the University of British Columbia has been developing softwood-to-ethanol processes with SO2-catalyzed steam explosion and ethanol organosolv pretreatments. Lignin from the steam explosion process has relatively low reactivity and, consequently, low product value, compared with the high-value coproduct that can be obtained through organosolv. The technical and economic challenges of both processes are presented, together with suggestions for future process development.

Softwood residues are the most abundant feedstock available for bioconversion in many northern countries. However, the high costs for delignification and enzymatic hydrolysis currently deter commercialization of softwood bioconversion processes. This study evaluates the abilities of two novel fungal preparations (MSUBC1 and MSUBC2) and two commercial cellulase preparations (TR1 and TR2) to hydrolyze cellulose in Douglas-firpretreated by steam explosion or ethanol organosolv process. MSUBC1 showed significantly better performance than the other preparations on both lignocellulosic substrates. In particular, MSUBC1 achieved76% cellulose conversion for hydrolysis of steam-exploded Douglas-fir (approximately 44% lignin) after 72 h at low enzyme loading (10 filter paper units/g of cellulose) and without beta-glucosidase supplementation.

A batch reactor was employed to steam explode corn fiber at various degrees of severity to evaluate the potential of using this feedstock as part of an enzymatically mediated cellulose-to-ethanol process. Severity was controlled by altering temperature (150-230 degrees C), residence time (1-9 min), and SO2 concentration (0-6% [w/w] dry matter). The effects of varying the different parameters were assessed by response surface modeling. The results indicated that maximum sugar yields (hemicellulose-derived water soluble, and cellulose-derived following enzymatic hydrolysis) were recovered from corn fiber pretreated at 190 degrees C for 5 minutes after exposure to 3% SO2. Sequential SO2-catalyzed steam explosion and enzymatic hydrolysis resulted in a conversion efficiency of 81% of the combined original hemicellulose and cellulose in the corn fiber to monomeric sugars. An additional posthydrolysis step performed on water soluble hemicellulose stream increased the concentration of sugars available for fermentation by 10%, resulting in the high conversion efficiency of 91%. Saccharomyces cerevisiae was able to ferment the resultant corn fiber hydrolysates, perhydrolysate, and liquid fraction from the posthydrolysis steps to 89, 94, and 85% of theoretical ethanol conversion, respectively. It was apparent that all of the parameters investigated during the steam explosion pretreatment had a significant effect on sugar recovery, inhibitory formation, enzymatic conversion efficiency, and fermentation capacity of the yeast.