Search

Engineered stones are often characterized for their crystalline silica content. Their organic composition, particularly that of the emissions generated during fabrication work using hand-held power tools, is relatively unexplored. We forensically screened the emissions from dry-cutting 12 engineered stone products in a test chamber for their organic composition by pyrolysis-gas chromatography-mass spectrometry (GC-MS) plus selected traditional capture and analysis techniques. Phthalic anhydride, which has a Respiratory Sensitization (RSEN) Notation by the American Conference of Governmental Industrial Hygienists (ACGIH), was the most common and abundant compound, at 26–85% of the total organic composition of engineered stone emissions. Benzaldehyde and styrene were also present in all twelve samples. During active cutting, the predominant volatile organic compound (VOC) emitted was styrene, with phthalic anhydride, benzene, ethylbenzene, and toluene also detected. These results have important health implications as styrene and phthalic anhydride are irritants to the respiratory tract. This study suggests a risk of concurrent exposure to high levels of respirable crystalline silica and organic lung irritants during engineered stone fabrication work. [ABSTRACT FROM AUTHOR]

An Australian National Dust Disease Taskforce was established to address the re-emergence of occupational lung disease, in particular silicosis. Exposure to respirable crystalline silica (RCS) occurs in various industries in Australia. We asked occupational hygienists about their practical experiences and perspectives on RCS exposure and regulatory action. A total of 105 members of the Australian Institute of Occupational Hygienists completed an anonymous questionnaire, which addressed individual characteristics, experience, perceived level of employer awareness, effectiveness of current regulation, and recommendations for improvement, across three main industrial sectors. Based on professional experience, 71% were concerned about the potential for RCS over-exposure. Barriers to adequate exposure control included lack of management commitment and financial resources. The employment of specialist occupational hygiene inspectors was considered to be the most effective regulatory strategy. Given the large number of exposed workers in the construction industry, with only a moderate awareness, there is the potential for significant cost shifting of the burden of occupational lung disease from employers on to individuals and the public health system. A nationally consistent approach to RCS exposure control across all industrial sectors is now recommended, with an increased focus on measuring and controlling exposure. [ABSTRACT FROM AUTHOR]

Concerns have been raised for the health and wellbeing of self-employed workers. Musicians are the 'original' gig workers, and musicians have a high prevalence of musculoskeletal symptoms (MSSs). Studies of musicians' MSSs have typically focused on classical, employer-employed musicians; leaving self-employed musicians under-investigated. We investigated the prevalence of MSS outcomes in all types of professional musicians, and compared the MSS outcomes between self-employed and employer-employed musicians. We conducted a cross-sectional study of professional musicians. Given the large proportion of musicians who were both self-employed and employer-employed, three groups were compared: self-employed only (self-employed group), employer-employed only (employer-employed group), and both self-employed and employer-employed (both group) musicians. Multivariable regression analyses were conducted. A total of 225 professional musicians were included in the study, 87.9% of whom reported MSSs in the last 12 months. For MSSs that impaired musical activity, the 12-month prevalence was 43.2%. Musicians in the self-employed group reported a significantly higher 7-day prevalence of MSSs compared with those in the employer-employed group. Compared with musicians in the employer-employed group, musicians in the both group reported a higher 12-month prevalence of MSSs that impaired musical activity. A higher proportion of symptomatic musicians in the both group reported seeing a health professional for their MSSs, compared with the employer-employed group. Similarly, symptomatic musicians in the both group reported higher ratings of emotional impact from MSSs, compared with symptomatic musicians in the employer-employed group. The majority of musicians have experienced MSSs. Several significant differences were reported between the three groups of musicians, with musicians in the both group generally reporting poorer MSS outcomes, compared with musicians in the employer-employed group. There are several potential reasons for why musicians who are both self-employed and employer-employed appear to have poorer MSS outcomes, including the stress of balancing multiple demands. Further research is required into the risk factors for MSS outcomes in self-employed musicians, including those who are both self-employed and employer-employed, and interventions should be directed towards self-employed musicians to minimise the MSS burden. [ABSTRACT FROM AUTHOR]

Artificial stone (AS) is a composite material that has seen widespread use in construction, particularly for kitchen benchtops. However, fabrication processes with AS have been associated with serious lung disease. Safety data sheets (SDSs) aim to provide important information pertaining to composition and health risks. In the case of a complex mixture, SDSs may be problematic in terms of specific information on overall health risks. To assess this issue, we compared empirically determined mineral, metallic, and organic resin content of 25 individual AS products across six suppliers, with the corresponding SDS information. X-ray diffraction was used to quantitate the mineralogical components of AS samples, and X-ray fluorescence was used to estimate the metallic components. Organic material (resin content) was estimated using weight loss during calcination. Although the resin content for all AS samples was within the SDS-reported ranges, there was considerable variability in the crystalline silica content when comparing with supplier's SDS. Potentially toxicologically relevant metallic and mineral constituents were not reported. Some supplier SDSs were found to provide more information than others. Only one of the six suppliers provided crystalline mineral content other than silica, and only two suppliers provided any information about metals. There remains a limited understanding of lung pathogenesis from AS, and this study highlights the need for more comprehensive and standardized SDS information for risk assessment and management. [ABSTRACT FROM AUTHOR]

The authors reflect on the history of the conferences and exhibitions of the Australian Institute of Occupational Hygienists Inc. (AIOH) and the highlights of the organization's 40th anniversary virtual symposium in 2020. Topics include the AIOH's membership to the Asian Network of Occupational Hygiene (ANOH) and the Occupational Hygiene Training Association (OHTA), and how the virtual symposium was planned and implemented.

Owing to their volatility, the most important occupational exposure route for low-molecular-weight amines is considered to be inhalation. However, dermal exposure is also possible in many workplace situations. There are limited data available on the dermal uptake of these amines through human skin, and existing exposure standard skin notations are typically based on acute toxicity animal studies or by chemical analogy. This gap in knowledge is in part due to a lack of standardized approach for assessing dermal uptake. We describe a relatively simple protocol for the determination of permeation of low-molecular-weight amines through human skin in vitro. Using isopropylamine as a test amine, it was found that isopropylamine vapour has limited capacity to absorb into, or penetrate through, the epidermal layer of human skin, even at lethal atmospheric concentrations. This protocol can be adapted for a range of exposure scenarios, including clothing effects, and may be used to determine whether skin notations are warranted. [ABSTRACT FROM AUTHOR]

Ethylene oxide (EO) is a reactive gas used by numerous industries and medical facilities as a sterilant, a fumigant, and as a chemical intermediate in chemical manufacturing. Due to its common use, EO has been involved in a number of leaks and explosive incidents/accidents requiring HAZMAT response. However, the extent of skin absorption under short-term HAZMAT conditions has not been directly assessed. Such data would assist decision making by first responders regarding skin decontamination in EO HAZMAT incidents. An in vitro test protocol with human skin was used for EO exposures at 800 ppm and 3000 ppm. No evidence of dermal penetration was seen for 800 ppm EO during a 30-min challenge. For 3000 ppm, EO penetration was observed after 20 min and was greater under higher temperature/humidity conditions. Fabric (heavy cotton) on skin enhanced penetration 5-fold compared with naked skin. Off gassing from exposed fabric was rapid. The results show dermal uptake of EO vapour from exposure at 3000 ppm is small but clothing may contribute to further dermal absorption/penetration over time. For exposed, but asymptomatic, persons in EO HAZMAT incidents first responders should remove bulky clothing to prevent potential skin damage and further uptake. [ABSTRACT FROM AUTHOR]