Search

The physical protection system is a set of essential components for the protection of nuclear power plants against all types of threats. There are two methods for analyzing the protection systems effectiveness such as the performance method and the compliance method. In this study, the performance method is used to analyze and evaluate the physical protection system based on the Estimate of Adversary Sequence Interruption (EASI) model. The performance approach makes it possible to evaluate the functioning of the physical protection system elements to verify the overall of the protection system effectiveness. The performance method is easy to apply and gives effective results. The physical protection system effectiveness depends on the nature of the threat, either internal or external.

This article presents a neutronic investigation of the effect of replacing some uranium zirconium hydride (U-ZrH1.6) fuels with thorium-based mixed-oxide ((Th,U)O2) fuels in the TRIGA Mark-II research reactor without changing the core geometry, while the only variable is the fuel material. The possibility of utilizing thorium mixed oxide fuel in the TRIGA Mark-II reactor is assessed using the famous seed-blanket configuration or also known as Radkowsky Thorium Fuel (RTF) concept. Using the RTF concept, a long core lifetime can be achieved by enhancing the internal conversion rate of fertile to fissile materials, thanks to the thermal capture cross-section of 232Th that is around three times that of 238U. Additionally, on the fuel cycle aspect of using the thorium-based fuel is that the thorium cycle produces much less plutonium and other transuranic radioactive elements than uranium fuel cycle. Actually, neutronic and kinetic calculations, at the beginning of life conditions, for nine different seed-blanket configurations have been investigated using the MCNPX2.6 code. These calculations for all proposed configurations in comparison with the conventional U-ZrH1.6 fueled core were performed to pick out an optimal core(s) design ensuring the most efficient use of (Th,U)O2 fuel in it and with minimum changes in the main safety parameters. The parameters consist of effective multiplication factor k e f f , delayed neutron fraction β eff , neutron flux distribution, power distribution and radial hot rod power peaking factor ( F HR ), and shutdown margin (SDM). The calculation results exhibit that the highest initial criticality achieved is 1.07716. The results of the other neutronic investigations of thorium-based mixed-oxide fuel elements and their positions, including their numbers in the core are summarized and discussed in the following paper.

The Atoms For Peace Reactor (AFPR-100), as a 100 MW(e) without the need of on-site refueling, was originally based on UO2 TRISO fuel coated particles embedded in a carbon matrix directly cooled by light water. AFPR-100 is considered as a small nuclear reactor without open-vessel refueling which is proposed by Pacific Northwest National Laboratory (PNNL). An account of significant irradiation swelling in the silicon carbide fission product barrier coating layer of TRISO fuel element, a Spherical Cermet Fuel element has been proposed. Indeed, the new fuel concept, which was developed by PNNL, consists of changing the pyro-carbon and ceramic coatings that are incompatible with low temperature by Zirconium. The latter was chosen to avoid any potential Wigner energy effect issues in the TRISO fuel element. Actually, the purpose of this study is to assess the goal of AFPR-100 concept using the Cermet fuel; undeniably, the fuel core lifetime prediction may be extended for reasonably long period without on-site refueling. In fact, we investigated some neutronic parameters of reactor core by the calculation code SRAC95. The results suggest that the core fuel lifetime beyond 12 equivalent full power years (EFPYs) is possible. Hence, the adoption of Cermet fuel concept shows a core lifetime decrease of about 3.1 EFPY.