Search

Raman spectra (532 nm diode laser) of gypsum, syngenite and görgeyite powders were studied from 273 to 83 K every −10 K. Although it was found that not all the Raman peaks are temperature-sensitive, the effect of temperature on the Raman signal of some bands was modelled. It was observed that the main bands of the three sulfates shift toward higher wavenumbers as temperature decreases. The strengthening of the bonds causes an increase in energy and, consequently, higher wavenumbers. However, –OH bands shift depending on the crystal structure they acquire as the temperature decreases, so not all –OH bands behave in the same way. Finally, the gypsum –OH bands change to more ordered crystalline structures with decreasing temperature, so their bandwidths become narrower and sharper.

Citizen science and related engagement programmes have proliferated in recent years throughout the sciences but have been reasonably limited in the cryospheric sciences. In the semiarid Andes we at the Centro de Estudios Avanzados en Zonas Áridas have developed a range of initiatives together with the wider community and stakeholder institutions to improve our understanding of the role snow and ice play in headwater catchments. In this paper we reflect on ongoing engagement with communities living and working in and near study sites of cryospheric science in northern Chile as a strategy that can both strengthen the research being done and empower local communities. [ABSTRACT FROM AUTHOR]

Over the past 70 years, many different components of the cryosphere have been imaged with a variety of radar systems using increasingly sophisticated processing techniques. These systems use various pulse lengths, signal frequencies and, in some cases, modulated signals. The increasing diversity of radar systems has created the potential for confusion due to the use of non-consistent terminology. Here we provide an overview of state-of-the-science radar technologies and suggest a simplified and unified terminology for use by the cryosphere community. We recommend a terminology that is target independent but specifies the characteristics of the signal. Following this recommendation, commercial impulse systems that penetrate the subsurface should be referred to as ground-penetrating radar (GPR), and pulse radars as radio-echo sounding (RES). Continuous-wave (CW) radar systems should be referred to as ground-penetrating CW radars. We further suggest any additional characterisation of the system be expressed using descriptors that specify the platform it is mounted on (e.g. airborne) or the frequency range (e.g. HF (high frequency)) or modulation (e.g. FM (frequency modulated)). [ABSTRACT FROM AUTHOR]

Raman spectra (532 nm diode laser) of gypsum, syngenite and görgeyite powders were studied from 273 to 83 K every −10 K. Although it was found that not all the Raman peaks are temperature-sensitive, the effect of temperature on the Raman signal of some bands was modelled. It was observed that the main bands of the three sulfates shift toward higher wavenumbers as temperature decreases. The strengthening of the bonds causes an increase in energy and, consequently, higher wavenumbers. However, –OH bands shift depending on the crystal structure they acquire as the temperature decreases, so not all –OH bands behave in the same way. Finally, the gypsum –OH bands change to more ordered crystalline structures with decreasing temperature, so their bandwidths become narrower and sharper. [ABSTRACT FROM AUTHOR]

Citizen science and related engagement programmes have proliferated in recent years throughout the sciences but have been reasonably limited in the cryospheric sciences. In the semiarid Andes we at the Centro de Estudios Avanzados en Zonas Áridas have developed a range of initiatives together with the wider community and stakeholder institutions to improve our understanding of the role snow and ice play in headwater catchments. In this paper we reflect on ongoing engagement with communities living and working in and near study sites of cryospheric science in northern Chile as a strategy that can both strengthen the research being done and empower local communities.

Over the past 70 years, many different components of the cryosphere have been imaged with a variety of radar systems using increasingly sophisticated processing techniques. These systems use various pulse lengths, signal frequencies and, in some cases, modulated signals. The increasing diversity of radar systems has created the potential for confusion due to the use of non-consistent terminology. Here we provide an overview of state-of-the-science radar technologies and suggest a simplified and unified terminology for use by the cryosphere community. We recommend a terminology that is target independent but specifies the characteristics of the signal. Following this recommendation, commercial impulse systems that penetrate the subsurface should be referred to as ground-penetrating radar (GPR), and pulse radars as radio-echo sounding (RES). Continuous-wave (CW) radar systems should be referred to as ground-penetrating CW radars. We further suggest any additional characterisation of the system be expressed using descriptors that specify the platform it is mounted on (e.g. airborne) or the frequency range (e.g. HF (high frequency)) or modulation (e.g. FM (frequency modulated)).

Citizen science and related engagement programmes have proliferated in recent years throughout the sciences but have been reasonably limited in the cryospheric sciences. In the semiarid Andes we at the Centro de Estudios Avanzados en Zonas Áridas have developed a range of initiatives together with the wider community and stakeholder institutions to improve our understanding of the role snow and ice play in headwater catchments. In this paper we reflect on ongoing engagement with communities living and working in and near study sites of cryospheric science in northern Chile as a strategy that can both strengthen the research being done and empower local communities. [ABSTRACT FROM AUTHOR]

Over the past 70 years, many different components of the cryosphere have been imaged with a variety of radar systems using increasingly sophisticated processing techniques. These systems use various pulse lengths, signal frequencies and, in some cases, modulated signals. The increasing diversity of radar systems has created the potential for confusion due to the use of non-consistent terminology. Here we provide an overview of state-of-the-science radar technologies and suggest a simplified and unified terminology for use by the cryosphere community. We recommend a terminology that is target independent but specifies the characteristics of the signal. Following this recommendation, commercial impulse systems that penetrate the subsurface should be referred to as ground-penetrating radar (GPR), and pulse radars as radio-echo sounding (RES). Continuous-wave (CW) radar systems should be referred to as ground-penetrating CW radars. We further suggest any additional characterisation of the system be expressed using descriptors that specify the platform it is mounted on (e.g. airborne) or the frequency range (e.g. HF (high frequency)) or modulation (e.g. FM (frequency modulated)). [ABSTRACT FROM AUTHOR]

We compared elastic moduli in polar firn derived from diving wave refraction seismic velocity analysis, firn-core density measurements and microstructure modelling based on firn-core data. The seismic data were obtained with a small electrodynamic vibrator source near Kohnen Station, East Antarctica. The analysis of diving waves resulted in velocity–depth profiles for different wave types (P-, SH- and SV-waves). Dynamic elastic moduli of firn were derived by combining P- and S-wave velocities and densities obtained from firn-core measurements. The structural finite-element method (FEM) was used to calculate the components of the elastic tensor from firn microstructure derived from X-ray tomography of firn-core samples at depths of 10, 42, 71 and 99 m, providing static elastic moduli. Shear and bulk moduli range from 0.39 to 2.42 GPa and 0.68 to 2.42 GPa, respectively. The elastic moduli from seismic observations and the structural FEM agree within 8.5% for the deepest achieved values at a depth of 71 m, and are within the uncertainty range. Our observations demonstrate that the elastic moduli of the firn can be consistently obtained from two independent methods which are based on dynamic (seismic) and static (tomography and FEM) observations, respectively, for deeper layers in the firn below ~10 m depth.

To simulate a glacial lake outburst flood, we employ a comprehensive physically based general two-phase mass flow model (Pudasaini, 2012). This model accounts for a strong interaction between the solid and fluid phases and incorporates buoyancy and other dominant physical aspects of the mass flows such as enhanced non-Newtonian viscous stress, virtual mass force and generalized drag. Our real two-phase mass flow simulation describes explicit evolution of the solid and fluid phases and the debris bulk as a whole, akin to torrential debris flows or debris floods during glacial lake outburst floods (GLOFs). The emptying of a lake following rapid collapse of a restraining dam, the consequent downslope motion of a mixed solid–fluid mass, and the tendency of the mass to form extruding plumes are analyzed in detail for different flow configurations, volumes, conduit geometries and boundary conditions. The solid and fluid phases evolve completely differently and reveal fundamentally different dynamical behaviours. During the flow, the relatively long fluid tail follows the solid-rich dense frontal surge head. The bulk debris develops into a frontal and side levee as derived from the initial frontal moraine dam. Results show that our high-resolution, unified simulation strategies and the advanced model equations can be applied to study the flow dynamics of a wide range of geophysical mass flows such as snow and rock–ice avalanches, debris flows and flash floods as well as GLOFs. This may help substantially in forming a basis for appropriate mitigation measures against potential natural hazards in high mountain slopes and valleys.

To simulate a glacial lake outburst flood, we employ a comprehensive physically based general two-phase mass flow model (Pudasaini, 2012). This model accounts for a strong interaction between the solid and fluid phases and incorporates buoyancy and other dominant physical aspects of the mass flows such as enhanced non-Newtonian viscous stress, virtual mass force and generalized drag. Our real two-phase mass flow simulation describes explicit evolution of the solid and fluid phases and the debris bulk as a whole, akin to torrential debris flows or debris floods during glacial lake outburst floods (GLOFs). The emptying of a lake following rapid collapse of a restraining dam, the consequent downslope motion of a mixed solid–fluid mass, and the tendency of the mass to form extruding plumes are analyzed in detail for different flow configurations, volumes, conduit geometries and boundary conditions. The solid and fluid phases evolve completely differently and reveal fundamentally different dynamical behaviours. During the flow, the relatively long fluid tail follows the solid-rich dense frontal surge head. The bulk debris develops into a frontal and side levee as derived from the initial frontal moraine dam. Results show that our high-resolution, unified simulation strategies and the advanced model equations can be applied to study the flow dynamics of a wide range of geophysical mass flows such as snow and rock–ice avalanches, debris flows and flash floods as well as GLOFs. This may help substantially in forming a basis for appropriate mitigation measures against potential natural hazards in high mountain slopes and valleys. [ABSTRACT FROM PUBLISHER]

Despite their importance as freshwater reservoirs for downstream river systems, few glaciers in central Chile have been comprehensively surveyed. This study presents ground-penetrating radar (GPR) and field-based observations for characterizing the englacial and basal conditions of Glaciar Olivares Alfa (33°110 S, 70°130 W), central Chilean Andes. Using a 50 MHz radar mounted onto a helicopter platform, data were collected covering large portions of the glacier accumulation and ablation zones. The radar data revealed boundaries of a temperate-ice layer at the base of the eastern body of Glaciar Olivares Alfa which appears to be covered by colder ice that extends throughout large parts of the glacier. The thickness of the temperate ice layer is highly variable across the glacier, being on average 40% of the total ice thickness. Radar data analyses reveal regions of cold ice at the bottom/ base of the glacier and also patterns of highly saturated sediments beneath the glacier. Using GPR data, this study represents the most exhaustive analysis of glacier ice structure performed in the central Chilean Andes. The results will enable improved estimations of the glacier's mass balance and ice dynamics, helping us to understand its further development and its impact on water availability. [ABSTRACT FROM AUTHOR]

The cone penetration test has been successfully used to classify soil for ~100 years. However, it has received only limited contemporary use in frozen geomaterials. The historical and contemporary use of the cone penetration test in various frozen geomaterials is considered here and contemporary data from recent work in polar snow are examined. It is probable that many material physical properties (e.g. density, strength and microstructure) can be obtained directly from cone penetration testing. It appears under-utilized as a contemporary scientific and engineering investigative tool in frozen geomaterials. [ABSTRACT FROM AUTHOR]