Search

Introduction: 3D printing has a wide range of applications in medicine. In surgery, this technique can be used for preoperative planning of complex procedures, production of patient specific implants, as well as training. However, accuracy evaluations of 3D vascular models are rare., Objectives: Aim of this study was to investigate the accuracy of patient-specific 3D-printed aortic anatomies., Methods: Patients suffering from aorto-iliac aneurysms and with indication for treatment were selected on the basis of different anatomy and localization of the aneurysm in the period from January 1st 2014 to May 27th 2016. Six patients with aorto-iliac aneurysms were selected out of the database for 3D-printing. Subsequently, computed tomography (CT) images of the printed 3D-models were compared with the original CT data sets., Results: The mean deviation of the six 3D-vascular models ranged between -0.73 mm and 0.14 mm compared to the original CT-data. The relative deviation of the measured values showed no significant difference between the 3D-vascular and the original patient CT-data., Conclusion: Our results showed that 3D printing has the potential to produce patient-specific 3D vascular models with reliable accuracy. This enables the use of such models for the development of new endovascular procedures and devices., (Copyright © 2020 Elsevier GmbH. All rights reserved.)

Purpose: Today, ultrasound-guided peripheral endovascular interventions have the potential to be an alternative to conventional interventions that are still X-ray and contrast agent based. For the further development of this approach, a research environment is needed that represents the individual patient-specific endovascular properties as realistically as possible. Aim of the project was the construction of a phantom that combines ultrasound capabilities and the possibility to simulate peripheral endovascular interventions., Material and Methods: We designed a modular ultrasound-capable phantom with exchangeable patient specific vascular anatomy. For the manufacturing of the vascular pathologies, we used 3D printing technology. Subsequently, we evaluated the constructed simulator with regards to its application for endovascular development projects., Results: We developed an ultrasound-capable phantom with an exchangeable 3D-printed segment of the femoral artery. This modality allows the study of several patient-specific 3D-printed pathologies. Compared to the flow properties of a human artery (male; age 28) the phantom shows realistic flow properties in the duplex ultrasound image. We proved the feasibility of the simulator by performing an ultrasound-guided endovascular procedure. Overall, the simulator showed realistic intervention conditions., Conclusions: With the help of the constructed simulator, new endovascular procedures and navigation systems, such as ultrasound-guided peripheral vascular interventions, can be further developed. Additionally, in our opinion, the use of such simulators can also reduce the need for animal experiments., (Copyright © 2020 Elsevier GmbH. All rights reserved.)

Purpose: Endovascular interventions have become standard procedures for the therapy of abdominal aortic aneurysms. Therefore, endovascular surgeons need special skills which have to be learned and trained. Additionally, authentic simulators are needed for further development of new endovascular devices and procedures. The aim of this project was to develop an authentic and modular endovascular simulation environment with patient-specific vascular anatomy for training and research purposes., Material and Methods: We first designed a prototype with exchangeable 3D-printed patient-specific vascular anatomy. Then, the feasibility of the prototype was validated by a simulation of an EVAR procedure in a clinical setting., Results: We developed an authentic endovascular simulator with an exchangeable patient-specific vascular anatomy and performed an EVAR procedure under realistic conditions. The evaluation of the accuracy of the vascular models showed little deviation when compared with the original CT data., Conclusion: Endovascular simulators based on patient-specific 3D-printed vascular models can realistically mimic endovascular procedures and have the potential to be used for further development of new devices and grafts as well as for training purposes. Furthermore, in our opinion they can reduce the use of animals during developmental processes., (Copyright © 2020 Elsevier GmbH. All rights reserved.)